[PATCH 15/17] mfd: dbx540-prcmu creation
From: Loic Pallardy
Date: Wed Sep 05 2012 - 06:01:27 EST
This driver offers support for ST-Ericsson DB9540 and
DB8540 PRCMU.
- add new communication interface named UniqPAP
- add support for x540 HW
Signed-off-by: Loic Pallardy <loic.pallardy@xxxxxxxxxxxxxx>
Acked-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
drivers/mfd/Kconfig | 11 +
drivers/mfd/Makefile | 1 +
drivers/mfd/dbx500-prcmu-regs.h | 1 +
drivers/mfd/dbx540-prcmu-regs.h | 106 ++
drivers/mfd/dbx540-prcmu.c | 2807 ++++++++++++++++++++++++++++++++++++++
include/linux/mfd/db8500-prcmu.h | 6 +-
include/linux/mfd/dbx500-prcmu.h | 24 +
include/linux/mfd/dbx540-prcmu.h | 96 ++
8 files changed, 3049 insertions(+), 3 deletions(-)
create mode 100644 drivers/mfd/dbx540-prcmu-regs.h
create mode 100644 drivers/mfd/dbx540-prcmu.c
create mode 100644 include/linux/mfd/dbx540-prcmu.h
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 3420844..bb8444c 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -821,6 +821,17 @@ config MFD_DB8500_PRCMU
system controller running an XP70 microprocessor, which is accessed
through a register map.
+config MFD_DBX540_PRCMU
+ bool "ST-Ericsson DB9540/DB8540 Power Reset Control Management Unit"
+ depends on UX500_SOC_DB8500
+ select MFD_CORE
+ select MFD_DB8500_PRCMU
+ help
+ Select this option to enable support for the DB9540/DB8540 Power Reset
+ and Control Management Unit. This is basically an autonomous
+ system controller running an XP70 microprocessor, which is accessed
+ through a register map.
+
config MFD_CS5535
tristate "Support for CS5535 and CS5536 southbridge core functions"
select MFD_CORE
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 42d703a..8715743 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -108,6 +108,7 @@ obj-$(CONFIG_AB8500_DEBUG) += ab8500-debugfs.o
obj-$(CONFIG_AB8500_GPADC) += ab8500-gpadc.o
obj-$(CONFIG_DBX500_PRCMU) += dbx500-prcmu.o
obj-$(CONFIG_MFD_DB8500_PRCMU) += db8500-prcmu.o
+obj-$(CONFIG_MFD_DBX540_PRCMU) += dbx540-prcmu.o
# ab8500-core need to come after db8500-prcmu (which provides the channel)
obj-$(CONFIG_AB8500_CORE) += ab8500-core.o ab8500-sysctrl.o
obj-$(CONFIG_MFD_TIMBERDALE) += timberdale.o
diff --git a/drivers/mfd/dbx500-prcmu-regs.h b/drivers/mfd/dbx500-prcmu-regs.h
index 23108a6..888baf6 100644
--- a/drivers/mfd/dbx500-prcmu-regs.h
+++ b/drivers/mfd/dbx500-prcmu-regs.h
@@ -83,6 +83,7 @@
#define PRCM_ARM_WFI_STANDBY_WFI1 0x10
#define PRCM_IOCR (_PRCMU_BASE + 0x310)
#define PRCM_IOCR_IOFORCE 0x1
+#define PRCM_IOCR_TDO_PULLUP_ENABLE 0x2
/* CPU mailbox registers */
#define PRCM_MBOX_CPU_VAL (_PRCMU_BASE + 0x0fc)
diff --git a/drivers/mfd/dbx540-prcmu-regs.h b/drivers/mfd/dbx540-prcmu-regs.h
new file mode 100644
index 0000000..a15810d
--- /dev/null
+++ b/drivers/mfd/dbx540-prcmu-regs.h
@@ -0,0 +1,106 @@
+/*
+ * Copyright (C) STMicroelectronics 2012
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * Author: michel jaouen <michel.jaouen@xxxxxxxxxxxxxx>
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * PRCM Unit registers
+ */
+
+#ifndef __DBX540_PRCMU_REGS_H
+#define __DBX540_PRCMU_REGS_H
+
+#include "dbx500-prcmu-regs.h"
+
+#define PRCM_SPARE1CLK_MGT PRCM_CLK_MGT(0x048)
+#define PRCM_C2CCLK_MGT PRCM_CLK_MGT(0x108)
+#define PRCM_G1CLK_MGT PRCM_CLK_MGT(0x548)
+#define PRCM_HVACLK_MGT PRCM_CLK_MGT(0x54C)
+
+
+#define PRCM_POWER_STATE_VAL_VAPE_STATE_OPP_MASK BITS(1, 3)
+#define PRCM_POWER_STATE_VAL_VAPE_STATE_OPP_SHIFT 1
+#define PRCM_POWER_STATE_VAL_VARM_STATE_OPP_MASK BITS(28, 30)
+#define PRCM_POWER_STATE_VAL_VARM_STATE_OPP_SHIFT 28
+
+#define PRCM_PLLDSITV_FREQ (_PRCMU_BASE + 0x500)
+#define PRCM_PLLDSITV_ENABLE (_PRCMU_BASE + 0x504)
+#define PRCM_PLLDSITV_LOCKP (_PRCMU_BASE + 0x508)
+#define PRCM_PLLDSILCD_FREQ (_PRCMU_BASE + 0x290)
+#define PRCM_PLLDSILCD_ENABLE (_PRCMU_BASE + 0x294)
+#define PRCM_PLLDSILCD_LOCKP (_PRCMU_BASE + 0x298)
+
+#define PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_SHIFT 0
+#define U8500_PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_MASK BITS(0, 2)
+#define U9540_PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_MASK BITS(0, 3)
+#define PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_SHIFT 8
+#define U8500_PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_MASK BITS(8, 10)
+#define U9540_PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_MASK BITS(8, 11)
+
+
+#define PRCM_APE_RESETN_DSIPLL_TV_RESETN BIT(14)
+#define PRCM_APE_RESETN_DSIPLL_LCD_RESETN BIT(15)
+
+
+#define PRCM_EPOD_C_CLR (_PRCMU_BASE + 0x414)
+#define PRCM_EPOD_C_VAL (_PRCMU_BASE + 0x418)
+#define PRCM_EPOD_VOK (_PRCMU_BASE + 0x41C)
+
+#define PRCM_DDR1_SUBSYS_APE_MINBW (_PRCMU_BASE + 0x2438)
+
+
+/* C2C related PRCM register */
+#define PRCM_C2C_RESETN_SET (_PRCMU_BASE + 0x2B0)
+#define PRCM_C2C_RESETN_CLR (_PRCMU_BASE + 0x2B4)
+#define PRCM_C2C_RESETN_VAL (_PRCMU_BASE + 0x2B8)
+
+#define PRCM_C2C_RESETN_C2C_WRAPPER_PER BIT(0)
+#define PRCM_C2C_RESETN_C2C_CORE BIT(1)
+#define PRCM_C2C_RESETN_HVA_LOGIC BIT(2)
+#define PRCM_C2C_RESETN_HVA_MEM BIT(3)
+#define PRCM_C2C_RESETN_G1_LOGIC BIT(4)
+#define PRCM_C2C_RESETN_G1_MEM BIT(5)
+
+#define PRCM_C2C_CTL_SET (_PRCMU_BASE + 0x4F4)
+#define PRCM_C2C_CTL_CLR (_PRCMU_BASE + 0x4F8)
+#define PRCM_C2C_CTL_VAL (_PRCMU_BASE + 0x4FC)
+
+#define PRCM_C2CSUBSYS_STATUS (_PRCMU_BASE + 0x2024)
+#define PRCM_C2CSUBSYS_CONTROL_SET (_PRCMU_BASE + 0x2048)
+#define PRCM_C2CSUBSYS_CONTROL_CLR (_PRCMU_BASE + 0x204C)
+#define PRCM_C2CSUBSYS_CONTROL_VAL (_PRCMU_BASE + 0x2050)
+#define PRCM_C2C_SSCM_GENI_SET (_PRCMU_BASE + 0x2054)
+#define PRCM_C2C_SSCM_GENI_CLR (_PRCMU_BASE + 0x2058)
+#define PRCM_C2C_SSCM_GENI_VAL (_PRCMU_BASE + 0x205C)
+#define PRCM_C2C_SSCM_GENO (_PRCMU_BASE + 0x2060)
+#define PRCM_C2C_COMPCR (_PRCMU_BASE + 0x2064)
+#define PRCM_C2C_COMPSTA (_PRCMU_BASE + 0x2068)
+#define PRCM_C2C_IO_CTL_SET (_PRCMU_BASE + 0x202C)
+#define PRCM_C2C_IO_CTL_CLR (_PRCMU_BASE + 0x2030)
+#define PRCM_C2C_IO_CTL_VAL (_PRCMU_BASE + 0x2034)
+#define PRCM_A9_C2C_GENO_MASK_SET (_PRCMU_BASE + 0x2078)
+#define PRCM_A9_C2C_GENO_MASK_CLR (_PRCMU_BASE + 0x207C)
+#define PRCM_A9_C2C_GENO_MASK_VAL (_PRCMU_BASE + 0x2080)
+#define PRCM_C2C_MEM_REQ (_PRCMU_BASE + 0x2038)
+#define PRCM_C2C_MEM_ACK (_PRCMU_BASE + 0x203C)
+#define PRCM_C2C_MEM_LAT (_PRCMU_BASE + 0x2040)
+#define PRCM_C2C_MEM_MIN_BW (_PRCMU_BASE + 0x2044)
+#define PRCM_ITSTATUS7 (_PRCMU_BASE + 0x24B8)
+#define PRCM_ITCLR7 (_PRCMU_BASE + 0x24BC)
+#define PRCM_LINE_VALUE7 (_PRCMU_BASE + 0x24C0)
+#define PRCM_HOLD_EVT7 (_PRCMU_BASE + 0x24C4)
+#define PRCM_EDGE_SENS_L7 (_PRCMU_BASE + 0x24C8)
+#define PRCM_EDGE_SENS_H7 (_PRCMU_BASE + 0x24CC)
+#define PRCM_ITSTATUS8 (_PRCMU_BASE + 0x24D0)
