[PATCH 11/17] mfd: pcrmu: create common header file for legacy mailbox
From: Loic Pallardy
Date: Wed Sep 05 2012 - 06:00:48 EST
Legacy mailbox are used by both 8500 and x540 projects.
Structure and definition should be shared to avoid misalignment.
Signed-off-by: Loic Pallardy <loic.pallardy@xxxxxxxxxxxxxx>
Reviewed-by: Philippe LANGLAIS <philippe.langlais@xxxxxxxxxxxxxx>
Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
drivers/mfd/db8500-prcmu.c | 576 +++++++++++----------------------------------
drivers/mfd/dbx500-prcmu.h | 378 +++++++++++++++++++++++++++++
2 files changed, 518 insertions(+), 436 deletions(-)
create mode 100644 drivers/mfd/dbx500-prcmu.h
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 36f7c1d..96487a0 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -36,6 +36,7 @@
#include <mach/irqs.h>
#include <mach/db8500-regs.h>
#include <mach/id.h>
+#include "dbx500-prcmu.h"
#include "dbx500-prcmu-regs.h"
/* Offset for the firmware version within the TCPM */
@@ -69,202 +70,6 @@
#define PRCM_ROMCODE_P2A 0xFFD
#define PRCM_XP70_CUR_PWR_STATE 0xFFC /* 4 BYTES */
-#define PRCM_SW_RST_REASON 0xFF8 /* 2 bytes */
-
-#define _PRCM_MBOX_HEADER 0xFE8 /* 16 bytes */
-#define PRCM_MBOX_HEADER_REQ_MB0 (_PRCM_MBOX_HEADER + 0x0)
-#define PRCM_MBOX_HEADER_REQ_MB1 (_PRCM_MBOX_HEADER + 0x1)
-#define PRCM_MBOX_HEADER_REQ_MB2 (_PRCM_MBOX_HEADER + 0x2)
-#define PRCM_MBOX_HEADER_REQ_MB3 (_PRCM_MBOX_HEADER + 0x3)
-#define PRCM_MBOX_HEADER_REQ_MB4 (_PRCM_MBOX_HEADER + 0x4)
-#define PRCM_MBOX_HEADER_REQ_MB5 (_PRCM_MBOX_HEADER + 0x5)
-#define PRCM_MBOX_HEADER_ACK_MB0 (_PRCM_MBOX_HEADER + 0x8)
-
-/* Req Mailboxes */
-#define PRCM_REQ_MB0 0xFDC /* 12 bytes */
-#define PRCM_REQ_MB1 0xFD0 /* 12 bytes */
-#define PRCM_REQ_MB2 0xFC0 /* 16 bytes */
-#define PRCM_REQ_MB3 0xE4C /* 372 bytes */
-#define PRCM_REQ_MB4 0xE48 /* 4 bytes */
-#define PRCM_REQ_MB5 0xE44 /* 4 bytes */
-
-/* Ack Mailboxes */
-#define PRCM_ACK_MB0 0xE08 /* 52 bytes */
-#define PRCM_ACK_MB1 0xE04 /* 4 bytes */
-#define PRCM_ACK_MB2 0xE00 /* 4 bytes */
-#define PRCM_ACK_MB3 0xDFC /* 4 bytes */
-#define PRCM_ACK_MB4 0xDF8 /* 4 bytes */
-#define PRCM_ACK_MB5 0xDF4 /* 4 bytes */
-
-/* Mailbox 0 headers */
-#define MB0H_POWER_STATE_TRANS 0
-#define MB0H_CONFIG_WAKEUPS_EXE 1
-#define MB0H_READ_WAKEUP_ACK 3
-#define MB0H_CONFIG_WAKEUPS_SLEEP 4
-
-#define MB0H_WAKEUP_EXE 2
-#define MB0H_WAKEUP_SLEEP 5
-
-/* Mailbox 0 REQs */
-#define PRCM_REQ_MB0_AP_POWER_STATE (PRCM_REQ_MB0 + 0x0)
-#define PRCM_REQ_MB0_AP_PLL_STATE (PRCM_REQ_MB0 + 0x1)
-#define PRCM_REQ_MB0_ULP_CLOCK_STATE (PRCM_REQ_MB0 + 0x2)
-#define PRCM_REQ_MB0_DO_NOT_WFI (PRCM_REQ_MB0 + 0x3)
-#define PRCM_REQ_MB0_WAKEUP_8500 (PRCM_REQ_MB0 + 0x4)
-#define PRCM_REQ_MB0_WAKEUP_4500 (PRCM_REQ_MB0 + 0x8)
-
-/* Mailbox 0 ACKs */
-#define PRCM_ACK_MB0_AP_PWRSTTR_STATUS (PRCM_ACK_MB0 + 0x0)
-#define PRCM_ACK_MB0_READ_POINTER (PRCM_ACK_MB0 + 0x1)
-#define PRCM_ACK_MB0_WAKEUP_0_8500 (PRCM_ACK_MB0 + 0x4)
-#define PRCM_ACK_MB0_WAKEUP_0_4500 (PRCM_ACK_MB0 + 0x8)
-#define PRCM_ACK_MB0_WAKEUP_1_8500 (PRCM_ACK_MB0 + 0x1C)
-#define PRCM_ACK_MB0_WAKEUP_1_4500 (PRCM_ACK_MB0 + 0x20)
-#define PRCM_ACK_MB0_EVENT_4500_NUMBERS 20
-
-/* Mailbox 1 headers */
-#define MB1H_ARM_APE_OPP 0x0
-#define MB1H_RESET_MODEM 0x2
-#define MB1H_REQUEST_APE_OPP_100_VOLT 0x3
-#define MB1H_RELEASE_APE_OPP_100_VOLT 0x4
-#define MB1H_RELEASE_USB_WAKEUP 0x5
-#define MB1H_PLL_ON_OFF 0x6
-
-/* Mailbox 1 Requests */
-#define PRCM_REQ_MB1_ARM_OPP (PRCM_REQ_MB1 + 0x0)
-#define PRCM_REQ_MB1_APE_OPP (PRCM_REQ_MB1 + 0x1)
-#define PRCM_REQ_MB1_PLL_ON_OFF (PRCM_REQ_MB1 + 0x4)
-#define PLL_SOC0_OFF 0x1
-#define PLL_SOC0_ON 0x2
-#define PLL_SOC1_OFF 0x4
-#define PLL_SOC1_ON 0x8
-
-/* Mailbox 1 ACKs */
-#define PRCM_ACK_MB1_CURRENT_ARM_OPP (PRCM_ACK_MB1 + 0x0)
-#define PRCM_ACK_MB1_CURRENT_APE_OPP (PRCM_ACK_MB1 + 0x1)
-#define PRCM_ACK_MB1_APE_VOLTAGE_STATUS (PRCM_ACK_MB1 + 0x2)
-#define PRCM_ACK_MB1_DVFS_STATUS (PRCM_ACK_MB1 + 0x3)
-
-/* Mailbox 2 headers */
-#define MB2H_DPS 0x0
-#define MB2H_AUTO_PWR 0x1
-
-/* Mailbox 2 REQs */
-#define PRCM_REQ_MB2_SVA_MMDSP (PRCM_REQ_MB2 + 0x0)
-#define PRCM_REQ_MB2_SVA_PIPE (PRCM_REQ_MB2 + 0x1)
-#define PRCM_REQ_MB2_SIA_MMDSP (PRCM_REQ_MB2 + 0x2)
-#define PRCM_REQ_MB2_SIA_PIPE (PRCM_REQ_MB2 + 0x3)
-#define PRCM_REQ_MB2_SGA (PRCM_REQ_MB2 + 0x4)
-#define PRCM_REQ_MB2_B2R2_MCDE (PRCM_REQ_MB2 + 0x5)
-#define PRCM_REQ_MB2_ESRAM12 (PRCM_REQ_MB2 + 0x6)
-#define PRCM_REQ_MB2_ESRAM34 (PRCM_REQ_MB2 + 0x7)
-#define PRCM_REQ_MB2_AUTO_PM_SLEEP (PRCM_REQ_MB2 + 0x8)
-#define PRCM_REQ_MB2_AUTO_PM_IDLE (PRCM_REQ_MB2 + 0xC)
-
-/* Mailbox 2 ACKs */
-#define PRCM_ACK_MB2_DPS_STATUS (PRCM_ACK_MB2 + 0x0)
-#define HWACC_PWR_ST_OK 0xFE
-
-/* Mailbox 3 headers */
-#define MB3H_ANC 0x0
-#define MB3H_SIDETONE 0x1
-#define MB3H_SYSCLK 0xE
-
-/* Mailbox 3 Requests */
-#define PRCM_REQ_MB3_ANC_FIR_COEFF (PRCM_REQ_MB3 + 0x0)
-#define PRCM_REQ_MB3_ANC_IIR_COEFF (PRCM_REQ_MB3 + 0x20)
-#define PRCM_REQ_MB3_ANC_SHIFTER (PRCM_REQ_MB3 + 0x60)
-#define PRCM_REQ_MB3_ANC_WARP (PRCM_REQ_MB3 + 0x64)
