[PATCH 4/4] input: misc: introduce retu-pwrbutton

[Aaro Koskinen]

Add Retu power button driver.

Cc: linux-input@xxxxxxxxxxxxxxx
Signed-off-by: Aaro Koskinen <aaro.koskinen@xxxxxx>
---
 drivers/input/misc/Kconfig          |   10 +++
 drivers/input/misc/Makefile         |    1 +
 drivers/input/misc/retu-pwrbutton.c |  127 +++++++++++++++++++++++++++++++++++
 3 files changed, 138 insertions(+), 0 deletions(-)
 create mode 100644 drivers/input/misc/retu-pwrbutton.c

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 7c0f1ec..e5be189 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -367,6 +367,16 @@ config INPUT_CM109
 	  To compile this driver as a module, choose M here: the module will be
 	  called cm109.
 
+config INPUT_RETU_PWRBUTTON
+	tristate "Retu Power button Driver"
+	depends on MFD_RETU
+	help
+	  Say Y here if you want to enable power key reporting via the
+	  Retu chips found in Nokia Internet Tablets (770, N800, N810).
+
+	  To compile this driver as a module, choose M here. The module will
+	  be called retu-pwrbutton.
+
 config INPUT_TWL4030_PWRBUTTON
 	tristate "TWL4030 Power button Driver"
 	depends on TWL4030_CORE
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 83fe6f5..4fbee0d 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_INPUT_PMIC8XXX_PWRKEY)	+= pmic8xxx-pwrkey.o
 obj-$(CONFIG_INPUT_POWERMATE)		+= powermate.o
 obj-$(CONFIG_INPUT_PWM_BEEPER)		+= pwm-beeper.o
 obj-$(CONFIG_INPUT_RB532_BUTTON)	+= rb532_button.o
+obj-$(CONFIG_INPUT_RETU_PWRBUTTON)	+= retu-pwrbutton.o
 obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER)	+= rotary_encoder.o
 obj-$(CONFIG_INPUT_SGI_BTNS)		+= sgi_btns.o
 obj-$(CONFIG_INPUT_SPARCSPKR)		+= sparcspkr.o
diff --git a/drivers/input/misc/retu-pwrbutton.c b/drivers/input/misc/retu-pwrbutton.c
new file mode 100644
index 0000000..f802d4d
--- /dev/null
+++ b/drivers/input/misc/retu-pwrbutton.c
@@ -0,0 +1,127 @@
+/*
+ * Retu power button driver.
+ *
+ * Copyright (C) 2004-2010 Nokia Corporation
+ *
+ * Original code written by Ari Saastamoinen, Juha YrjÃlà and Felipe Balbi.
+ * Converted to use to use Retu MFD driver by Aaro Koskinen.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file "COPYING" in the main directory of this
+ * archive for more details.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/irq.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mfd/retu.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#define RETU_STATUS_PWRONX (1 << 5)
+
+struct retu_pwrbutton {
+	struct input_dev	*idev;
+	struct retu_dev		*rdev;
+	struct device		*dev;
+	bool			pressed;
+	int			irq;
+};
+
+static irqreturn_t retu_pwrbutton_irq(int irq, void *_pwr)
+{
+	struct retu_pwrbutton *pwr = _pwr;
+	bool state;
+
+	state = !(retu_read(pwr->rdev, RETU_REG_STATUS) & RETU_STATUS_PWRONX);
+
+	if (pwr->pressed != state) {
+		input_report_key(pwr->idev, KEY_POWER, state);
+		input_sync(pwr->idev);
+		pwr->pressed = state;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int __devinit retu_pwrbutton_probe(struct platform_device *pdev)
+{
+	struct retu_dev *rdev = dev_get_drvdata(pdev->dev.parent);
+	struct retu_pwrbutton *pwr;
+	int ret;
+
+	pwr = kzalloc(sizeof(*pwr), GFP_KERNEL);
+	if (!pwr)
+		return -ENOMEM;
+
+	pwr->rdev = rdev;
+	pwr->dev  = &pdev->dev;
+	pwr->irq  = platform_get_irq(pdev, 0);
+	platform_set_drvdata(pdev, pwr);
+
+	ret = request_threaded_irq(pwr->irq, NULL, retu_pwrbutton_irq, 0,
+				   "retu-pwrbutton", pwr);
+	if (ret < 0)
+		goto error_irq;
+
+	pwr->idev = input_allocate_device();
+	if (!pwr->idev) {
+		ret = -ENOMEM;
+		goto error_input;
+	}
+
+	pwr->idev->evbit[0]			= BIT_MASK(EV_KEY);
+	pwr->idev->keybit[BIT_WORD(KEY_POWER)]	= BIT_MASK(KEY_POWER);
+	pwr->idev->name				= "retu-pwrbutton";
+
+	ret = input_register_device(pwr->idev);
+	if (ret < 0)
+		goto error_reg;
+
+	return 0;
+
+error_reg:
+	input_free_device(pwr->idev);
+error_input:
+	free_irq(pwr->irq, pwr);
+error_irq:
+	kfree(pwr);
+	return ret;
+}
+
+static int __devexit retu_pwrbutton_remove(struct platform_device *pdev)
+{
+	struct retu_pwrbutton *pwr = platform_get_drvdata(pdev);
+
+	free_irq(pwr->irq, pwr);
+	input_unregister_device(pwr->idev);
+	input_free_device(pwr->idev);
+	kfree(pwr);
+
+	return 0;
+}
+
+static struct platform_driver retu_pwrbutton_driver = {
+	.probe		= retu_pwrbutton_probe,
+	.remove		= __devexit_p(retu_pwrbutton_remove),
+	.driver		= {
+		.name	= "retu-pwrbutton",
+	},
+};
+module_platform_driver(retu_pwrbutton_driver);
+
+MODULE_ALIAS("platform:retu-pwrbutton");
+MODULE_DESCRIPTION("Retu Power Button");
+MODULE_AUTHOR("Ari Saastamoinen");
+MODULE_AUTHOR("Felipe Balbi");
+MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@xxxxxx>");
+MODULE_LICENSE("GPL");
-- 
1.7.2.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/