+#define PRCM_ITCLR8 (_PRCMU_BASE + 0x24D4)
+#define PRCM_LINE_VALUE8 (_PRCMU_BASE + 0x24D8)
+#define PRCM_HOLD_EVT8 (_PRCMU_BASE + 0x24DC)
+#define PRCM_EDGE_SENS_L8 (_PRCMU_BASE + 0x24E0)
+#define PRCM_EDGE_SENS_H8 (_PRCMU_BASE + 0x24E4)
+
+#define PRCM_SPARE_OUT (_PRCMU_BASE + 0x2070)
+#define PRCM_SPARE_OUT_PSW_SDMMC BIT(1)
+
+#endif /* __DBX540_PRCMU_REGS_H */
diff --git a/drivers/mfd/dbx540-prcmu.c b/drivers/mfd/dbx540-prcmu.c
new file mode 100644
index 0000000..374ba6c
--- /dev/null
+++ b/drivers/mfd/dbx540-prcmu.c
@@ -0,0 +1,2807 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2012
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Michel Jaouen <michel.jaouen@xxxxxxxxxxxxxx>
+ * Author: Alexandre Torgue <alexandre.torgues@xxxxxxxxxxxxxx>
+ * Author: David Paris <david.paris@xxxxxxxxxxxxxx>
+ * Author: Etienne Carriere <etienne.carriere@xxxxxxxxxxxxxx>
+ * Author: Guillaume KOUADIO CARRY <guillaume.kouadio-carry@xxxxxxxxxxxxxx>
+ * DBX540 PRCM Unit interface driver
+ *
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/mutex.h>
+#include <linux/completion.h>
+#include <linux/irq.h>
+#include <linux/jiffies.h>
+#include <linux/bitops.h>
+#include <linux/fs.h>
+#include <linux/cpufreq.h>
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+#include <linux/of.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/dbx500-prcmu.h>
+#include <linux/regulator/db8500-prcmu.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/abx500.h>
+#include <linux/time.h>
+#include <linux/sched.h>
+
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/db8500-regs.h>
+#include <mach/hardware.h>
+
+#include "dbx500-prcmu.h"
+#include "dbx500-prcmu-regs.h"
+#include "dbx540-prcmu-regs.h"
+
+/* Global var to runtime determine TCDM base for v2 or v1 */
+static __iomem void *tcdm_legacy_base;
+static __iomem void *tcdm_base;
+
+/* mailbox definition */
+static struct mb0_transfer mb0;
+static struct mb2_transfer mb2;
+static struct mb3_transfer mb3;
+static struct mb4_transfer mb4;
+static struct mb5_transfer mb5;
+
+/* Offset for the firmware version within the TCPM */
+#define PRCMU_FW_VERSION_OFFSET 0xA4
+
+#define PRCM_BOOT_STATUS 0xFFF
+
+#define PRCM_SW_RST_REASON 0xFF8 /* 2 bytes */
+
+#define PRCM_TCDM_VOICE_CALL_FLAG 0xDD4 /* 4 bytes */
+
+#define U9540_PRCM_UPAP_OFFSET 0x0A00
+
+/*
+ * UniqPAP (Request/Response/Notify) - U9540
+ */
+struct upap_arm_opp_req_data {
+ u32 freq;
+ u16 volt;
+ u16 bias;
+ u16 vbbp;
+ u16 vbbn;
+};
+
+struct upap_req {
+ u32 req_state;
+ u32 service_id;
+ u32 command_id;
+ u32 status;
+ union {
+ u32 data; /* default: single 32bit data */
+ struct upap_arm_opp_req_data arm_opp;
+ u8 full_data_buf[4*6]; /* TODO: check size from xp70 API */
+ } data;
+};
+
+struct upap_nfy {
+ u32 nfy_state;
+ u32 service_id;
+ u32 command_id;
+ union {
+ u32 data; /* default: single 32bit data */
+ u8 full_data_buf[4]; /* TODO: check size from xp70 API */
+ } data;
+};
+
+/* UniqPAP timeout */
+#define UPAP_TIM (HZ/10)
+
+/* UniqPAP Configuration */
+static struct upap_configuration {
+ struct upap_req *req;
+ struct upap_nfy *nfy;
+ u8 mbox_nb;
+} upap_conf;
+
+enum upap_req_state {
+ U9540_PRCM_UPAP_REQ_STATE_REQ_IDLE = 0,
+ U9540_PRCM_UPAP_REQ_STATE_REQ_SENT,
+ U9540_PRCM_UPAP_REQ_STATE_REQ_EXECUTING,
+ U9540_PRCM_UPAP_REQ_STATE_ACK_SENT,
+};
+
+enum upap_nfy_state {
+ U9540_PRCM_UPAP_NFY_STATE_IDLE = 0,
+ U9540_PRCM_UPAP_NFY_STATE_ONGOING,
+ U9540_PRCM_UPAP_NFY_STATE_SENT,
+};
+
+enum upap_service {
+ U9540_PRCM_UPAP_SERVICE_DDR = 0,
+ U9540_PRCM_UPAP_SERVICE_DVFS,
+ U9540_PRCM_UPAP_SERVICE_MODEM,
+ U9540_PRCM_UPAP_SERVICE_USB,
+ U9540_PRCM_UPAP_SERVICE_CLOCK,
+ U9540_PRCM_UPAP_SERVICE_C2C,
+ U9540_PRCM_UPAP_SERVICE_CPUHOTPLUG,
+ U9540_PRCM_UPAP_SERVICE_THSENSOR,
+ UPAP_SERVICES_NB,
+};
+
+enum upap_command {
+ /* req/resp commands */
+ U9540_PRCM_UPAP_COMMAND_SET_ARM_OPP = 0x1002,
+ U9540_PRCM_UPAP_COMMAND_SET_APE_OPP = 0x1003,
+ U9540_PRCM_UPAP_COMMAND_SET_SAFE_OPP = 0x1004,
+ U9540_PRCM_UPAP_COMMAND_DDR_SLEEP_STRAT = 0x2005,
+ U9540_PRCM_UPAP_COMMAND_RESET_MODEM = 0x3001,
+ U9540_PRCM_UPAP_COMMAND_USB_WAKEUP_REL = 0x4001,
+ U9540_PRCM_UPAP_COMMAND_PLL_ON_OFF = 0x5001,
+ U9540_PRCM_UPAP_COMMAND_C2CINIT = 0x6001,
+ U9540_PRCM_UPAP_COMMAND_C2CNOTIFYME = 0x6002,
+ U9540_PRCM_UPAP_COMMAND_C2CTESTWAKEUP = 0x6003,
+ U9540_PRCM_UPAP_COMMAND_C2CTESTSLEEP = 0x6004,
+ U9540_PRCM_UPAP_COMMAND_C2CRESET = 0x6005,
+ U9540_PRCM_UPAP_COMMAND_CPU1_UNPLUG = 0x7001,
+ U9540_PRCM_UPAP_COMMAND_CPU1_REPLUG = 0x7002,
+ /* nfy commands */
+ U9540_PRCM_UPAP_COMMAND_C2CNOTIFICATION = 0x601,
+ U9540_PRCM_UPAP_COMMAND_THSENSOR_GET_TEMP = 0x8001,
+};
+
+enum upap_status {
+ U9540_PRCM_UPAP_STATUS_OK = 0,
+ /* all non-0 IDs below report an error */
+ U9540_PRCM_UPAP_STATUS_UNKNOWN_CMD_ID,
+ U9540_PRCM_UPAP_STATUS_BAD_PARAM,
+ U9540_PRCM_UPAP_STATUS_PARTIAL_SELF_REFRESH_DDR_EXEC,
+ U9540_PRCM_UPAP_STATUS_QOS_DDR_EXEC,
+ U9540_PRCM_UPAP_STATUS_SET_ARM_OPP_EXEC,
+ U9540_PRCM_UPAP_STATUS_SET_ARM_OPP_INVAL,
+ U9540_PRCM_UPAP_STATUS_SET_APE_OPP_EXEC,
+ U9540_PRCM_UPAP_STATUS_SET_APE_OPP_INVAL,
+ U9540_PRCM_UPAP_STATUS_SET_SAFE_OPP_EXEC,
+ U9540_PRCM_UPAP_STATUS_SET_SAFE_OPP_INVAL,
+ U9540_PRCM_UPAP_STATUS_DVFS_PLL_NOT_LOCKED,
+ U9540_PRCM_UPAP_STATUS_C2C_UNKNOWN_ERR,
+ U9540_PRCM_UPAP_STATUS_BAD_STATE,
+ U9540_PRCM_UPAP_STATUS_CPUHOTPLUG_ALRDY_UNPLUGED,
+ U9540_PRCM_UPAP_STATUS_CPUHOTPLUG_NOT_UNPLUGED,
+ U9540_PRCM_UPAP_STATUS_CPUHOTPLUG_SECURE_ROM_ERR,
+ U9540_PRCM_UPAP_STATUS_CPUHOTPLUG_UNKNOWN_ERR,
+ U9540_PRCM_UPAP_STATUS_INVALID_STATE,
+ U9540_PRCM_UPAP_STATUS_CPUHOTPLUG_ARMVOK_TIMEOUT,
+ U9540_PRCM_UPAP_STATUS_CPUHOTPLUG_ROMCODESAVEOWNCTX_ERR,
+ U9540_PRCM_UPAP_STATUS_CPUHOTPLUG_WAKEUPNORESP_ROM_ERR,
+ U9540_PRCM_UPAP_STATUS_CPUHOTPLUG_RESPLSNOTDSTOREADY,
+ U9540_PRCM_UPAP_STATUS_OVERFLOW,
+ U9540_PRCM_UPAP_STATUS_BUSY,
+ U9540_PRCM_UPAP_STATUS_SET_ARM_OPP_FREQ_ERR,
+ U9540_PRCM_UPAP_STATUS_THSENSOR_ALL_READY,
+};
+
+enum upap_ape_opp_ids {
+ U9540_PRCM_REQ_UPAP_APE_OPP_1 = 0,
+ U9540_PRCM_REQ_UPAP_APE_OPP_2,
+};
+
+enum upap_pll_on_off_ids {
+ U9540_PRCM_REQ_UPAP_PLL_SOC0_OFF = 1,
+ U9540_PRCM_REQ_UPAP_PLL_SOC0_ON = 2,
+ U9540_PRCM_REQ_UPAP_PLL_SOC1_OFF = 4,
+ U9540_PRCM_REQ_UPAP_PLL_SOC1_ON = 8,
+};
+
+enum upap_vsafe_opp_ids {
+ U9540_PRCM_REQ_UPAP_VSAFE_OPP0 = 0,
+ U9540_PRCM_REQ_UPAP_VSAFE_OPP1,
+ U9540_PRCM_REQ_UPAP_VSAFE_OPP2,
+};
+
+enum uupap_c2c_ids {
+ U9540_PRCM_UPAP_NFYDAT_C2CNOTIF_OK = 0x601,
+ U9540_PRCM_REQ_DATA_C2C_NOTIFYME = 0x601,
+};
+
+/* UniqPAP Acknowledgement data: data copied from upap buffer */
+struct upap_ack {
+ u32 service_id;
+ u32 command_id;
+ u32 status;
+ u32 arm_freq;
+ u32 sensor_read;
+};
+
+/*
+ * upap_transfer - state needed for UniqPAP communication.