-#define PRCM_REQ_MB3_SIDETONE_FIR_GAIN (PRCM_REQ_MB3 + 0x68)
-#define PRCM_REQ_MB3_SIDETONE_FIR_COEFF (PRCM_REQ_MB3 + 0x6C)
-#define PRCM_REQ_MB3_SYSCLK_MGT (PRCM_REQ_MB3 + 0x16C)
-
-/* Mailbox 4 headers */
-#define MB4H_DDR_INIT 0x0
-#define MB4H_MEM_ST 0x1
-#define MB4H_HOTDOG 0x12
-#define MB4H_HOTMON 0x13
-#define MB4H_HOT_PERIOD 0x14
-#define MB4H_A9WDOG_CONF 0x16
-#define MB4H_A9WDOG_EN 0x17
-#define MB4H_A9WDOG_DIS 0x18
-#define MB4H_A9WDOG_LOAD 0x19
-#define MB4H_A9WDOG_KICK 0x20
-
-/* Mailbox 4 Requests */
-#define PRCM_REQ_MB4_DDR_ST_AP_SLEEP_IDLE (PRCM_REQ_MB4 + 0x0)
-#define PRCM_REQ_MB4_DDR_ST_AP_DEEP_IDLE (PRCM_REQ_MB4 + 0x1)
-#define PRCM_REQ_MB4_ESRAM0_ST (PRCM_REQ_MB4 + 0x3)
-#define PRCM_REQ_MB4_HOTDOG_THRESHOLD (PRCM_REQ_MB4 + 0x0)
-#define PRCM_REQ_MB4_HOTMON_LOW (PRCM_REQ_MB4 + 0x0)
-#define PRCM_REQ_MB4_HOTMON_HIGH (PRCM_REQ_MB4 + 0x1)
-#define PRCM_REQ_MB4_HOTMON_CONFIG (PRCM_REQ_MB4 + 0x2)
-#define PRCM_REQ_MB4_HOT_PERIOD (PRCM_REQ_MB4 + 0x0)
-#define HOTMON_CONFIG_LOW BIT(0)
-#define HOTMON_CONFIG_HIGH BIT(1)
-#define PRCM_REQ_MB4_A9WDOG_0 (PRCM_REQ_MB4 + 0x0)
-#define PRCM_REQ_MB4_A9WDOG_1 (PRCM_REQ_MB4 + 0x1)
-#define PRCM_REQ_MB4_A9WDOG_2 (PRCM_REQ_MB4 + 0x2)
-#define PRCM_REQ_MB4_A9WDOG_3 (PRCM_REQ_MB4 + 0x3)
-#define A9WDOG_AUTO_OFF_EN BIT(7)
-#define A9WDOG_AUTO_OFF_DIS 0
-#define A9WDOG_ID_MASK 0xf
-
-/* Mailbox 5 Requests */
-#define PRCM_REQ_MB5_I2C_SLAVE_OP (PRCM_REQ_MB5 + 0x0)
-#define PRCM_REQ_MB5_I2C_HW_BITS (PRCM_REQ_MB5 + 0x1)
-#define PRCM_REQ_MB5_I2C_REG (PRCM_REQ_MB5 + 0x2)
-#define PRCM_REQ_MB5_I2C_VAL (PRCM_REQ_MB5 + 0x3)
-#define PRCMU_I2C_WRITE(slave) \
- (((slave) << 1) | (cpu_is_u8500v2() ? BIT(6) : 0))
-#define PRCMU_I2C_READ(slave) \
- (((slave) << 1) | BIT(0) | (cpu_is_u8500v2() ? BIT(6) : 0))
-#define PRCMU_I2C_STOP_EN BIT(3)
-
-/* Mailbox 5 ACKs */
-#define PRCM_ACK_MB5_I2C_STATUS (PRCM_ACK_MB5 + 0x1)
-#define PRCM_ACK_MB5_I2C_VAL (PRCM_ACK_MB5 + 0x3)
-#define I2C_WR_OK 0x1
-#define I2C_RD_OK 0x2
-
-#define NUM_MB 8
-#define MBOX_BIT BIT
-#define ALL_MBOX_BITS (MBOX_BIT(NUM_MB) - 1)
-
-/*
- * Wakeups/IRQs
- */
-
-#define WAKEUP_BIT_RTC BIT(0)
-#define WAKEUP_BIT_RTT0 BIT(1)
-#define WAKEUP_BIT_RTT1 BIT(2)
-#define WAKEUP_BIT_HSI0 BIT(3)
-#define WAKEUP_BIT_HSI1 BIT(4)
-#define WAKEUP_BIT_CA_WAKE BIT(5)
-#define WAKEUP_BIT_USB BIT(6)
-#define WAKEUP_BIT_ABB BIT(7)
-#define WAKEUP_BIT_ABB_FIFO BIT(8)
-#define WAKEUP_BIT_SYSCLK_OK BIT(9)
-#define WAKEUP_BIT_CA_SLEEP BIT(10)
-#define WAKEUP_BIT_AC_WAKE_ACK BIT(11)
-#define WAKEUP_BIT_SIDE_TONE_OK BIT(12)
-#define WAKEUP_BIT_ANC_OK BIT(13)
-#define WAKEUP_BIT_SW_ERROR BIT(14)
-#define WAKEUP_BIT_AC_SLEEP_ACK BIT(15)
-#define WAKEUP_BIT_ARM BIT(17)
-#define WAKEUP_BIT_HOTMON_LOW BIT(18)
-#define WAKEUP_BIT_HOTMON_HIGH BIT(19)
-#define WAKEUP_BIT_MODEM_SW_RESET_REQ BIT(20)
-#define WAKEUP_BIT_GPIO0 BIT(23)
-#define WAKEUP_BIT_GPIO1 BIT(24)
-#define WAKEUP_BIT_GPIO2 BIT(25)
-#define WAKEUP_BIT_GPIO3 BIT(26)
-#define WAKEUP_BIT_GPIO4 BIT(27)
-#define WAKEUP_BIT_GPIO5 BIT(28)
-#define WAKEUP_BIT_GPIO6 BIT(29)
-#define WAKEUP_BIT_GPIO7 BIT(30)
-#define WAKEUP_BIT_GPIO8 BIT(31)
-
static struct {
bool valid;
struct prcmu_fw_version version;
@@ -322,102 +127,6 @@ static u32 prcmu_wakeup_bit[NUM_PRCMU_WAKEUP_INDICES] = {
WAKEUP_ENTRY(ARM)
};
-/*
- * mb0_transfer - state needed for mailbox 0 communication.
- * @lock: The transaction lock.
- * @dbb_events_lock: A lock used to handle concurrent access to (parts of)
- * the request data.
- * @mask_work: Work structure used for (un)masking wakeup interrupts.
- * @req: Request data that need to persist between requests.
- */
-static struct {
- spinlock_t lock;
- spinlock_t dbb_irqs_lock;
- struct work_struct mask_work;
- struct mutex ac_wake_lock;
- struct completion ac_wake_work;
- struct {
- u32 dbb_irqs;
- u32 dbb_wakeups;
- u32 abb_events;
- } req;
-} mb0_transfer;
-
-/*
- * mb1_transfer - state needed for mailbox 1 communication.
- * @lock: The transaction lock.
- * @work: The transaction completion structure.
- * @ape_opp: The current APE OPP.
- * @ack: Reply ("acknowledge") data.
- */
-static struct {
- struct mutex lock;
- struct completion work;
- u8 ape_opp;
- struct {
- u8 header;
- u8 arm_opp;
- u8 ape_opp;
- u8 ape_voltage_status;
- } ack;
-} mb1_transfer;
-
-/*
- * mb2_transfer - state needed for mailbox 2 communication.
- * @lock: The transaction lock.
- * @work: The transaction completion structure.
- * @auto_pm_lock: The autonomous power management configuration lock.
- * @auto_pm_enabled: A flag indicating whether autonomous PM is enabled.
- * @req: Request data that need to persist between requests.
- * @ack: Reply ("acknowledge") data.
- */
-static struct {
- struct mutex lock;
- struct completion work;
- spinlock_t auto_pm_lock;
- bool auto_pm_enabled;
- struct {
- u8 status;
- } ack;
-} mb2_transfer;
-
-/*
- * mb3_transfer - state needed for mailbox 3 communication.
- * @lock: The request lock.
- * @sysclk_lock: A lock used to handle concurrent sysclk requests.
- * @sysclk_work: Work structure used for sysclk requests.