+ * @lock: The transaction lock.
+ * @work: The transaction completion structure.
+ * @ape_opp: The current APE OPP.
+ * @arm_freq: The current ARM Freq (U9540 only)
+ * @ack: Reply ("acknowledge") data. Structure used selected at run-
+ * time based on chip-set detected.
+ */
+static struct {
+ struct mutex lock;
+ struct completion work;
+ struct upap_ack *ack;
+} upap_transfer;
+
+/*
+ * dvfs_transfer - PRCMU need to save some dvfs context
+ * @ape_opp: The current APE OPP.
+ * @arm_freq: The current ARM Freq (U9540 only)
+ * @vsafe_opp: The current Vsafe state (U9540 only)
+ */
+struct {
+ u8 ape_opp;
+ u32 arm_freq;
+ u8 vsafe_opp;
+} dvfs_context;
+
+static void (*upap_read_services[UPAP_SERVICES_NB])(struct upap_req *req,
+ struct upap_ack *ack);
+
+static int cpu1_unplug_ongoing;
+static int prcmu_driver_initialised;
+static int set_arm_freq(u32 freq);
+static int get_arm_freq(void);
+
+static struct {
+ bool valid;
+ struct prcmu_fw_version version;
+} fw_info;
+
+static unsigned long latest_armss_rate;
+
+/*The timer time-base is in nano-seconde*/
+#define TIME_NS 1000000000ULL
+/* profiling cycle time (in second)*/
+#define PROFILING_CYCLE_TIME 4ULL
+/* STORE_CYCLE = TIME_NS*PROFILING_CYCLE_TIME in NS*/
+#define STORE_CYCLE (TIME_NS * PROFILING_CYCLE_TIME)
+/* 9540 aging in second (8 years by default)*/
+#define DB9540_AGING 252288000ULL
+/* 9540 aging in nano-second*/
+#define DB9540_AGING_TRADE (DB9540_AGING * TIME_NS)
+
+/* SecMap is at 0x300 from tcdm_legacy_base adress*/
+#define PRCMU_SECMAP 0x0300
+/* InitOppData is at 0x598 from SecMap */
+#define PRCM_INIT_OPP_DATA (PRCMU_SECMAP + 0x0598)
+/* OPP0 table is at 0x48 from InitOppData */
+#define PRCMU_OPP0_TABLE (PRCM_INIT_OPP_DATA + 0x0048)
+/* OPP0 enable/disable is at 0x6 from OPP0 table*/
+#define PRCMU_OPP0_IS_ENABLE (PRCMU_OPP0_TABLE + 0x0006)
+
+struct max_opp_profile {
+ u32 last_arm_opp;
+ u64 max_opp_cnt;
+ u64 secure_memory;
+ u64 cumul;
+ u64 start;
+};
+
+static struct max_opp_profile arm_max_opp_profile = {
+ .last_arm_opp = 0,
+ .max_opp_cnt = 0,
+ .secure_memory = 0,
+ .cumul = 0,
+ .start = 0,
+};
+
+static atomic_t ac_wake_req_state = ATOMIC_INIT(0);
+
+/* Spinlocks */
+static DEFINE_SPINLOCK(prcmu_lock);
+static DEFINE_SPINLOCK(clkout_lock);
+static DEFINE_SPINLOCK(spare_out_lock);
+
+/*
+ * Copies of the startup values of the reset status register and the SW reset
+ * code.
+ */
+static u32 reset_status_copy;
+static u16 reset_code_copy;
+
+static DEFINE_SPINLOCK(clk_mgt_lock);
+
+#define CLK_MGT_ENTRY(_name, _branch, _clk38div)[PRCMU_##_name] = \
+ { (PRCM_##_name##_MGT), 0 , _branch, _clk38div}
+static struct clk_mgt clk_mgt[PRCMU_NUM_REG_CLOCKS] = {
+ CLK_MGT_ENTRY(SGACLK, PLL_DIV, false),
+ CLK_MGT_ENTRY(UARTCLK, PLL_FIX, true),
+ CLK_MGT_ENTRY(MSP02CLK, PLL_FIX, true),
+ CLK_MGT_ENTRY(MSP1CLK, PLL_FIX, true),
+ CLK_MGT_ENTRY(I2CCLK, PLL_FIX, true),
+ CLK_MGT_ENTRY(SDMMCCLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(SLIMCLK, PLL_FIX, true),
+ CLK_MGT_ENTRY(PER1CLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(PER2CLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(PER3CLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(PER5CLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(PER6CLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(PER7CLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(LCDCLK, PLL_FIX, true),
+ CLK_MGT_ENTRY(BMLCLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(HSITXCLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(HSIRXCLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(HDMICLK, PLL_FIX, false),
+ CLK_MGT_ENTRY(APEATCLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(APETRACECLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(MCDECLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(IPI2CCLK, PLL_FIX, true),
+ CLK_MGT_ENTRY(DSIALTCLK, PLL_FIX, false),
+ CLK_MGT_ENTRY(DMACLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(ACLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(B2R2CLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(TVCLK, PLL_FIX, true),
+ CLK_MGT_ENTRY(SSPCLK, PLL_FIX, true),
+ CLK_MGT_ENTRY(RNGCLK, PLL_FIX, true),
+ CLK_MGT_ENTRY(UICCCLK, PLL_FIX, false),
+ CLK_MGT_ENTRY(HVACLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(G1CLK, PLL_DIV, true),
+ CLK_MGT_ENTRY(SPARE1CLK, PLL_FIX, true),
+};
+
+struct dsiclk {
+ u32 divsel_mask;
+ u32 divsel_shift;
+ u32 divsel;
+ u32 divsel_lcd_mask; /* For LCD DSI PLL supported by U9540 */
+};
+
+static struct dsiclk u9540_dsiclk[2] = {
+ {
+ .divsel_mask =
+ U9540_PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_MASK,
+ .divsel_shift = PRCM_DSI_PLLOUT_SEL_DSI0_PLLOUT_DIVSEL_SHIFT,
+ .divsel = PRCM_DSI_PLLOUT_SEL_PHI,
+ .divsel_lcd_mask = BIT(3),
+ },
+ {
+ .divsel_mask =
+ U9540_PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_MASK,
+ .divsel_shift = PRCM_DSI_PLLOUT_SEL_DSI1_PLLOUT_DIVSEL_SHIFT,
+ .divsel = PRCM_DSI_PLLOUT_SEL_PHI,
+ .divsel_lcd_mask = BIT(11),
+ }
+};
+
+struct dsiescclk {
+ u32 en;
+ u32 div_mask;
+ u32 div_shift;
+};
+
+static struct dsiescclk dsiescclk[3] = {
+ {
+ .en = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_EN,
+ .div_mask = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_MASK,
+ .div_shift = PRCM_DSITVCLK_DIV_DSI0_ESC_CLK_DIV_SHIFT,
+ },
+ {
+ .en = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_EN,
+ .div_mask = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_MASK,
+ .div_shift = PRCM_DSITVCLK_DIV_DSI1_ESC_CLK_DIV_SHIFT,
+ },
+ {
+ .en = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_EN,
+ .div_mask = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_MASK,
+ .div_shift = PRCM_DSITVCLK_DIV_DSI2_ESC_CLK_DIV_SHIFT,
+ }
+};
+
+static u32 ddr_sleep_strat_policy[PRCMU_DDR_SLEEP_STRAT_LP_MODE_NB]
+ [PRCMU_DDR_SLEEP_STRAT_DDRCTRL_NB] =
+{
+ {
+ DDRCTRLSTATE_ON, /* Ctrl0ApIdle */
+ DDRCTRLSTATE_ON /* Ctrl1ApIdle */
+ },
+ {
+ DDRCTRLSTATE_ON, /* Ctrl0ApDeepIdle */
+ DDRCTRLSTATE_ON /* Ctrl1ApDeepIdle */
+ },
+ {
+ DDRCTRLSTATE_OFFHIGHLAT, /* Ctrl0ApSleep */
+ DDRCTRLSTATE_OFFHIGHLAT /* Ctrl1ApSleep */
+ }
+};
+
+/*
+* Used by MCDE to setup all necessary PRCMU registers
+*/
+#define PRCMU_RESET_DSIPLLTV 0x00004000
+#define PRCMU_RESET_DSIPLLLCD 0x00008000
+#define PRCMU_UNCLAMP_DSIPLL 0x00400800
+
+#define PRCMU_CLK_PLL_DIV_SHIFT 0
+#define PRCMU_CLK_PLL_SW_SHIFT 5
+#define PRCMU_CLK_38 (1 << 9)
+#define PRCMU_CLK_38_SRC (1 << 10)
+#define PRCMU_CLK_38_DIV (1 << 11)
+
+/* PLLDIV=12, PLLSW=4 (PLLDDR) */
+#define PRCMU_DSI_CLOCK_SETTING 0x0000008C
+/* PLLDIV = 12, PLLSW=1 (PLLSOC0) */
+#define U9540_PRCMU_DSI_CLOCK_SETTING 0x0000002C
+
+/* DPI 50000000 Hz */
+#define PRCMU_DPI_CLOCK_SETTING ((1 << PRCMU_CLK_PLL_SW_SHIFT) | \
+ (16 << PRCMU_CLK_PLL_DIV_SHIFT))
+#define PRCMU_DSI_LP_CLOCK_SETTING 0x00000E00
+
+/* D=101, N=1, R=4, SELDIV2=0 */
+#define PRCMU_PLLDSI_FREQ_SETTING 0x00040165
+
+#define PRCMU_ENABLE_PLLDSI 0x00000001
+#define PRCMU_DISABLE_PLLDSI 0x00000000
+#define PRCMU_RELEASE_RESET_DSS 0x0000400C
+#define PRCMU_TV_DSI_PLLOUT_SEL_SETTING 0x00000202
+#define PRCMU_LCD_DSI_PLLOUT_SEL_SETTING 0x00000A0A
+/* ESC clk, div0=1, div1=1, div2=3 */
+#define PRCMU_ENABLE_ESCAPE_CLOCK_DIV 0x07030101
+#define PRCMU_DISABLE_ESCAPE_CLOCK_DIV 0x00030101
+#define PRCMU_DSI_RESET_SW 0x00000007
+
+#define PRCMU_PLLDSI_LOCKP_LOCKED 0x3
+
+/**
+ * upap_init
+ * initialization UniqPAP link
+ */
+static void upap_init(void)
+{
+ upap_conf.req = (struct upap_req *)(tcdm_base + U9540_PRCM_UPAP_OFFSET);
+ upap_conf.nfy = (struct upap_nfy *)(tcdm_base + U9540_PRCM_UPAP_OFFSET +
+ sizeof(struct upap_req));
+ upap_conf.mbox_nb = 1;
+
+ mutex_init(&upap_transfer.lock);
+ init_completion(&upap_transfer.work);
+}
+
+/**
+ * db9540_prcmu_upap_wait_released
+ * Utility function which blocks until Mailbox is released.
+ */
+static inline void db9540_prcmu_upap_wait_released(void)
+{
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(upap_conf.mbox_nb))
+ cpu_relax();
+}
+
+/**
+ * db9540_prcmu_upap_wait_for_idle
+ * Utility function which blocks until uniqPAP is in its Idle state.
+ */
+static inline void db9540_prcmu_upap_wait_for_idle(void)
+{
+ while (upap_conf.req->req_state != U9540_PRCM_UPAP_REQ_STATE_REQ_IDLE)
+ cpu_relax();
+}
+
+/**
+ * upap_send_request
+ * Generic to send UniqPAP request to PRCMU
+ */
+static void upap_send_request(struct upap_req *req, struct upap_ack *ack,
+ int data_size)
+{
+ mutex_lock(&upap_transfer.lock);
+
+ /* save ack structure */
+ upap_transfer.ack = ack;
+
+ /* Wait for MBOX to become idle */
+ db9540_prcmu_upap_wait_released();
+ /* Ensure MB1 is in Idle state */
+ db9540_prcmu_upap_wait_for_idle();
+
+ /* Write to TCDM (header and data, then req_state) */
+ upap_conf.req->service_id = req->service_id;
+ upap_conf.req->command_id = req->command_id;
+ upap_conf.req->req_state = req->req_state;
+ if (data_size)
+ memcpy(&upap_conf.req->data.data, &req->data.data, data_size);
+
+ /* Set interrupt ARM -> PRCMU */
+ writel(MBOX_BIT(upap_conf.mbox_nb), PRCM_MBOX_CPU_SET);
+ WARN_ON(wait_for_completion_timeout(&upap_transfer.work, UPAP_TIM)== 0);
+
+ mutex_unlock(&upap_transfer.lock);
+}
+
+/**
+ * upap_register_ack_service
+ * dynamic service acknoledge registering
+ */
+static int upap_register_ack_service(u32 service_id, void (*service_ack)(struct upap_req *req,
+ struct upap_ack *ack))
+{
+ if(service_id >= UPAP_SERVICES_NB)
+ return -EINVAL;
+
+ if(upap_read_services[service_id] == NULL)
+ upap_read_services[service_id] = service_ack;
+ else
+ return -EBUSY;
+ return 0;
+}
+
+/**
+ * unplug_cpu1 - Power gate OFF CPU1 for U9540
+ * * void:
+ * Returns:
+ */
+static int unplug_cpu1(void)
+{
+ int r = 0;
+#ifdef CONFIG_UX500_ROMCODE_SHARED_MUTEX
+ struct upap_req req;
+ struct upap_ack ack;
+
+ /* Set flag start Hotplug sequence */
+ cpu1_unplug_ongoing = 1;
+
+ /* Fill request (header and data, then req_state) */
+ req.service_id = U9540_PRCM_UPAP_SERVICE_CPUHOTPLUG;
+ req.command_id = U9540_PRCM_UPAP_COMMAND_CPU1_UNPLUG;
+ req.req_state = U9540_PRCM_UPAP_REQ_STATE_REQ_SENT;
+
+ upap_send_request(&req, &ack, 0);
+
+ /* Check response from PRCMU */
+ if ((ack.service_id == U9540_PRCM_UPAP_SERVICE_CPUHOTPLUG) &&
+ (ack.command_id == U9540_PRCM_UPAP_COMMAND_CPU1_UNPLUG)) {
+ switch (ack.status) {
+ case U9540_PRCM_UPAP_STATUS_CPUHOTPLUG_UNKNOWN_ERR:
+ pr_err("PRCMU: %s, unknown error\n", __func__);
+ WARN_ON(1);
+ break;
+ case U9540_PRCM_UPAP_STATUS_CPUHOTPLUG_ROMCODESAVEOWNCTX_ERR:
+ pr_err("PRCMU: %s, CPU1 ROM code err: save own context error\n"
+ , __func__);
+ break;
+ }
+ } else {
+ r = -EIO;
+ pr_err("PRCMU - bad ack in %s. %u %u %u\n", __func__,
+ ack.service_id, ack.command_id, ack.status);
+ }
+ /* set flag HotPlug sequence end */
+ cpu1_unplug_ongoing = 0;
+#endif
+ return r;
+}
+
+/**
+ * replug_cpu1 - Power gate ON CPU1 for U9540
+ * * void
+ * * Returns:
+ */
+static int replug_cpu1(void)
+{
+ int r = 0;
+#ifdef CONFIG_UX500_ROMCODE_SHARED_MUTEX
+ struct upap_req req;
+ struct upap_ack ack;
+
+ if (prcmu_driver_initialised == 0) {
+ pr_info("PRCMU: %s, PRCMU DRIVER NOT INITIALISED\n", __func__);
+ return 0;
+ }
+
+ /* Fill request (header and data, then req_state) */
+ req.service_id = U9540_PRCM_UPAP_SERVICE_CPUHOTPLUG;
+ req.command_id = U9540_PRCM_UPAP_COMMAND_CPU1_REPLUG;
+ req.req_state = U9540_PRCM_UPAP_REQ_STATE_REQ_SENT;
+
+ upap_send_request(&req, &ack, 0);
+
+ /* Check response from PRCMU */
+ if ((ack.service_id == U9540_PRCM_UPAP_SERVICE_CPUHOTPLUG) &&
+ (ack.command_id == U9540_PRCM_UPAP_COMMAND_CPU1_REPLUG)) {
+ switch (ack.status) {
+ case U9540_PRCM_UPAP_STATUS_CPUHOTPLUG_UNKNOWN_ERR:
+ pr_err("PRCMU: %s, unknown error\n", __func__);
+ WARN_ON(1);
+ break;
+ case U9540_PRCM_UPAP_STATUS_CPUHOTPLUG_WAKEUPNORESP_ROM_ERR:
+ pr_err("PRCMU: %s, CPU1 Rom code err: no resp at wake up\n"
+ , __func__);
+ WARN_ON(1);
+ break;
+ case U9540_PRCM_UPAP_STATUS_CPUHOTPLUG_RESPLSNOTDSTOREADY:
+ pr_err("PRCMU: %s, CPU1 Rom code err: no Ds to Rdy\n"
+ , __func__);
+ WARN_ON(1);
+ break;
+ }
+ } else {
+ r = -EIO;
+ pr_err("PRCMU - bad ack in %s. %u %u %u\n", __func__,
+ ack.service_id, ack.command_id, ack.status);
+ }
+#endif
+ return r;
+}
+
+static struct cpufreq_frequency_table *freq_table;
+
+static struct prcmu_fw_version *get_fw_version(void)
+{
+ return fw_info.valid ? &fw_info.version : NULL;
+}
+
+
+bool has_arm_maxopp(void)
+{
+ if(readw(tcdm_base+PRCMU_OPP0_IS_ENABLE) != 1)
+ return false;
+ else
+ return true;
+}
+
+static void update_freq_table(struct cpufreq_frequency_table *table)
+{
+ if (has_arm_maxopp())
+ table[5].frequency = 1850000;
+#ifdef CONFIG_MFD_DBX540_FREQ_LIMITATION
+ {
+ int i;
+ /* remove 266 MHz frequency that creates re-entering condition */
+ for (i = 0; i < 5; i++)
+ table[i].frequency = table[i+1].frequency;
+ table[5].frequency = CPUFREQ_TABLE_END;
+ }
+#endif
+}
+
+/**
+ * config_clkout - Configure one of the programmable clock outputs.
+ * @clkout: The CLKOUT number (0 or 1).
+ * @source: The clock to be used (one of the PRCMU_CLKSRC_*).
+ * @div: The divider to be applied.
+ *
+ * Configures one of the programmable clock outputs (CLKOUTs).
+ * @div should be in the range [1,63] to request a configuration, or 0 to
+ * inform that the configuration is no longer requested.