- */
-static struct {
- spinlock_t lock;
- struct mutex sysclk_lock;
- struct completion sysclk_work;
-} mb3_transfer;
-
-/*
- * mb4_transfer - state needed for mailbox 4 communication.
- * @lock: The transaction lock.
- * @work: The transaction completion structure.
- */
-static struct {
- struct mutex lock;
- struct completion work;
-} mb4_transfer;
-
-/*
- * mb5_transfer - state needed for mailbox 5 communication.
- * @lock: The transaction lock.
- * @work: The transaction completion structure.
- * @ack: Reply ("acknowledge") data.
- */
-static struct {
- struct mutex lock;
- struct completion work;
- struct {
- u8 status;
- u8 value;
- } ack;
-} mb5_transfer;
-
static atomic_t ac_wake_req_state = ATOMIC_INIT(0);
/* Spinlocks */
@@ -428,18 +137,13 @@ static DEFINE_SPINLOCK(clkout_lock);
static __iomem void *tcdm_legacy_base;
static __iomem void *tcdm_base;
-struct clk_mgt {
- void __iomem *reg;
- u32 pllsw;
- int branch;
- bool clk38div;
-};
-
-enum {
- PLL_RAW,
- PLL_FIX,
- PLL_DIV
-};
+/* mailbox definition */
+static struct mb0_transfer mb0;
+static struct mb1_transfer mb1;
+static struct mb2_transfer mb2;
+static struct mb3_transfer mb3;
+static struct mb4_transfer mb4;
+static struct mb5_transfer mb5;
static DEFINE_SPINLOCK(clk_mgt_lock);
@@ -774,7 +478,7 @@ int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll)
BUG_ON((state < PRCMU_AP_SLEEP) || (PRCMU_AP_DEEP_IDLE < state));
- spin_lock_irqsave(&mb0_transfer.lock, flags);
+ spin_lock_irqsave(&mb0.lock, flags);
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
cpu_relax();
@@ -789,7 +493,7 @@ int db8500_prcmu_set_power_state(u8 state, bool keep_ulp_clk, bool keep_ap_pll)
writeb(0, (tcdm_legacy_base + PRCM_REQ_MB0_DO_NOT_WFI));
writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
- spin_unlock_irqrestore(&mb0_transfer.lock, flags);
+ spin_unlock_irqrestore(&mb0.lock, flags);
return 0;
}
@@ -912,7 +616,7 @@ int db8500_prcmu_copy_gic_settings(void)
return 0;
}
-/* This function should only be called while mb0_transfer.lock is held. */
+/* This function should only be called while mb0.lock is held. */
static void config_wakeups(void)
{
const u8 header[2] = {
@@ -925,10 +629,10 @@ static void config_wakeups(void)
u32 abb_events;
unsigned int i;
- dbb_events = mb0_transfer.req.dbb_irqs | mb0_transfer.req.dbb_wakeups;
+ dbb_events = mb0.req.dbb_irqs | mb0.req.dbb_wakeups;
dbb_events |= (WAKEUP_BIT_AC_WAKE_ACK | WAKEUP_BIT_AC_SLEEP_ACK);
- abb_events = mb0_transfer.req.abb_events;
+ abb_events = mb0.req.abb_events;
if ((dbb_events == last_dbb_events) && (abb_events == last_abb_events))
return;
@@ -958,24 +662,24 @@ static void db8500_prcmu_enable_wakeups(u32 wakeups)
bits |= prcmu_wakeup_bit[i];
}
- spin_lock_irqsave(&mb0_transfer.lock, flags);
+ spin_lock_irqsave(&mb0.lock, flags);
- mb0_transfer.req.dbb_wakeups = bits;
+ mb0.req.dbb_wakeups = bits;
config_wakeups();
- spin_unlock_irqrestore(&mb0_transfer.lock, flags);
+ spin_unlock_irqrestore(&mb0.lock, flags);
}
static void db8500_prcmu_config_abb_event_readout(u32 abb_events)
{
unsigned long flags;
- spin_lock_irqsave(&mb0_transfer.lock, flags);
+ spin_lock_irqsave(&mb0.lock, flags);
- mb0_transfer.req.abb_events = abb_events;
+ mb0.req.abb_events = abb_events;
config_wakeups();
- spin_unlock_irqrestore(&mb0_transfer.lock, flags);
+ spin_unlock_irqrestore(&mb0.lock, flags);
}
static void db8500_prcmu_get_abb_event_buffer(void __iomem **buf)
@@ -1002,7 +706,7 @@ static int db8500_prcmu_set_arm_opp(u8 opp)
r = 0;
- mutex_lock(&mb1_transfer.lock);
+ mutex_lock(&mb1.lock);
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
cpu_relax();
@@ -1012,13 +716,13 @@ static int db8500_prcmu_set_arm_opp(u8 opp)
writeb(APE_NO_CHANGE, (tcdm_legacy_base + PRCM_REQ_MB1_APE_OPP));
writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
- wait_for_completion(&mb1_transfer.work);
+ wait_for_completion(&mb1.work);
- if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) ||
- (mb1_transfer.ack.arm_opp != opp))
+ if ((mb1.ack.header != MB1H_ARM_APE_OPP) ||
+ (mb1.ack.arm_opp != opp))
r = -EIO;
- mutex_unlock(&mb1_transfer.lock);
+ mutex_unlock(&mb1.lock);
return r;
}
@@ -1118,15 +822,15 @@ static int db8500_prcmu_set_ape_opp(u8 opp)
{
int r = 0;
- if (opp == mb1_transfer.ape_opp)
+ if (opp == mb1.ape_opp)
return 0;
- mutex_lock(&mb1_transfer.lock);
+ mutex_lock(&mb1.lock);
- if (mb1_transfer.ape_opp == APE_50_PARTLY_25_OPP)
+ if (mb1.ape_opp == APE_50_PARTLY_25_OPP)
request_even_slower_clocks(false);
- if ((opp != APE_100_OPP) && (mb1_transfer.ape_opp != APE_100_OPP))
+ if ((opp != APE_100_OPP) && (mb1.ape_opp != APE_100_OPP))
goto skip_message;
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
@@ -1138,20 +842,20 @@ static int db8500_prcmu_set_ape_opp(u8 opp)
(tcdm_legacy_base + PRCM_REQ_MB1_APE_OPP));
writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
- wait_for_completion(&mb1_transfer.work);
+ wait_for_completion(&mb1.work);
- if ((mb1_transfer.ack.header != MB1H_ARM_APE_OPP) ||
- (mb1_transfer.ack.ape_opp != opp))
+ if ((mb1.ack.header != MB1H_ARM_APE_OPP) ||
+ (mb1.ack.ape_opp != opp))
r = -EIO;
skip_message:
if ((!r && (opp == APE_50_PARTLY_25_OPP)) ||
- (r && (mb1_transfer.ape_opp == APE_50_PARTLY_25_OPP)))
+ (r && (mb1.ape_opp == APE_50_PARTLY_25_OPP)))
request_even_slower_clocks(true);
if (!r)
- mb1_transfer.ape_opp = opp;
+ mb1.ape_opp = opp;
- mutex_unlock(&mb1_transfer.lock);
+ mutex_unlock(&mb1.lock);
return r;
}
@@ -1178,7 +882,7 @@ static int db8500_prcmu_request_ape_opp_100_voltage(bool enable)
u8 header;
static unsigned int requests;
- mutex_lock(&mb1_transfer.lock);
+ mutex_lock(&mb1.lock);
if (enable) {
if (0 != requests++)
@@ -1200,14 +904,14 @@ static int db8500_prcmu_request_ape_opp_100_voltage(bool enable)
writeb(header, (tcdm_legacy_base + PRCM_MBOX_HEADER_REQ_MB1));
writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
- wait_for_completion(&mb1_transfer.work);
+ wait_for_completion(&mb1.work);
- if ((mb1_transfer.ack.header != header) ||
- ((mb1_transfer.ack.ape_voltage_status & BIT(0)) != 0))
+ if ((mb1.ack.header != header) ||
+ ((mb1.ack.ape_voltage_status & BIT(0)) != 0))
r = -EIO;
unlock_and_return:
- mutex_unlock(&mb1_transfer.lock);
+ mutex_unlock(&mb1.lock);
return r;
}
@@ -1221,7 +925,7 @@ int prcmu_release_usb_wakeup_state(void)
{
int r = 0;
- mutex_lock(&mb1_transfer.lock);
+ mutex_lock(&mb1.lock);
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
cpu_relax();
@@ -1230,13 +934,13 @@ int prcmu_release_usb_wakeup_state(void)
(tcdm_legacy_base + PRCM_MBOX_HEADER_REQ_MB1));
writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
- wait_for_completion(&mb1_transfer.work);
+ wait_for_completion(&mb1.work);
- if ((mb1_transfer.ack.header != MB1H_RELEASE_USB_WAKEUP) ||
- ((mb1_transfer.ack.ape_voltage_status & BIT(0)) != 0))
+ if ((mb1.ack.header != MB1H_RELEASE_USB_WAKEUP) ||
+ ((mb1.ack.ape_voltage_status & BIT(0)) != 0))
r = -EIO;
- mutex_unlock(&mb1_transfer.lock);
+ mutex_unlock(&mb1.lock);
return r;
}
@@ -1252,7 +956,7 @@ static int request_pll(u8 clock, bool enable)
else
return -EINVAL;
- mutex_lock(&mb1_transfer.lock);
+ mutex_lock(&mb1.lock);
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
cpu_relax();
@@ -1261,12 +965,12 @@ static int request_pll(u8 clock, bool enable)
writeb(clock, (tcdm_legacy_base + PRCM_REQ_MB1_PLL_ON_OFF));
writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
- wait_for_completion(&mb1_transfer.work);
+ wait_for_completion(&mb1.work);
- if (mb1_transfer.ack.header != MB1H_PLL_ON_OFF)
+ if (mb1.ack.header != MB1H_PLL_ON_OFF)
r = -EIO;
- mutex_unlock(&mb1_transfer.lock);
+ mutex_unlock(&mb1.lock);
return r;
}
@@ -1303,7 +1007,7 @@ static int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state)
BUG_ON(epod_state == EPOD_STATE_RAMRET && !ram_retention);
/* get lock */
- mutex_lock(&mb2_transfer.lock);
+ mutex_lock(&mb2.lock);
/* wait for mailbox */
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(2))
@@ -1324,7 +1028,7 @@ static int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state)
* and we cannot recover if there is an error.