+ */
+static int config_clkout(u8 clkout, u8 source, u8 div)
+{
+ static int requests[2];
+ int r = 0;
+ unsigned long flags;
+ u32 val;
+ u32 bits;
+ u32 mask;
+ u32 div_mask;
+
+ BUG_ON(clkout > 1);
+ BUG_ON(div > 63);
+ BUG_ON((clkout == 0) && (source > PRCMU_CLKSRC_CLK009));
+
+ if (!div && !requests[clkout])
+ return -EINVAL;
+
+ switch (clkout) {
+ case 0:
+ div_mask = PRCM_CLKOCR_CLKODIV0_MASK;
+ mask = (PRCM_CLKOCR_CLKODIV0_MASK | PRCM_CLKOCR_CLKOSEL0_MASK);
+ bits = ((source << PRCM_CLKOCR_CLKOSEL0_SHIFT) |
+ (div << PRCM_CLKOCR_CLKODIV0_SHIFT));
+ break;
+ case 1:
+ div_mask = PRCM_CLKOCR_CLKODIV1_MASK;
+ mask = (PRCM_CLKOCR_CLKODIV1_MASK | PRCM_CLKOCR_CLKOSEL1_MASK |
+ PRCM_CLKOCR_CLK1TYPE);
+ bits = ((source << PRCM_CLKOCR_CLKOSEL1_SHIFT) |
+ (div << PRCM_CLKOCR_CLKODIV1_SHIFT));
+ break;
+ }
+ bits &= mask;
+
+ spin_lock_irqsave(&clkout_lock, flags);
+
+ val = readl(PRCM_CLKOCR);
+ if (val & div_mask) {
+ if (div) {
+ if ((val & mask) != bits) {
+ r = -EBUSY;
+ goto unlock_and_return;
+ }
+ } else {
+ if ((val & mask & ~div_mask) != bits) {
+ r = -EINVAL;
+ goto unlock_and_return;
+ }
+ }
+ }
+ writel((bits | (val & ~mask)), PRCM_CLKOCR);
+ requests[clkout] += (div ? 1 : -1);
+
+unlock_and_return:
+ spin_unlock_irqrestore(&clkout_lock, flags);
+
+ return r;
+}
+
+/* transition translation table to FW magic number */
+static u8 dbx540_fw_trans[] = {
+ 0x00,/* PRCMU_AP_NO_CHANGE */
+ 0x10,/* PRCMU_AP_SLEEP */
+ 0x43,/* PRCMU_AP_DEEP_SLEEP */
+ 0x50,/* PRCMU_AP_IDLE */
+ 0x73,/* PRCMU_AP_DEEP_IDLE */
+};
+
+static int stay_in_wfi_check(void)
+{
+ int stay_in_wfi = 0;
+ u8 status;
+
+ status = readb(tcdm_legacy_base + PRCM_ACK_MB0_AP_PWRSTTR_STATUS);
+
+ if ((status == EXECUTETODEEPSLEEP)
+ || (status == EXECUTETODEEPIDLE)) {
+ stay_in_wfi = 1;
+ }
+ if (cpu1_unplug_ongoing == 1)
+ stay_in_wfi = 1;
+
+ return stay_in_wfi;
+}
+
+/*
+ * set_arm_freq - set the appropriate ARM frequency for U9540
+ * @freq: The new ARM frequency to which transition is to be made (kHz)
+ * Returns: 0 on success, non-zero on failure
+ */
+static int set_arm_freq(u32 freq)
+{
+ struct upap_req req;
+ struct upap_ack ack;
+ int r = 0;
+
+ if (dvfs_context.arm_freq == freq)
+ return 0;
+
+ /* Prepare request (header and data, then req_state) */
+ req.service_id = U9540_PRCM_UPAP_SERVICE_DVFS;
+ req.command_id = U9540_PRCM_UPAP_COMMAND_SET_ARM_OPP;
+ req.data.arm_opp.freq = freq;
+ req.data.arm_opp.volt = 0;
+ req.data.arm_opp.bias = 0;
+ req.data.arm_opp.vbbp = 0;
+ req.data.arm_opp.vbbn = 0;
+ req.req_state = U9540_PRCM_UPAP_REQ_STATE_REQ_SENT;
+
+ upap_send_request(&req, &ack, sizeof(struct upap_arm_opp_req_data));
+
+ /* Check response from PRCMU */
+ if ((ack.service_id == U9540_PRCM_UPAP_SERVICE_DVFS) &&
+ (ack.command_id == U9540_PRCM_UPAP_COMMAND_SET_ARM_OPP) &&
+ (ack.status == U9540_PRCM_UPAP_STATUS_OK)) {
+ dvfs_context.arm_freq = freq;
+ latest_armss_rate = freq;
+ } else {
+ r = -EIO;
+ pr_info("PRCMU - bad ack in %s. %u %u %u %u %u\n", __func__,
+ ack.service_id, ack.command_id, ack.status, ack.arm_freq,
+ freq);
+ }
+
+ return r;
+}
+
+/**
+ * get_arm_freq - get the current ARM freq
+ *
+ * Returns: the current ARM freq (kHz).
+ * Not supported by U8500
+ */
+static int get_arm_freq(void)
+{
+ u32 val;
+ /*
+ * U9540 is not able to read ARM OPP value from TCDM. Therefore
+ * determine if the ARM OPP has been set, or not.
+ */
+ if (dvfs_context.arm_freq != 0)
+ return dvfs_context.arm_freq;
+
+ /* ARM OPP value not yet initialised. Read value from register. */
+ val = readl(PRCM_POWER_STATE_VAL);
+ val &= PRCM_POWER_STATE_VAL_VARM_STATE_OPP_MASK;
+ val >>= PRCM_POWER_STATE_VAL_VARM_STATE_OPP_SHIFT;
+
+ switch (val) {
+ case 0x00:
+ return 1850000;
+ case 0x01:
+ return 1500000;
+ case 0x02:
+ return 1200000;
+ case 0x03:
+ return 800000;
+ case 0x04:
+ return 400000;
+ case 0x05:
+ return 266000;
+ default:
+ pr_warn("prcmu: %s Unknown ARM OPP val %d\n", __func__, val);
+ /* Return fastest non-"speed-binned" frequency */
+ return 1500000;
+ }
+}
+
+/**
+ * prcmu_get_vsafe_opp - get the current VSAFE OPP
+ *
+ * Returns: the current VSAFE OPP
+ */
+int prcmu_get_vsafe_opp(void)
+{
+ /*
+ * U9540 is not able to read VSAFE OPP value from TCDM. Therefore
+ * determine if the VSAFE OPP has been set, or not.
+ */
+ if (dvfs_context.vsafe_opp != 0) {
+ return dvfs_context.vsafe_opp;
+ } else {
+ /*
+ * VSAFE OPP value not yet initialised.
+ * Return default (reset) value.
+ */
+ return VSAFE_100_OPP;
+ }
+}
+
+/**
+ * prcmu_set_vsafe_opp - set the appropriate VSAFE OPP
+ * @opp: The new VSAFE operating point to which transition is to be made
+ * Returns: 0 on success, non-zero on failure
+ *
+ * This function sets the operating point of the VSAFE.
+ */
+int prcmu_set_vsafe_opp(u8 opp)
+{
+ struct upap_req req;
+ struct upap_ack ack;
+ int r = 0;
+ u32 prcmu_opp;
+
+ switch (opp) {
+ case VSAFE_50_OPP:
+ case VSAFE_100_OPP:
+ prcmu_opp = U9540_PRCM_REQ_UPAP_VSAFE_OPP2;
+ break;
+ default:
+ /* Do nothing */
+ return 0;
+ }
+
+ /* Prepare request */
+ req.service_id = U9540_PRCM_UPAP_SERVICE_DVFS;
+ req.command_id = U9540_PRCM_UPAP_COMMAND_SET_SAFE_OPP;
+ req.data.data = prcmu_opp;
+ req.req_state = U9540_PRCM_UPAP_REQ_STATE_REQ_SENT;
+
+ upap_send_request(&req, &ack, sizeof(u32));
+
+ /*
+ * Check response from PRCMU. U9540 TCDM does not contain current OPP
+ * so we cannot check its value.
+ */
+ if ((ack.service_id == U9540_PRCM_UPAP_SERVICE_DVFS) &&
+ (ack.command_id == U9540_PRCM_UPAP_COMMAND_SET_SAFE_OPP) &&
+ (ack.status == U9540_PRCM_UPAP_STATUS_OK)) {
+ dvfs_context.vsafe_opp = prcmu_opp;
+ } else {
+ r = -EIO;
+ pr_info("PRCMU - bad ack in %s. %u %u %u %u\n", __func__,
+ ack.service_id, ack.command_id, ack.status, opp);
+ }
+
+ return r;
+}
+
+/**
+ * get_ddr_opp - get the current DDR OPP
+ *
+ * Returns: the current DDR OPP
+ */
+int get_ddr_opp(void)
+{
+ return readb(PRCM_DDR_SUBSYS_APE_MINBW);
+}
+
+/**
+ * get_ddr1_opp - get the current DDR1 OPP
+ *
+ * Returns: the current DDR1 OPP
+ */
+int get_ddr1_opp(void)
+{
+ return readb(PRCM_DDR1_SUBSYS_APE_MINBW);
+}
+
+/**
+ * set_ddr_opp - set the appropriate DDR OPP
+ * @opp: The new DDR operating point to which transition is to be made
+ * Returns: 0 on success, non-zero on failure
+ *
+ * This function sets the operating point of the DDR.
+ */
+int set_ddr_opp(u8 opp)
+{
+ if (opp < DDR_100_OPP || opp > DDR_25_OPP)
+ return -EINVAL;
+ /* Changing the DDR OPP can hang the hardware pre-v21 */
+ writeb(opp, PRCM_DDR_SUBSYS_APE_MINBW);
+ writeb(opp, PRCM_DDR1_SUBSYS_APE_MINBW);
+
+ return 0;
+}
+
+/* Divide the frequency of certain clocks by 2 for APE_50_PARTLY_25_OPP. */
+static void request_even_slower_clocks(bool enable)
+{
+ void __iomem *clock_reg[] = {
+ PRCM_ACLK_MGT,
+ PRCM_DMACLK_MGT
+ };
+ unsigned long flags;
+ unsigned int i;
+
+ spin_lock_irqsave(&clk_mgt_lock, flags);
+
+ /* Grab the HW semaphore. */
+ while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
+ cpu_relax();
+
+ for (i = 0; i < ARRAY_SIZE(clock_reg); i++) {
+ u32 val;
+ u32 div;
+
+ val = readl(clock_reg[i]);
+ div = (val & PRCM_CLK_MGT_CLKPLLDIV_MASK);
+ if (enable) {
+ if ((div <= 1) || (div > 15)) {
+ pr_err("prcmu: Bad clock divider %d in %s\n",
+ div, __func__);
+ goto unlock_and_return;
+ }
+ div <<= 1;
+ } else {
+ if (div <= 2)
+ goto unlock_and_return;
+ div >>= 1;
+ }
+ val = ((val & ~PRCM_CLK_MGT_CLKPLLDIV_MASK) |
+ (div & PRCM_CLK_MGT_CLKPLLDIV_MASK));
+ writel(val, clock_reg[i]);
+ }
+
+unlock_and_return:
+ /* Release the HW semaphore. */
+ writel(0, PRCM_SEM);
+
+ spin_unlock_irqrestore(&clk_mgt_lock, flags);
+}
+
+static int db9540_prcmu_write_ape_opp(u8 opp)
+{
+ struct upap_req req;
+ struct upap_ack ack;
+ int r = 0;
+ u32 prcmu_opp;
+
+ switch (opp) {
+ case APE_50_OPP:
+ case APE_50_PARTLY_25_OPP:
+ prcmu_opp = U9540_PRCM_REQ_UPAP_APE_OPP_1;
+ break;
+ case APE_100_OPP:
+ prcmu_opp = U9540_PRCM_REQ_UPAP_APE_OPP_2;
+ break;
+ case APE_OPP_INIT:
+ case APE_NO_CHANGE:
+ default:
+ /* Do nothing */
+ return 0;
+ }
+
+ /* Prepare request */
+ req.service_id = U9540_PRCM_UPAP_SERVICE_DVFS;
+ req.command_id = U9540_PRCM_UPAP_COMMAND_SET_APE_OPP;
+ req.data.data = prcmu_opp;
+ req.req_state = U9540_PRCM_UPAP_REQ_STATE_REQ_SENT;
+
+ upap_send_request(&req, &ack, sizeof(u32));
+
+ /*
+ * Check response from PRCMU. U9540 TCDM does not contain current OPP
+ * so we cannot check its value.