* This is expected to change when the firmware is updated.
*/
- if (!wait_for_completion_timeout(&mb2_transfer.work,
+ if (!wait_for_completion_timeout(&mb2.work,
msecs_to_jiffies(20000))) {
pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
__func__);
@@ -1332,11 +1036,11 @@ static int db8500_prcmu_set_epod(u16 epod_id, u8 epod_state)
goto unlock_and_return;
}
- if (mb2_transfer.ack.status != HWACC_PWR_ST_OK)
+ if (mb2.ack.status != HWACC_PWR_ST_OK)
r = -EIO;
unlock_and_return:
- mutex_unlock(&mb2_transfer.lock);
+ mutex_unlock(&mb2.lock);
return r;
}
@@ -1368,7 +1072,7 @@ static void db8500_prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
idle_cfg = ((idle_cfg << 4) | (idle->sva_policy & 0xF));
idle_cfg = ((idle_cfg << 4) | (idle->sia_policy & 0xF));
- spin_lock_irqsave(&mb2_transfer.auto_pm_lock, flags);
+ spin_lock_irqsave(&mb2.auto_pm_lock, flags);
/*
* The autonomous power management configuration is done through
@@ -1378,18 +1082,18 @@ static void db8500_prcmu_configure_auto_pm(struct prcmu_auto_pm_config *sleep,
writel(sleep_cfg, (tcdm_legacy_base + PRCM_REQ_MB2_AUTO_PM_SLEEP));
writel(idle_cfg, (tcdm_legacy_base + PRCM_REQ_MB2_AUTO_PM_IDLE));
- mb2_transfer.auto_pm_enabled =
+ mb2.auto_pm_enabled =
((sleep->sva_auto_pm_enable == PRCMU_AUTO_PM_ON) ||
(sleep->sia_auto_pm_enable == PRCMU_AUTO_PM_ON) ||
(idle->sva_auto_pm_enable == PRCMU_AUTO_PM_ON) ||
(idle->sia_auto_pm_enable == PRCMU_AUTO_PM_ON));
- spin_unlock_irqrestore(&mb2_transfer.auto_pm_lock, flags);
+ spin_unlock_irqrestore(&mb2.auto_pm_lock, flags);
}
bool prcmu_is_auto_pm_enabled(void)
{
- return mb2_transfer.auto_pm_enabled;
+ return mb2.auto_pm_enabled;
}
static int request_sysclk(bool enable)
@@ -1399,9 +1103,9 @@ static int request_sysclk(bool enable)
r = 0;
- mutex_lock(&mb3_transfer.sysclk_lock);
+ mutex_lock(&mb3.sysclk_lock);
- spin_lock_irqsave(&mb3_transfer.lock, flags);
+ spin_lock_irqsave(&mb3.lock, flags);
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(3))
cpu_relax();
@@ -1411,20 +1115,20 @@ static int request_sysclk(bool enable)
writeb(MB3H_SYSCLK, (tcdm_legacy_base + PRCM_MBOX_HEADER_REQ_MB3));
writel(MBOX_BIT(3), PRCM_MBOX_CPU_SET);
- spin_unlock_irqrestore(&mb3_transfer.lock, flags);
+ spin_unlock_irqrestore(&mb3.lock, flags);
/*
* The firmware only sends an ACK if we want to enable the
* SysClk, and it succeeds.
*/
- if (enable && !wait_for_completion_timeout(&mb3_transfer.sysclk_work,
+ if (enable && !wait_for_completion_timeout(&mb3.sysclk_work,
msecs_to_jiffies(20000))) {
pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
__func__);
r = -EIO;
}
- mutex_unlock(&mb3_transfer.sysclk_lock);
+ mutex_unlock(&mb3.sysclk_lock);
return r;
}
@@ -2007,7 +1711,7 @@ static int db8500_prcmu_config_esram0_deep_sleep(u8 state)
(state < ESRAM0_DEEP_SLEEP_STATE_OFF))
return -EINVAL;
- mutex_lock(&mb4_transfer.lock);
+ mutex_lock(&mb4.lock);
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
cpu_relax();
@@ -2020,16 +1724,16 @@ static int db8500_prcmu_config_esram0_deep_sleep(u8 state)
writeb(state, (tcdm_legacy_base + PRCM_REQ_MB4_ESRAM0_ST));
writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
- wait_for_completion(&mb4_transfer.work);
+ wait_for_completion(&mb4.work);
- mutex_unlock(&mb4_transfer.lock);
+ mutex_unlock(&mb4.lock);
return 0;
}
int db8500_prcmu_config_hotdog(u8 threshold)
{
- mutex_lock(&mb4_transfer.lock);
+ mutex_lock(&mb4.lock);
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
cpu_relax();
@@ -2038,16 +1742,16 @@ int db8500_prcmu_config_hotdog(u8 threshold)
writeb(MB4H_HOTDOG, (tcdm_legacy_base + PRCM_MBOX_HEADER_REQ_MB4));
writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
- wait_for_completion(&mb4_transfer.work);
+ wait_for_completion(&mb4.work);
- mutex_unlock(&mb4_transfer.lock);
+ mutex_unlock(&mb4.lock);
return 0;
}
int db8500_prcmu_config_hotmon(u8 low, u8 high)
{
- mutex_lock(&mb4_transfer.lock);
+ mutex_lock(&mb4.lock);
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
cpu_relax();
@@ -2059,16 +1763,16 @@ int db8500_prcmu_config_hotmon(u8 low, u8 high)
writeb(MB4H_HOTMON, (tcdm_legacy_base + PRCM_MBOX_HEADER_REQ_MB4));
writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
- wait_for_completion(&mb4_transfer.work);
+ wait_for_completion(&mb4.work);
- mutex_unlock(&mb4_transfer.lock);
+ mutex_unlock(&mb4.lock);
return 0;
}
static int config_hot_period(u16 val)
{
- mutex_lock(&mb4_transfer.lock);
+ mutex_lock(&mb4.lock);
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
cpu_relax();
@@ -2077,9 +1781,9 @@ static int config_hot_period(u16 val)
writeb(MB4H_HOT_PERIOD, (tcdm_legacy_base + PRCM_MBOX_HEADER_REQ_MB4));
writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
- wait_for_completion(&mb4_transfer.work);
+ wait_for_completion(&mb4.work);
- mutex_unlock(&mb4_transfer.lock);
+ mutex_unlock(&mb4.lock);
return 0;
}
@@ -2100,7 +1804,7 @@ int db8500_prcmu_stop_temp_sense(void)
static int prcmu_a9wdog(u8 cmd, u8 d0, u8 d1, u8 d2, u8 d3)
{
- mutex_lock(&mb4_transfer.lock);
+ mutex_lock(&mb4.lock);
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(4))
cpu_relax();
@@ -2113,9 +1817,9 @@ static int prcmu_a9wdog(u8 cmd, u8 d0, u8 d1, u8 d2, u8 d3)
writeb(cmd, (tcdm_legacy_base + PRCM_MBOX_HEADER_REQ_MB4));
writel(MBOX_BIT(4), PRCM_MBOX_CPU_SET);
- wait_for_completion(&mb4_transfer.work);
+ wait_for_completion(&mb4.work);
- mutex_unlock(&mb4_transfer.lock);