+ */
+ if ((ack.service_id == U9540_PRCM_UPAP_SERVICE_DVFS) &&
+ (ack.command_id == U9540_PRCM_UPAP_COMMAND_SET_APE_OPP) &&
+ (ack.status == U9540_PRCM_UPAP_STATUS_OK)) {
+ r = 0;
+ } else {
+ r = -EIO;
+ pr_info("PRCMU - bad ack in %s. %u %u %u %u\n", __func__,
+ ack.service_id, ack.command_id, ack.status, prcmu_opp);
+ }
+
+ return r;
+}
+
+/**
+ * set_ape_opp - set the appropriate APE OPP
+ * @opp: The new APE operating point to which transition is to be made
+ * Returns: 0 on success, non-zero on failure
+ *
+ * This function sets the operating point of the APE.
+ */
+static int set_ape_opp(u8 opp)
+{
+ int r = 0;
+
+ if (opp == dvfs_context.ape_opp)
+ return 0;
+
+ /* Exit APE_50_PARTLY_25_OPP */
+ if (dvfs_context.ape_opp == APE_50_PARTLY_25_OPP)
+ request_even_slower_clocks(false);
+
+ if ((opp != APE_100_OPP) && (dvfs_context.ape_opp != APE_100_OPP))
+ goto skip_message;
+
+ r = db9540_prcmu_write_ape_opp(opp);
+skip_message:
+ if ((!r && (opp == APE_50_PARTLY_25_OPP)) ||
+ /* Set APE_50_PARTLY_25_OPP back in case new opp failed */
+ (r && (dvfs_context.ape_opp == APE_50_PARTLY_25_OPP)))
+ request_even_slower_clocks(true);
+ if (!r)
+ dvfs_context.ape_opp = opp;
+
+ return r;
+}
+
+/**
+ * get_ape_opp - get the current APE OPP
+ *
+ * Returns: the current APE OPP
+ */
+static int get_ape_opp(void)
+{
+ u32 val;
+ /*
+ * U9540 is not able to read APE OPP value from TCDM. Therefore
+ * determine if the APE OPP has been set, or not.
+ */
+ if (dvfs_context.ape_opp != APE_OPP_INIT)
+ return dvfs_context.ape_opp;
+
+ /*
+ * APE OPP value not yet initialised. Read value from
+ * register.
+ */
+ val = readl(PRCM_POWER_STATE_VAL);
+ val &= PRCM_POWER_STATE_VAL_VAPE_STATE_OPP_MASK;
+ val >>= PRCM_POWER_STATE_VAL_VAPE_STATE_OPP_SHIFT;
+ switch (val) {
+ case 0x00:
+ return APE_100_OPP;
+ case 0x01:
+ return APE_50_OPP;
+ default:
+ pr_warn("prcmu: %s Unknown APE OPP val %d\n", __func__, val);
+ return APE_OPP_INIT;
+ }
+}
+
+/**
+ * request_ape_opp_100_voltage - Request APE OPP 100% voltage
+ * @enable: true to request the higher voltage, false to drop a request.
+ *
+ * Calls to this function to enable and disable requests must be balanced.
+ * Not supported by U9540
+ */
+static int request_ape_opp_100_voltage(bool enable)
+{
+ pr_debug("prcmu: %s not supported\n", __func__);
+ return 0;
+}
+
+static int db9540_prcmu_release_usb_wakeup_state(void)
+{
+ struct upap_req req;
+ struct upap_ack ack;
+ int r = 0;
+
+ /* Write to TCDM */
+ req.service_id = U9540_PRCM_UPAP_SERVICE_USB;
+ req.command_id = U9540_PRCM_UPAP_COMMAND_USB_WAKEUP_REL;
+ req.req_state = U9540_PRCM_UPAP_REQ_STATE_REQ_SENT;
+
+ upap_send_request(&req, &ack, 0);
+
+ /* Check response from PRCMU */
+ if ((ack.service_id == U9540_PRCM_UPAP_SERVICE_USB) &&
+ (ack.command_id ==
+ U9540_PRCM_UPAP_COMMAND_USB_WAKEUP_REL) &&
+ (ack.status == U9540_PRCM_UPAP_STATUS_OK)) {
+ r = 0;
+ } else {
+ r = -EIO;
+ pr_info("PRCMU - bad ack in %s. %u %u %u\n", __func__,
+ ack.service_id, ack.command_id, ack.status);
+ }
+
+ return r;
+}
+
+/**
+ * dbx540_prcmu_release_usb_wakeup_state - release the state required by a USB wakeup
+ *
+ * This function releases the power state requirements of a USB wakeup.
+ */
+int dbx540_prcmu_release_usb_wakeup_state(void)
+{
+ return (db9540_prcmu_release_usb_wakeup_state());
+}
+
+static int db9540_request_pll(u8 clock, bool enable)
+{
+ int r;
+ u32 prcmu_clock;
+ struct upap_req req;
+ struct upap_ack ack;
+
+ if (clock == PRCMU_PLLSOC0)
+ prcmu_clock = (enable ? U9540_PRCM_REQ_UPAP_PLL_SOC0_ON :
+ U9540_PRCM_REQ_UPAP_PLL_SOC0_OFF);
+ else if (clock == PRCMU_PLLSOC1)
+ prcmu_clock = (enable ? U9540_PRCM_REQ_UPAP_PLL_SOC1_ON :
+ U9540_PRCM_REQ_UPAP_PLL_SOC1_OFF);
+
+ /* Prepare request */
+ req.service_id = U9540_PRCM_UPAP_SERVICE_CLOCK;
+ req.command_id = U9540_PRCM_UPAP_COMMAND_PLL_ON_OFF;
+ req.data.data = prcmu_clock;
+ req.req_state = U9540_PRCM_UPAP_REQ_STATE_REQ_SENT;
+
+ upap_send_request(&req, &ack, sizeof(u32));
+
+ /* Check response from PRCMU */
+ if ((ack.service_id == U9540_PRCM_UPAP_SERVICE_CLOCK) &&
+ (ack.command_id == U9540_PRCM_UPAP_COMMAND_PLL_ON_OFF)
+ && (ack.status == U9540_PRCM_UPAP_STATUS_OK))
+ r = 0;
+ else {
+ r = -EIO;
+ pr_info("PRCMU - bad ack in %s. %u %u %u\n", __func__,
+ ack.service_id, ack.command_id, ack.status);
+ }
+
+ return r;
+}
+
+static int request_pll(u8 clock, bool enable)
+{
+ if (clock != PRCMU_PLLSOC1)
+ return -EINVAL;
+
+ return db9540_request_pll(clock, enable);
+}
+
+static int request_sysclk(bool enable)
+{
+ int r = 0;
+ unsigned long flags;
+
+ mutex_lock(&mb3.sysclk_lock);
+
+ spin_lock_irqsave(&mb3.lock, flags);
+
+ while (readl(PRCM_MBOX_CPU_VAL) & MBOX_BIT(3))
+ cpu_relax();
+
+ writeb((enable ? ON : OFF), tcdm_legacy_base + PRCM_REQ_MB3_SYSCLK_MGT);
+
+ writeb(MB3H_SYSCLK, (tcdm_legacy_base + PRCM_MBOX_HEADER_REQ_MB3));
+ writel(MBOX_BIT(3), PRCM_MBOX_CPU_SET);
+
+ spin_unlock_irqrestore(&mb3.lock, flags);
+
+ /*
+ * The firmware only sends an ACK if we want to enable the
+ * SysClk, and it succeeds.
+ */
+ if (enable && !wait_for_completion_timeout(&mb3.sysclk_work,
+ msecs_to_jiffies(20000))) {
+ pr_err("prcmu: %s timed out (20 s) waiting for a reply.\n",
+ __func__);
+ r = -EIO;
+ }
+
+ mutex_unlock(&mb3.sysclk_lock);
+
+ return r;
+}
+
+static int request_timclk(bool enable)
+{
+ u32 val = (PRCM_TCR_DOZE_MODE | PRCM_TCR_TENSEL_MASK);
+
+ if (!enable)
+ val |= PRCM_TCR_STOP_TIMERS;
+ writel(val, PRCM_TCR);
+
+ return 0;
+}
+
+static int request_clock(u8 clock, bool enable)
+{
+ u32 val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&clk_mgt_lock, flags);
+
+ /* Grab the HW semaphore. */
+ while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
+ cpu_relax();
+
+ val = readl(clk_mgt[clock].reg);
+ if (enable) {
+ val |= (PRCM_CLK_MGT_CLKEN | clk_mgt[clock].pllsw);
+ } else {
+ clk_mgt[clock].pllsw = (val & PRCM_CLK_MGT_CLKPLLSW_MASK);
+ val &= ~(PRCM_CLK_MGT_CLKEN | PRCM_CLK_MGT_CLKPLLSW_MASK);
+ }
+ writel(val, clk_mgt[clock].reg);
+
+ /* Release the HW semaphore. */
+ writel(0, PRCM_SEM);
+
+ spin_unlock_irqrestore(&clk_mgt_lock, flags);
+
+ return 0;
+}
+
+static int request_sga_clock(u8 clock, bool enable)
+{
+ u32 val;
+ int ret;
+
+ if (enable) {
+ val = readl(PRCM_CGATING_BYPASS);
+ writel(val | PRCM_CGATING_BYPASS_ICN2, PRCM_CGATING_BYPASS);
+ }
+
+ ret = request_clock(clock, enable);
+
+ if (!ret && !enable) {
+ val = readl(PRCM_CGATING_BYPASS);
+ writel(val & ~PRCM_CGATING_BYPASS_ICN2, PRCM_CGATING_BYPASS);
+ }
+
+ return ret;
+}
+
+static inline bool plldsi_tv_locked(void)
+{
+ return (readl(PRCM_PLLDSITV_LOCKP) &
+ (PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP10 |
+ PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP3)) ==
+ (PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP10 |
+ PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP3);
+}
+
+static inline bool plldsi_lcd_locked(void)
+{
+ return (readl(PRCM_PLLDSILCD_LOCKP) &
+ (PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP10 |
+ PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP3)) ==
+ (PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP10 |
+ PRCM_PLLDSI_LOCKP_PRCM_PLLDSI_LOCKP3);
+}
+
+static int request_plldsi(bool enable, bool lcd)
+{
+ int r = 0;
+ u32 val;
+ void __iomem *pll_dsi_enable_reg;
+ u32 pll_dsi_resetn_bit;
+ bool (*plldsi_locked)(void);
+
+ if (lcd) {
+ pll_dsi_enable_reg = PRCM_PLLDSILCD_ENABLE;
+ pll_dsi_resetn_bit = PRCM_APE_RESETN_DSIPLL_LCD_RESETN;
+ plldsi_locked = plldsi_lcd_locked;
+ } else {
+ pll_dsi_enable_reg = PRCM_PLLDSITV_ENABLE;
+ pll_dsi_resetn_bit = PRCM_APE_RESETN_DSIPLL_TV_RESETN;
+ plldsi_locked = plldsi_tv_locked;
+ }
+
+ if (enable) {
+ /* Only clamp for enable if both are unlocked */
+ if (!plldsi_lcd_locked() && !plldsi_tv_locked())
+ writel((PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMP |
+ PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMPI),
+ PRCM_MMIP_LS_CLAMP_CLR);
+ } else {
+ /* Only clamp for disable if one are locked */
+ bool tv_locked = plldsi_tv_locked();
+ bool lcd_locked = plldsi_lcd_locked();
+ if ((!lcd_locked && tv_locked) || (lcd_locked && !tv_locked))
+ writel((PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMP |
+ PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMPI),
+ PRCM_MMIP_LS_CLAMP_SET);
+ }
+
+ val = readl(pll_dsi_enable_reg);
+ if (enable)
+ val |= PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE;
+ else
+ val &= ~PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE;
+ writel(val, pll_dsi_enable_reg);
+
+ if (enable) {
+ unsigned int i;
+ bool locked = plldsi_locked();
+
+ for (i = 10; !locked && (i > 0); --i) {
+ udelay(100);
+ locked = plldsi_locked();
+ }
+ if (locked) {
+ writel(pll_dsi_resetn_bit,
+ PRCM_APE_RESETN_SET);
+ } else {
+ writel((PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMP |
+ PRCM_MMIP_LS_CLAMP_DSIPLL_CLAMPI),
+ PRCM_MMIP_LS_CLAMP_SET);
+ val &= ~PRCM_PLLDSI_ENABLE_PRCM_PLLDSI_ENABLE;
+ writel(val, pll_dsi_enable_reg);
+ r = -EAGAIN;
+ }
+ } else {
+ writel(pll_dsi_resetn_bit, PRCM_APE_RESETN_CLR);
+ }
+
+ return r;
+}
+
+#define NO_LCD false
+#define LCD true
+
+static int request_dsiclk(u8 n, bool enable, bool lcd)
+{
+ u32 val;
+ struct dsiclk *dsiclk;
+
+ dsiclk = u9540_dsiclk;
+
+ val = readl(PRCM_DSI_PLLOUT_SEL);
+ val &= ~dsiclk[n].divsel_mask;
+ val |= ((enable ? dsiclk[n].divsel : PRCM_DSI_PLLOUT_SEL_OFF) <<
+ dsiclk[n].divsel_shift);
+ if (lcd)
+ val |= dsiclk[n].divsel_lcd_mask;
+ writel(val, PRCM_DSI_PLLOUT_SEL);
+ return 0;
+}
+
+static int request_dsiescclk(u8 n, bool enable)
+{
+ u32 val;
+
+ val = readl(PRCM_DSITVCLK_DIV);
+ enable ? (val |= dsiescclk[n].en) : (val &= ~dsiescclk[n].en);
+ writel(val, PRCM_DSITVCLK_DIV);
+ return 0;
+}
+
+/**
+ * dbx540_request_clock() - Request for a clock to be enabled or disabled.
+ * @clock: The clock for which the request is made.
+ * @enable: Whether the clock should be enabled (true) or disabled (false).
+ *
+ * This function should only be used by the clock implementation.
+ * Do not use it from any other place!
+ */
+static int dbx540_prcmu_request_clock(u8 clock, bool enable)
+{
+ if (clock == PRCMU_SGACLK)
+ return request_sga_clock(clock, enable);
+ else if (clock < PRCMU_NUM_REG_CLOCKS)
+ return request_clock(clock, enable);
+ else if (clock == PRCMU_TIMCLK)
+ return request_timclk(enable);
+ else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
+ return request_dsiclk((clock - PRCMU_DSI0CLK), enable, NO_LCD);
+ else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK))
+ return request_dsiescclk((clock - PRCMU_DSI0ESCCLK), enable);
+ else if (clock == PRCMU_PLLDSI)
+ return request_plldsi(enable, false);
+ else if ((clock == PRCMU_DSI0CLK_LCD) || (clock == PRCMU_DSI1CLK_LCD))
+ return request_dsiclk((clock - PRCMU_DSI0CLK_LCD),
+ enable, LCD);
+ else if (clock == PRCMU_PLLDSI_LCD)
+ return request_plldsi(enable, true);
+ else if (clock == PRCMU_SYSCLK)
+ return request_sysclk(enable);
+ else if ((clock == PRCMU_PLLSOC0) || (clock == PRCMU_PLLSOC1))
+ return request_pll(clock, enable);
+ else
+ return -EINVAL;
+}
+
+static unsigned long pll_rate(void __iomem *reg, unsigned long src_rate,
+ int branch)
+{
+ u64 rate;
+ u32 val;
+ u32 d;
+ u32 div = 1;
+
+ val = readl(reg);
+
+ rate = src_rate;
+ rate *= ((val & PRCM_PLL_FREQ_D_MASK) >> PRCM_PLL_FREQ_D_SHIFT);
+
+ d = ((val & PRCM_PLL_FREQ_N_MASK) >> PRCM_PLL_FREQ_N_SHIFT);
+ if (d > 1)
+ div *= d;
+
+ d = ((val & PRCM_PLL_FREQ_R_MASK) >> PRCM_PLL_FREQ_R_SHIFT);
+ if (d > 1)
+ div *= d;
+
+ if (val & PRCM_PLL_FREQ_SELDIV2)
+ div *= 2;
+
+ if ((branch == PLL_FIX) || ((branch == PLL_DIV) &&
+ (val & PRCM_PLL_FREQ_DIV2EN) &&
+ ((reg == PRCM_PLLSOC0_FREQ) ||
+ (reg == PRCM_PLLDDR_FREQ))))
+ div *= 2;
+
+ (void)do_div(rate, div);
+
+ return (unsigned long)rate;
+}
+
+#define ROOT_CLOCK_RATE 38400000
+
+static unsigned long clock_rate(u8 clock)
+{
+ u32 val;
+ u32 pllsw;
+ unsigned long rate = ROOT_CLOCK_RATE;
+
+ val = readl(clk_mgt[clock].reg);
+
+ if (val & PRCM_CLK_MGT_CLK38) {
+ if (clk_mgt[clock].clk38div && (val & PRCM_CLK_MGT_CLK38DIV))
+ rate /= 2;
+ return rate;
+ }
+
+ val |= clk_mgt[clock].pllsw;
+ pllsw = (val & PRCM_CLK_MGT_CLKPLLSW_MASK);
+
+ if (pllsw == PRCM_CLK_MGT_CLKPLLSW_SOC0)
+ rate = pll_rate(PRCM_PLLSOC0_FREQ, rate, clk_mgt[clock].branch);
+ else if (pllsw == PRCM_CLK_MGT_CLKPLLSW_SOC1)
+ rate = pll_rate(PRCM_PLLSOC1_FREQ, rate, clk_mgt[clock].branch);
+ else if (pllsw == PRCM_CLK_MGT_CLKPLLSW_DDR)
+ rate = pll_rate(PRCM_PLLDDR_FREQ, rate, clk_mgt[clock].branch);
+ else
+ return 0;
+
+ if ((clock == PRCMU_SGACLK) &&
+ (val & PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN)) {
+ u64 r = (rate * 10);
+
+ (void)do_div(r, 25);