+ mutex_unlock(&mb4.lock);
return 0;
@@ -2178,7 +1882,7 @@ static int db8500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
if (size != 1)
return -EINVAL;
- mutex_lock(&mb5_transfer.lock);
+ mutex_lock(&mb5.lock);
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
cpu_relax();
@@ -2192,19 +1896,19 @@ static int db8500_prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
- if (!wait_for_completion_timeout(&mb5_transfer.work,
+ if (!wait_for_completion_timeout(&mb5.work,
msecs_to_jiffies(20000))) {
pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
__func__);
r = -EIO;
} else {
- r = ((mb5_transfer.ack.status == I2C_RD_OK) ? 0 : -EIO);
+ r = ((mb5.ack.status == I2C_RD_OK) ? 0 : -EIO);
}
if (!r)
- *value = mb5_transfer.ack.value;
+ *value = mb5.ack.value;
- mutex_unlock(&mb5_transfer.lock);
+ mutex_unlock(&mb5.lock);
return r;
}
@@ -2230,30 +1934,30 @@ static int db8500_prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask,
if (size != 1)
return -EINVAL;
- mutex_lock(&mb5_transfer.lock);
+ mutex_lock(&mb5.lock);
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(5))
cpu_relax();
writeb(~*mask, (tcdm_legacy_base + PRCM_MBOX_HEADER_REQ_MB5));
writeb(PRCMU_I2C_WRITE(slave),
- (tcdm_legacy_base + PRCM_REQ_MB5_I2C_SLAVE_OP));
+ tcdm_legacy_base + PRCM_REQ_MB5_I2C_SLAVE_OP);
writeb(PRCMU_I2C_STOP_EN, tcdm_legacy_base + PRCM_REQ_MB5_I2C_HW_BITS);
writeb(reg, (tcdm_legacy_base + PRCM_REQ_MB5_I2C_REG));
writeb(*value, (tcdm_legacy_base + PRCM_REQ_MB5_I2C_VAL));
writel(MBOX_BIT(5), PRCM_MBOX_CPU_SET);
- if (!wait_for_completion_timeout(&mb5_transfer.work,
+ if (!wait_for_completion_timeout(&mb5.work,
msecs_to_jiffies(20000))) {
pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
__func__);
r = -EIO;
} else {
- r = ((mb5_transfer.ack.status == I2C_WR_OK) ? 0 : -EIO);
+ r = ((mb5.ack.status == I2C_WR_OK) ? 0 : -EIO);
}
- mutex_unlock(&mb5_transfer.lock);
+ mutex_unlock(&mb5.lock);
return r;
}
@@ -2283,7 +1987,7 @@ int prcmu_ac_wake_req(void)
u32 val;
int ret = 0;
- mutex_lock(&mb0_transfer.ac_wake_lock);
+ mutex_lock(&mb0.ac_wake_lock);
val = readl(PRCM_HOSTACCESS_REQ);
if (val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ)
@@ -2304,7 +2008,7 @@ int prcmu_ac_wake_req(void)
val |= PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ;
writel(val, PRCM_HOSTACCESS_REQ);
- if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
+ if (!wait_for_completion_timeout(&mb0.ac_wake_work,
msecs_to_jiffies(5000))) {
#if defined(CONFIG_DBX500_PRCMU_DEBUG)
db8500_prcmu_debug_dump(__func__, true, true);
@@ -2315,7 +2019,7 @@ int prcmu_ac_wake_req(void)
}
unlock_and_return:
- mutex_unlock(&mb0_transfer.ac_wake_lock);
+ mutex_unlock(&mb0.ac_wake_lock);
return ret;
}
@@ -2326,7 +2030,7 @@ void prcmu_ac_sleep_req()
{
u32 val;
- mutex_lock(&mb0_transfer.ac_wake_lock);
+ mutex_lock(&mb0.ac_wake_lock);
val = readl(PRCM_HOSTACCESS_REQ);
if (!(val & PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ))
@@ -2335,7 +2039,7 @@ void prcmu_ac_sleep_req()
writel((val & ~PRCM_HOSTACCESS_REQ_HOSTACCESS_REQ),
PRCM_HOSTACCESS_REQ);
- if (!wait_for_completion_timeout(&mb0_transfer.ac_wake_work,
+ if (!wait_for_completion_timeout(&mb0.ac_wake_work,
msecs_to_jiffies(5000))) {
pr_crit("prcmu: %s timed out (5 s) waiting for a reply.\n",
__func__);
@@ -2344,7 +2048,7 @@ void prcmu_ac_sleep_req()
atomic_set(&ac_wake_req_state, 0);
unlock_and_return:
- mutex_unlock(&mb0_transfer.ac_wake_lock);
+ mutex_unlock(&mb0.ac_wake_lock);
}
static bool db8500_prcmu_is_ac_wake_requested(void)
@@ -2380,28 +2084,28 @@ static u16 db8500_prcmu_get_reset_code(void)
*/
static void db8500_prcmu_modem_reset(void)
{
- mutex_lock(&mb1_transfer.lock);
+ mutex_lock(&mb1.lock);
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(1))
cpu_relax();
writeb(MB1H_RESET_MODEM, (tcdm_legacy_base + PRCM_MBOX_HEADER_REQ_MB1));
writel(MBOX_BIT(1), PRCM_MBOX_CPU_SET);
- wait_for_completion(&mb1_transfer.work);
+ wait_for_completion(&mb1.work);
/*
* No need to check return from PRCMU as modem should go in reset state
* This state is already managed by upper layer
*/
- mutex_unlock(&mb1_transfer.lock);
+ mutex_unlock(&mb1.lock);
}
static void ack_dbb_wakeup(void)
{
unsigned long flags;
- spin_lock_irqsave(&mb0_transfer.lock, flags);
+ spin_lock_irqsave(&mb0.lock, flags);
while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(0))
cpu_relax();
@@ -2410,7 +2114,7 @@ static void ack_dbb_wakeup(void)
tcdm_legacy_base + PRCM_MBOX_HEADER_REQ_MB0);
writel(MBOX_BIT(0), PRCM_MBOX_CPU_SET);
- spin_unlock_irqrestore(&mb0_transfer.lock, flags);
+ spin_unlock_irqrestore(&mb0.lock, flags);
}
static inline void print_unknown_header_warning(u8 n, u8 header)
@@ -2438,11 +2142,11 @@ static bool read_mailbox_0(void)
PRCM_ACK_MB0_WAKEUP_0_8500);
if (ev & (WAKEUP_BIT_AC_WAKE_ACK | WAKEUP_BIT_AC_SLEEP_ACK))
- complete(&mb0_transfer.ac_wake_work);
+ complete(&mb0.ac_wake_work);
if (ev & WAKEUP_BIT_SYSCLK_OK)
- complete(&mb3_transfer.sysclk_work);
+ complete(&mb3.sysclk_work);
- ev &= mb0_transfer.req.dbb_irqs;
+ ev &= mb0.req.dbb_irqs;
for (n = 0; n < NUM_PRCMU_WAKEUPS; n++) {
if (ev & prcmu_irq_bit[n])
@@ -2461,25 +2165,25 @@ static bool read_mailbox_0(void)
static bool read_mailbox_1(void)
{
- mb1_transfer.ack.header = readb(tcdm_legacy_base +
+ mb1.ack.header = readb(tcdm_legacy_base +
PRCM_MBOX_HEADER_REQ_MB1);
- mb1_transfer.ack.arm_opp = readb(tcdm_legacy_base +
+ mb1.ack.arm_opp = readb(tcdm_legacy_base +
PRCM_ACK_MB1_CURRENT_ARM_OPP);
- mb1_transfer.ack.ape_opp = readb(tcdm_legacy_base +
+ mb1.ack.ape_opp = readb(tcdm_legacy_base +
PRCM_ACK_MB1_CURRENT_APE_OPP);
- mb1_transfer.ack.ape_voltage_status = readb(tcdm_legacy_base +
+ mb1.ack.ape_voltage_status = readb(tcdm_legacy_base +
PRCM_ACK_MB1_APE_VOLTAGE_STATUS);
writel(MBOX_BIT(1), PRCM_ARM_IT1_CLR);
- complete(&mb1_transfer.work);
+ complete(&mb1.work);
return false;
}
static bool read_mailbox_2(void)
{
- mb2_transfer.ack.status = readb(tcdm_legacy_base
+ mb2.ack.status = readb(tcdm_legacy_base
+ PRCM_ACK_MB2_DPS_STATUS);
writel(MBOX_BIT(2), PRCM_ARM_IT1_CLR);
- complete(&mb2_transfer.work);
+ complete(&mb2.work);
return false;
}
@@ -2515,18 +2219,18 @@ static bool read_mailbox_4(void)
writel(MBOX_BIT(4), PRCM_ARM_IT1_CLR);
if (do_complete)
- complete(&mb4_transfer.work);
+ complete(&mb4.work);
return false;
}
static bool read_mailbox_5(void)
{
- mb5_transfer.ack.status = readb(tcdm_legacy_base
+ mb5.ack.status = readb(tcdm_legacy_base
+ PRCM_ACK_MB5_I2C_STATUS);
- mb5_transfer.ack.value = readb(tcdm_legacy_base + PRCM_ACK_MB5_I2C_VAL);
+ mb5.ack.value = readb(tcdm_legacy_base + PRCM_ACK_MB5_I2C_VAL);
writel(MBOX_BIT(5), PRCM_ARM_IT1_CLR);
- complete(&mb5_transfer.work);
+ complete(&mb5.work);
return false;
}
@@ -2584,39 +2288,39 @@ static void prcmu_mask_work(struct work_struct *work)
{
unsigned long flags;
- spin_lock_irqsave(&mb0_transfer.lock, flags);
+ spin_lock_irqsave(&mb0.lock, flags);
config_wakeups();
- spin_unlock_irqrestore(&mb0_transfer.lock, flags);
+ spin_unlock_irqrestore(&mb0.lock, flags);
}
static void prcmu_irq_mask(struct irq_data *d)
{
unsigned long flags;
- spin_lock_irqsave(&mb0_transfer.dbb_irqs_lock, flags);
+ spin_lock_irqsave(&mb0.dbb_irqs_lock, flags);
- mb0_transfer.req.dbb_irqs &= ~prcmu_irq_bit[d->hwirq];
+ mb0.req.dbb_irqs &= ~prcmu_irq_bit[d->hwirq];
- spin_unlock_irqrestore(&mb0_transfer.dbb_irqs_lock, flags);
+ spin_unlock_irqrestore(&mb0.dbb_irqs_lock, flags);
if (d->irq != IRQ_PRCMU_CA_SLEEP)
- schedule_work(&mb0_transfer.mask_work);
+ schedule_work(&mb0.mask_work);
}
static void prcmu_irq_unmask(struct irq_data *d)
{
unsigned long flags;
- spin_lock_irqsave(&mb0_transfer.dbb_irqs_lock, flags);
+ spin_lock_irqsave(&mb0.dbb_irqs_lock, flags);
- mb0_transfer.req.dbb_irqs |= prcmu_irq_bit[d->hwirq];
+ mb0.req.dbb_irqs |= prcmu_irq_bit[d->hwirq];
- spin_unlock_irqrestore(&mb0_transfer.dbb_irqs_lock, flags);
+ spin_unlock_irqrestore(&mb0.dbb_irqs_lock, flags);
if (d->irq != IRQ_PRCMU_CA_SLEEP)
- schedule_work(&mb0_transfer.mask_work);
+ schedule_work(&mb0.mask_work);
}
static void noop(struct irq_data *d)
@@ -2898,25 +2602,25 @@ struct prcmu_fops_register_data *__init
tcdm_base = ioremap_nocache(U8500_PRCMU_TCDM_BASE, map->tcdm_size);
tcdm_legacy_base = tcdm_base + map->legacy_offset;
- spin_lock_init(&mb0_transfer.lock);
- spin_lock_init(&mb0_transfer.dbb_irqs_lock);
- mutex_init(&mb0_transfer.ac_wake_lock);
- init_completion(&mb0_transfer.ac_wake_work);
- mutex_init(&mb1_transfer.lock);
- init_completion(&mb1_transfer.work);
- mb1_transfer.ape_opp = APE_NO_CHANGE;
- mutex_init(&mb2_transfer.lock);
- init_completion(&mb2_transfer.work);
- spin_lock_init(&mb2_transfer.auto_pm_lock);
- spin_lock_init(&mb3_transfer.lock);
- mutex_init(&mb3_transfer.sysclk_lock);
- init_completion(&mb3_transfer.sysclk_work);
- mutex_init(&mb4_transfer.lock);
- init_completion(&mb4_transfer.work);
- mutex_init(&mb5_transfer.lock);
- init_completion(&mb5_transfer.work);
-
- INIT_WORK(&mb0_transfer.mask_work, prcmu_mask_work);
+ spin_lock_init(&mb0.lock);
+ spin_lock_init(&mb0.dbb_irqs_lock);
+ mutex_init(&mb0.ac_wake_lock);
+ init_completion(&mb0.ac_wake_work);
+ mutex_init(&mb1.lock);
+ init_completion(&mb1.work);
+ mb1.ape_opp = APE_NO_CHANGE;
+ mutex_init(&mb2.lock);
+ init_completion(&mb2.work);
+ spin_lock_init(&mb2.auto_pm_lock);
+ spin_lock_init(&mb3.lock);
+ mutex_init(&mb3.sysclk_lock);
+ init_completion(&mb3.sysclk_work);
+ mutex_init(&mb4.lock);
+ init_completion(&mb4.work);
+ mutex_init(&mb5.lock);
+ init_completion(&mb5.work);
+
+ INIT_WORK(&mb0.mask_work, prcmu_mask_work);
/* early init of dbx500-prcmu */
return &db8500_early_data;
diff --git a/drivers/mfd/dbx500-prcmu.h b/drivers/mfd/dbx500-prcmu.h
new file mode 100644
index 0000000..79cba24
--- /dev/null
+++ b/drivers/mfd/dbx500-prcmu.h
@@ -0,0 +1,378 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * Author: Loic Pallardy <loic.pallardy@xxxxxxxxxxxxxx>
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * PRCMU legacy mailbox definition
+ */
+
+#define KHZ_TO_HZ(A) (A*1000)
+#define HZ_TO_KHZ(A) (A/1000)
+
+/* Offset for the firmware version within the TCPM */
+#define PRCMU_FW_VERSION_OFFSET 0xA4
+
+#define PRCM_BOOT_STATUS 0xFFF
+
+#define PRCM_SW_RST_REASON 0xFF8 /* 2 bytes */
+
+#define PRCM_TCDM_VOICE_CALL_FLAG 0xDD4 /* 4 bytes */
+
+#define _PRCM_MBOX_HEADER 0xFE8 /* 16 bytes */
+#define PRCM_MBOX_HEADER_REQ_MB0 (_PRCM_MBOX_HEADER + 0x0)
+#define PRCM_MBOX_HEADER_REQ_MB1 (_PRCM_MBOX_HEADER + 0x1)
+#define PRCM_MBOX_HEADER_REQ_MB2 (_PRCM_MBOX_HEADER + 0x2)
+#define PRCM_MBOX_HEADER_REQ_MB3 (_PRCM_MBOX_HEADER + 0x3)
+#define PRCM_MBOX_HEADER_REQ_MB4 (_PRCM_MBOX_HEADER + 0x4)
+#define PRCM_MBOX_HEADER_REQ_MB5 (_PRCM_MBOX_HEADER + 0x5)
+#define PRCM_MBOX_HEADER_ACK_MB0 (_PRCM_MBOX_HEADER + 0x8)
+
+/* Req Mailboxes */
+#define PRCM_REQ_MB0 0xFDC /* 12 bytes */
+#define PRCM_REQ_MB1 0xFD0 /* 12 bytes */
+#define PRCM_REQ_MB2 0xFC0 /* 16 bytes */
+#define PRCM_REQ_MB3 0xE4C /* 372 bytes */
+#define PRCM_REQ_MB4 0xE48 /* 4 bytes */
+#define PRCM_REQ_MB5 0xE44 /* 4 bytes */
+#define PRCM_REQ_PASR 0xE04 /* 4 bytes */
+
+/* Ack Mailboxes */
+#define PRCM_ACK_MB0 0xE08 /* 52 bytes */
+#define PRCM_ACK_MB1 0xE04 /* 4 bytes */
+#define PRCM_ACK_MB2 0xE00 /* 4 bytes */
+#define PRCM_ACK_MB3 0xDFC /* 4 bytes */
+#define PRCM_ACK_MB4 0xDF8 /* 4 bytes */
+#define PRCM_ACK_MB5 0xDF4 /* 4 bytes */
+
+/* Mailbox 0 headers */
+#define MB0H_POWER_STATE_TRANS 0
+#define MB0H_CONFIG_WAKEUPS_EXE 1
+#define MB0H_READ_WAKEUP_ACK 3
+#define MB0H_CONFIG_WAKEUPS_SLEEP 4
+#define MB0H_CONFIG_PASR_DDR0_CS0 6
+#define MB0H_CONFIG_PASR_DDR0_CS1 7
+#define MB0H_CONFIG_PASR_DDR1_CS0 8
+#define MB0H_CONFIG_PASR_DDR1_CS1 9
+
+#define MB0H_WAKEUP_EXE 2
+#define MB0H_WAKEUP_SLEEP 5
+
+/* Mailbox 0 REQs */
+#define PRCM_REQ_MB0_AP_POWER_STATE (PRCM_REQ_MB0 + 0x0)
+#define PRCM_REQ_MB0_AP_PLL_STATE (PRCM_REQ_MB0 + 0x1)
+#define PRCM_REQ_MB0_ULP_CLOCK_STATE (PRCM_REQ_MB0 + 0x2)
+#define PRCM_REQ_MB0_DO_NOT_WFI (PRCM_REQ_MB0 + 0x3)
+#define PRCM_REQ_MB0_WAKEUP_8500 (PRCM_REQ_MB0 + 0x4)
+#define PRCM_REQ_MB0_WAKEUP_4500 (PRCM_REQ_MB0 + 0x8)
+
+/* Mailbox 0 PASR REQs */
+#define PRCM_REQ_MB0_PASR_MR16 (PRCM_REQ_PASR + 0x0)
+#define PRCM_REQ_MB0_PASR_MR17 (PRCM_REQ_PASR + 0x2)
+
+/* Mailbox 0 ACKs */
+#define PRCM_ACK_MB0_AP_PWRSTTR_STATUS (PRCM_ACK_MB0 + 0x0)
+#define PRCM_ACK_MB0_READ_POINTER (PRCM_ACK_MB0 + 0x1)
+#define PRCM_ACK_MB0_WAKEUP_0_8500 (PRCM_ACK_MB0 + 0x4)
+#define PRCM_ACK_MB0_WAKEUP_0_4500 (PRCM_ACK_MB0 + 0x8)
+#define PRCM_ACK_MB0_WAKEUP_1_8500 (PRCM_ACK_MB0 + 0x1C)
+#define PRCM_ACK_MB0_WAKEUP_1_4500 (PRCM_ACK_MB0 + 0x20)
+#define PRCM_ACK_MB0_EVENT_4500_NUMBERS 20
+
+/* Mailbox 1 headers */
+#define MB1H_ARM_APE_OPP 0x0
+#define MB1H_RESET_MODEM 0x2
+#define MB1H_REQUEST_APE_OPP_100_VOLT 0x3
+#define MB1H_RELEASE_APE_OPP_100_VOLT 0x4
+#define MB1H_RELEASE_USB_WAKEUP 0x5
+#define MB1H_PLL_ON_OFF 0x6
+
+/* Mailbox 1 Requests */
+#define PRCM_REQ_MB1_ARM_OPP (PRCM_REQ_MB1 + 0x0)
+#define PRCM_REQ_MB1_APE_OPP (PRCM_REQ_MB1 + 0x1)
+#define PRCM_REQ_MB1_PLL_ON_OFF (PRCM_REQ_MB1 + 0x4)
+#define PLL_SOC0_OFF 0x1
+#define PLL_SOC0_ON 0x2
+#define PLL_SOC1_OFF 0x4
+#define PLL_SOC1_ON 0x8
+
+/* Mailbox 1 ACKs */
+#define PRCM_ACK_MB1_CURRENT_ARM_OPP (PRCM_ACK_MB1 + 0x0)
+#define PRCM_ACK_MB1_CURRENT_APE_OPP (PRCM_ACK_MB1 + 0x1)
+#define PRCM_ACK_MB1_APE_VOLTAGE_STATUS (PRCM_ACK_MB1 + 0x2)
+#define PRCM_ACK_MB1_DVFS_STATUS (PRCM_ACK_MB1 + 0x3)
+
+/* Mailbox 2 headers */
+#define MB2H_DPS 0x0
+#define MB2H_AUTO_PWR 0x1
+
+/* Mailbox 2 REQs */
+#define PRCM_REQ_MB2_SVA_MMDSP (PRCM_REQ_MB2 + 0x0)
+#define PRCM_REQ_MB2_SVA_PIPE (PRCM_REQ_MB2 + 0x1)
+#define PRCM_REQ_MB2_SIA_MMDSP (PRCM_REQ_MB2 + 0x2)
+#define PRCM_REQ_MB2_SIA_PIPE (PRCM_REQ_MB2 + 0x3)
+#define PRCM_REQ_MB2_SGA (PRCM_REQ_MB2 + 0x4)
+#define PRCM_REQ_MB2_B2R2_MCDE (PRCM_REQ_MB2 + 0x5)
+#define PRCM_REQ_MB2_ESRAM12 (PRCM_REQ_MB2 + 0x6)
+#define PRCM_REQ_MB2_ESRAM34 (PRCM_REQ_MB2 + 0x7)
+#define PRCM_REQ_MB2_AUTO_PM_SLEEP (PRCM_REQ_MB2 + 0x8)
+#define PRCM_REQ_MB2_AUTO_PM_IDLE (PRCM_REQ_MB2 + 0xC)
+
+/* Mailbox 2 ACKs */
+#define PRCM_ACK_MB2_DPS_STATUS (PRCM_ACK_MB2 + 0x0)
+#define HWACC_PWR_ST_OK 0xFE
+
+/* Mailbox 3 headers */
+#define MB3H_ANC 0x0
+#define MB3H_SIDETONE 0x1
+#define MB3H_SYSCLK 0xE
+
+/* Mailbox 3 Requests */
+#define PRCM_REQ_MB3_ANC_FIR_COEFF (PRCM_REQ_MB3 + 0x0)
+#define PRCM_REQ_MB3_ANC_IIR_COEFF (PRCM_REQ_MB3 + 0x20)
+#define PRCM_REQ_MB3_ANC_SHIFTER (PRCM_REQ_MB3 + 0x60)
+#define PRCM_REQ_MB3_ANC_WARP (PRCM_REQ_MB3 + 0x64)
+#define PRCM_REQ_MB3_SIDETONE_FIR_GAIN (PRCM_REQ_MB3 + 0x68)
+#define PRCM_REQ_MB3_SIDETONE_FIR_COEFF (PRCM_REQ_MB3 + 0x6C)
+#define PRCM_REQ_MB3_SYSCLK_MGT (PRCM_REQ_MB3 + 0x16C)
+
+/* Mailbox 3 ACKs */
+#define PRCM_ACK_MB3_TRACE_MSG (PRCM_ACK_MB3 + 0x00)
+#define PRCM_ACK_MB3_LOG_REQ (PRCM_ACK_MB3 + 0x01)
+#define MB3_LOG_REQ_PRCMU_REGS (1 << 0)
+#define MB3_LOG_REQ_TCDM (1 << 1)
+#define MB3_LOG_REQ_AB_REGS (1 << 2)
+
+/* Mailbox 4 headers */
+#define MB4H_DDR_INIT 0x0
+#define MB4H_MEM_ST 0x1
+#define MB4H_HOTDOG 0x12
+#define MB4H_HOTMON 0x13
+#define MB4H_HOT_PERIOD 0x14
+#define MB4H_A9WDOG_CONF 0x16
+#define MB4H_A9WDOG_EN 0x17
+#define MB4H_A9WDOG_DIS 0x18
+#define MB4H_A9WDOG_LOAD 0x19
+#define MB4H_A9WDOG_KICK 0x20
+
+/* Mailbox 4 Requests */
+#define PRCM_REQ_MB4_DDR_ST_AP_SLEEP_IDLE (PRCM_REQ_MB4 + 0x0)
+#define PRCM_REQ_MB4_DDR_ST_AP_DEEP_IDLE (PRCM_REQ_MB4 + 0x1)
+#define PRCM_REQ_MB4_ESRAM0_ST (PRCM_REQ_MB4 + 0x3)
+#define PRCM_REQ_MB4_HOTDOG_THRESHOLD (PRCM_REQ_MB4 + 0x0)
+#define PRCM_REQ_MB4_HOTMON_LOW (PRCM_REQ_MB4 + 0x0)
+#define PRCM_REQ_MB4_HOTMON_HIGH (PRCM_REQ_MB4 + 0x1)
+#define PRCM_REQ_MB4_HOTMON_CONFIG (PRCM_REQ_MB4 + 0x2)
+#define PRCM_REQ_MB4_HOT_PERIOD (PRCM_REQ_MB4 + 0x0)
+#define HOTMON_CONFIG_LOW BIT(0)
+#define HOTMON_CONFIG_HIGH BIT(1)
+#define PRCM_REQ_MB4_A9WDOG_0 (PRCM_REQ_MB4 + 0x0)
+#define PRCM_REQ_MB4_A9WDOG_1 (PRCM_REQ_MB4 + 0x1)
+#define PRCM_REQ_MB4_A9WDOG_2 (PRCM_REQ_MB4 + 0x2)
+#define PRCM_REQ_MB4_A9WDOG_3 (PRCM_REQ_MB4 + 0x3)
+#define A9WDOG_AUTO_OFF_EN BIT(7)
+#define A9WDOG_AUTO_OFF_DIS 0
+#define A9WDOG_ID_MASK 0xf
+
+#define MB4TIM (HZ/10)
+
+/* Mailbox 5 Requests */
+#define PRCM_REQ_MB5_I2C_SLAVE_OP (PRCM_REQ_MB5 + 0x0)
+#define PRCM_REQ_MB5_I2C_HW_BITS (PRCM_REQ_MB5 + 0x1)
+#define PRCM_REQ_MB5_I2C_REG (PRCM_REQ_MB5 + 0x2)
+#define PRCM_REQ_MB5_I2C_VAL (PRCM_REQ_MB5 + 0x3)
+#define PRCMU_I2C_WRITE(slave) (((slave) << 1) | BIT(6))
+#define PRCMU_I2C_READ(slave) (((slave) << 1) | BIT(0) | BIT(6))
+#define PRCMU_I2C_STOP_EN BIT(3)
+
+/* Mailbox 5 ACKs */
+#define PRCM_ACK_MB5_I2C_STATUS (PRCM_ACK_MB5 + 0x1)
+#define PRCM_ACK_MB5_I2C_VAL (PRCM_ACK_MB5 + 0x3)
+#define I2C_WR_OK 0x1
+#define I2C_RD_OK 0x2
+
+#define NUM_MB 8
+#define MBOX_BIT BIT
+#define ALL_MBOX_BITS (MBOX_BIT(NUM_MB) - 1)
+
+/*
+ * Wakeups/IRQs
+ */
+
+#define WAKEUP_BIT_RTC BIT(0)
+#define WAKEUP_BIT_RTT0 BIT(1)
+#define WAKEUP_BIT_RTT1 BIT(2)
+#define WAKEUP_BIT_HSI0 BIT(3)
+#define WAKEUP_BIT_HSI1 BIT(4)
+#define WAKEUP_BIT_CA_WAKE BIT(5)
+#define WAKEUP_BIT_USB BIT(6)
+#define WAKEUP_BIT_ABB BIT(7)
+#define WAKEUP_BIT_ABB_FIFO BIT(8)
+#define WAKEUP_BIT_SYSCLK_OK BIT(9)
+#define WAKEUP_BIT_CA_SLEEP BIT(10)
+#define WAKEUP_BIT_AC_WAKE_ACK BIT(11)
+#define WAKEUP_BIT_SIDE_TONE_OK BIT(12)
+#define WAKEUP_BIT_ANC_OK BIT(13)
+#define WAKEUP_BIT_SW_ERROR BIT(14)
+#define WAKEUP_BIT_AC_SLEEP_ACK BIT(15)
+#define WAKEUP_BIT_ARM BIT(17)
+#define WAKEUP_BIT_HOTMON_LOW BIT(18)
+#define WAKEUP_BIT_HOTMON_HIGH BIT(19)
+#define WAKEUP_BIT_MODEM_SW_RESET_REQ BIT(20)
+#define WAKEUP_BIT_GPIO0 BIT(23)
+#define WAKEUP_BIT_GPIO1 BIT(24)
+#define WAKEUP_BIT_GPIO2 BIT(25)
+#define WAKEUP_BIT_GPIO3 BIT(26)
+#define WAKEUP_BIT_GPIO4 BIT(27)
+#define WAKEUP_BIT_GPIO5 BIT(28)
+#define WAKEUP_BIT_GPIO6 BIT(29)
+#define WAKEUP_BIT_GPIO7 BIT(30)
+#define WAKEUP_BIT_GPIO8 BIT(31)
+
+/*
+* Used by MCDE to setup all necessary PRCMU registers
+*/
+#define PRCMU_RESET_DSIPLL 0x00004000
+#define PRCMU_UNCLAMP_DSIPLL 0x00400800
+
+#define PRCMU_CLK_PLL_DIV_SHIFT 0
+#define PRCMU_CLK_PLL_SW_SHIFT 5
+#define PRCMU_CLK_38 (1 << 9)
+#define PRCMU_CLK_38_SRC (1 << 10)
+#define PRCMU_CLK_38_DIV (1 << 11)
+
+/* PLLDIV=12, PLLSW=4 (PLLDDR) */
+#define PRCMU_DSI_CLOCK_SETTING 0x0000008C
+
+/* DPI 50000000 Hz */
+#define PRCMU_DPI_CLOCK_SETTING ((1 << PRCMU_CLK_PLL_SW_SHIFT) | \
+ (16 << PRCMU_CLK_PLL_DIV_SHIFT))
+#define PRCMU_DSI_LP_CLOCK_SETTING 0x00000E00
+
+/* D=101, N=1, R=4, SELDIV2=0 */
+#define PRCMU_PLLDSI_FREQ_SETTING 0x00040165
+
+#define PRCMU_ENABLE_PLLDSI 0x00000001
+#define PRCMU_DISABLE_PLLDSI 0x00000000
+#define PRCMU_RELEASE_RESET_DSS 0x0000400C
+#define PRCMU_DSI_PLLOUT_SEL_SETTING 0x00000202
+/* ESC clk, div0=1, div1=1, div2=3 */
+#define PRCMU_ENABLE_ESCAPE_CLOCK_DIV 0x07030101
+#define PRCMU_DISABLE_ESCAPE_CLOCK_DIV 0x00030101
+#define PRCMU_DSI_RESET_SW 0x00000007
+
+#define PRCMU_PLLDSI_LOCKP_LOCKED 0x3
+
+struct clk_mgt {
+ void __iomem *reg;
+ u32 pllsw;
+ int branch;
+ bool clk38div;
+};
+
+enum {
+ PLL_RAW,
+ PLL_FIX,
+ PLL_DIV
+};
+
+/*
+ * mb0_transfer - state needed for mailbox 0 communication.
+ * @lock: The transaction lock.
+ * @dbb_events_lock: A lock used to handle concurrent access to (parts of)
+ * the request data.
+ * @mask_work: Work structure used for (un)masking wakeup interrupts.
+ * @req: Request data that need to persist between requests.
+ */
+struct mb0_transfer {
+ spinlock_t lock;
+ spinlock_t dbb_irqs_lock;
+ struct work_struct mask_work;
+ struct mutex ac_wake_lock;
+ struct completion ac_wake_work;
+ struct {
+ u32 dbb_irqs;
+ u32 dbb_wakeups;
+ u32 abb_events;
+ } req;
+};
+
+/*
+ * mb1_transfer - state needed for mailbox 1 communication.
+ * @lock: The transaction lock.
+ * @work: The transaction completion structure.
+ * @ape_opp: The current APE OPP.
+ * @ack: Reply ("acknowledge") data.
+ */
+struct mb1_transfer {
+ struct mutex lock;
+ struct completion work;
+ u8 ape_opp;
+ struct {
+ u8 header;
+ u8 arm_opp;
+ u8 ape_opp;
+ u8 ape_voltage_status;
+ } ack;
+};
+
+/*
+ * mb2_transfer - state needed for mailbox 2 communication.
+ * @lock: The transaction lock.
+ * @work: The transaction completion structure.
+ * @auto_pm_lock: The autonomous power management configuration lock.
+ * @auto_pm_enabled: A flag indicating whether autonomous PM is enabled.
+ * @req: Request data that need to persist between requests.
+ * @ack: Reply ("acknowledge") data.
+ */
+struct mb2_transfer {
+ struct mutex lock;
+ struct completion work;
+ spinlock_t auto_pm_lock;
+ bool auto_pm_enabled;
+ struct {
+ u8 status;
+ } ack;
+};
+
+/*
+ * mb3_transfer - state needed for mailbox 3 communication.
+ * @lock: The request lock.
+ * @sysclk_lock: A lock used to handle concurrent sysclk requests.
+ * @sysclk_work: Work structure used for sysclk requests.
+ */
+struct mb3_transfer {
+ spinlock_t lock;
+ struct mutex sysclk_lock;
+ struct completion sysclk_work;
+ spinlock_t fw_log_lock;
+ struct work_struct fw_log_work;
+ u8 fw_log_req;
+};
+
+/*
+ * mb4_transfer - state needed for mailbox 4 communication.
+ * @lock: The transaction lock.
+ * @work: The transaction completion structure.
+ */
+struct mb4_transfer {
+ struct mutex lock;
+ struct completion work;
+};
+
+/*
+ * mb5_transfer - state needed for mailbox 5 communication.
+ * @lock: The transaction lock.
+ * @work: The transaction completion structure.
+ * @ack: Reply ("acknowledge") data.
+ */
+struct mb5_transfer {
+ struct mutex lock;
+ struct completion work;
+ struct {
+ u8 status;
+ u8 value;
+ } ack;
+};
+
--
1.7.11.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/