+ return (unsigned long)r;
+ }
+ val &= PRCM_CLK_MGT_CLKPLLDIV_MASK;
+ if (val)
+ return rate / val;
+ else
+ return 0;
+}
+
+static unsigned long armss_rate(void)
+{
+ return latest_armss_rate;
+}
+
+static unsigned long dsiclk_rate(u8 n, bool lcd)
+{
+ u32 divsel;
+ u32 div = 1;
+ struct dsiclk *dsiclk;
+
+ dsiclk = u9540_dsiclk;
+
+ divsel = readl(PRCM_DSI_PLLOUT_SEL);
+ divsel = ((divsel & dsiclk[n].divsel_mask) >> dsiclk[n].divsel_shift);
+
+ if (divsel == PRCM_DSI_PLLOUT_SEL_OFF)
+ divsel = dsiclk[n].divsel;
+
+ switch (divsel) {
+ case PRCM_DSI_PLLOUT_SEL_PHI_4:
+ div *= 2;
+ case PRCM_DSI_PLLOUT_SEL_PHI_2:
+ div *= 2;
+ case PRCM_DSI_PLLOUT_SEL_PHI:
+ if (lcd)
+ return pll_rate(PRCM_PLLDSILCD_FREQ,
+ clock_rate(PRCMU_SPARE1CLK), PLL_RAW) / div;
+ else
+ return pll_rate(PRCM_PLLDSITV_FREQ,
+ clock_rate(PRCMU_HDMICLK), PLL_RAW) / div;
+ default:
+ return 0;
+ }
+}
+
+static unsigned long dsiescclk_rate(u8 n)
+{
+ u32 div;
+
+ div = readl(PRCM_DSITVCLK_DIV);
+ div = ((div & dsiescclk[n].div_mask) >> (dsiescclk[n].div_shift));
+ return clock_rate(PRCMU_TVCLK) / max((u32)1, div);
+}
+
+static unsigned long dbx540_prcmu_clock_rate(u8 clock)
+{
+ if (clock < PRCMU_NUM_REG_CLOCKS)
+ return clock_rate(clock);
+ else if (clock == PRCMU_TIMCLK)
+ return ROOT_CLOCK_RATE / 16;
+ else if (clock == PRCMU_SYSCLK)
+ return ROOT_CLOCK_RATE;
+ else if (clock == PRCMU_PLLSOC0)
+ return pll_rate(PRCM_PLLSOC0_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
+ else if (clock == PRCMU_PLLSOC1)
+ return pll_rate(PRCM_PLLSOC1_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
+ else if (clock == PRCMU_PLLDDR)
+ return pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, PLL_RAW);
+ else if (clock == PRCMU_PLLDSI)
+ return pll_rate(PRCM_PLLDSITV_FREQ, clock_rate(PRCMU_HDMICLK),
+ PLL_RAW);
+ else if (clock == PRCMU_ARMSS)
+ return KHZ_TO_HZ(armss_rate());
+ else if (clock == PRCMU_ARMCLK)
+ return KHZ_TO_HZ(get_arm_freq());
+ else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
+ return dsiclk_rate(clock - PRCMU_DSI0CLK, false);
+ else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK))
+ return dsiescclk_rate(clock - PRCMU_DSI0ESCCLK);
+ else if (clock == PRCMU_PLLDSI_LCD)
+ return pll_rate(PRCM_PLLDSILCD_FREQ,
+ clock_rate(PRCMU_SPARE1CLK), PLL_RAW);
+ else if ((clock == PRCMU_DSI0CLK_LCD) || (clock == PRCMU_DSI1CLK_LCD))
+ return dsiclk_rate(clock - PRCMU_DSI0CLK_LCD, true);
+ else
+ return 0;
+}
+
+static unsigned long clock_source_rate(u32 clk_mgt_val, int branch)
+{
+ if (clk_mgt_val & PRCM_CLK_MGT_CLK38)
+ return ROOT_CLOCK_RATE;
+ clk_mgt_val &= PRCM_CLK_MGT_CLKPLLSW_MASK;
+ if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_SOC0)
+ return pll_rate(PRCM_PLLSOC0_FREQ, ROOT_CLOCK_RATE, branch);
+ else if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_SOC1)
+ return pll_rate(PRCM_PLLSOC1_FREQ, ROOT_CLOCK_RATE, branch);
+ else if (clk_mgt_val == PRCM_CLK_MGT_CLKPLLSW_DDR)
+ return pll_rate(PRCM_PLLDDR_FREQ, ROOT_CLOCK_RATE, branch);
+ else
+ return 0;
+}
+
+static u32 clock_divider(unsigned long src_rate, unsigned long rate)
+{
+ u32 div;
+
+ div = (src_rate / rate);
+ if (div == 0)
+ return 1;
+ if (rate < (src_rate / div))
+ div++;
+ return div;
+}
+
+static long round_clock_rate(u8 clock, unsigned long rate)
+{
+ u32 val;
+ u32 div;
+ unsigned long src_rate;
+ long rounded_rate;
+
+ val = readl(clk_mgt[clock].reg);
+ src_rate = clock_source_rate((val | clk_mgt[clock].pllsw),
+ clk_mgt[clock].branch);
+ div = clock_divider(src_rate, rate);
+ if (val & PRCM_CLK_MGT_CLK38) {
+ if (clk_mgt[clock].clk38div) {
+ if (div > 2)
+ div = 2;
+ } else {
+ div = 1;
+ }
+ } else if ((clock == PRCMU_SGACLK) && (div == 3)) {
+ u64 r = (src_rate * 10);
+
+ (void)do_div(r, 25);
+ if (r <= rate)
+ return (unsigned long)r;
+ }
+ rounded_rate = (src_rate / min(div, (u32)31));
+
+ return rounded_rate;
+}
+
+#define MIN_PLL_VCO_RATE 600000000ULL
+#define MAX_PLL_VCO_RATE 2000000000ULL
+
+static long round_plldsi_rate(unsigned long rate)
+{
+ long rounded_rate = 0;
+ unsigned long src_rate;
+ unsigned long rem;
+ u32 r;
+
+ src_rate = clock_rate(PRCMU_HDMICLK);
+ rem = rate;
+
+ for (r = 7; (rem > 0) && (r > 0); r--) {
+ u64 d;
+
+ d = (r * rate);
+ (void)do_div(d, src_rate);
+ if (d < 6)
+ d = 6;
+ else if (d > 255)
+ d = 255;
+ d *= src_rate;
+ if (((2 * d) < (r * MIN_PLL_VCO_RATE)) ||
+ ((r * MAX_PLL_VCO_RATE) < (2 * d)))
+ continue;
+ (void)do_div(d, r);
+ if (rate < d) {
+ if (rounded_rate == 0)
+ rounded_rate = (long)d;
+ break;
+ }
+ if ((rate - d) < rem) {
+ rem = (rate - d);
+ rounded_rate = (long)d;
+ }
+ }
+ return rounded_rate;
+}
+
+static long round_dsiclk_rate(unsigned long rate, bool lcd)
+{
+ u32 div;
+ unsigned long src_rate;
+ long rounded_rate;
+
+ if (lcd)
+ src_rate = pll_rate(PRCM_PLLDSILCD_FREQ,
+ clock_rate(PRCMU_SPARE1CLK), PLL_RAW);
+ else
+ src_rate = pll_rate(PRCM_PLLDSITV_FREQ,
+ clock_rate(PRCMU_HDMICLK), PLL_RAW);
+ div = clock_divider(src_rate, rate);
+ rounded_rate = (src_rate / ((div > 2) ? 4 : div));
+
+ return rounded_rate;
+}
+
+static long round_dsiescclk_rate(unsigned long rate)
+{
+ u32 div;
+ unsigned long src_rate;
+ long rounded_rate;
+
+ src_rate = clock_rate(PRCMU_TVCLK);
+ div = clock_divider(src_rate, rate);
+ rounded_rate = (src_rate / min(div, (u32)255));
+
+ return rounded_rate;
+}
+
+static long dbx540_prcmu_round_clock_rate(u8 clock, unsigned long rate)
+{
+ if (clock < PRCMU_NUM_REG_CLOCKS)
+ return round_clock_rate(clock, rate);
+ else if (clock == PRCMU_PLLDSI)
+ return round_plldsi_rate(rate);
+ else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
+ return round_dsiclk_rate(rate, false);
+ else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK))
+ return round_dsiescclk_rate(rate);
+ else if (clock == PRCMU_PLLDSI_LCD)
+ return round_plldsi_rate(rate);
+ else if ((clock == PRCMU_DSI0CLK_LCD) || (clock == PRCMU_DSI1CLK_LCD))
+ return round_dsiclk_rate(rate, true);
+ else
+ return (long)prcmu_clock_rate(clock);
+}
+
+static void set_clock_rate(u8 clock, unsigned long rate)
+{
+ u32 val;
+ u32 div;
+ unsigned long src_rate;
+ unsigned long flags;
+
+ spin_lock_irqsave(&clk_mgt_lock, flags);
+
+ /* Grab the HW semaphore. */
+ while ((readl(PRCM_SEM) & PRCM_SEM_PRCM_SEM) != 0)
+ cpu_relax();
+
+ val = readl(clk_mgt[clock].reg);
+ src_rate = clock_source_rate((val | clk_mgt[clock].pllsw),
+ clk_mgt[clock].branch);
+ div = clock_divider(src_rate, rate);
+ if (val & PRCM_CLK_MGT_CLK38) {
+ if (clk_mgt[clock].clk38div) {
+ if (div > 1)
+ val |= PRCM_CLK_MGT_CLK38DIV;
+ else
+ val &= ~PRCM_CLK_MGT_CLK38DIV;
+ }
+ } else if (clock == PRCMU_SGACLK) {
+ val &= ~(PRCM_CLK_MGT_CLKPLLDIV_MASK |
+ PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN);
+ if (div == 3) {
+ u64 r = (src_rate * 10);
+
+ (void)do_div(r, 25);
+ if (r <= rate) {
+ val |= PRCM_SGACLK_MGT_SGACLKDIV_BY_2_5_EN;
+ div = 0;
+ }
+ }
+ val |= min(div, (u32)31);
+ } else {
+ val &= ~PRCM_CLK_MGT_CLKPLLDIV_MASK;
+ val |= min(div, (u32)31);
+ }
+
+ writel(val, clk_mgt[clock].reg);
+
+ /* Release the HW semaphore. */
+ writel(0, PRCM_SEM);
+
+ spin_unlock_irqrestore(&clk_mgt_lock, flags);
+}
+
+static int set_plldsi_rate(unsigned long rate, bool lcd)
+{
+ unsigned long src_rate;
+ unsigned long rem;
+ u32 pll_freq = 0;
+ u32 r;
+
+ if (lcd)
+ src_rate = clock_rate(PRCMU_SPARE1CLK);
+ else
+ src_rate = clock_rate(PRCMU_HDMICLK);
+
+ rem = rate;
+
+ for (r = 7; (rem > 0) && (r > 0); r--) {
+ u64 d;
+ u64 hwrate;
+
+ d = (r * rate);
+ (void)do_div(d, src_rate);
+ if (d < 6)
+ d = 6;
+ else if (d > 255)
+ d = 255;
+ hwrate = (d * src_rate);
+ if (((2 * hwrate) < (r * MIN_PLL_VCO_RATE)) ||
+ ((r * MAX_PLL_VCO_RATE) < (2 * hwrate)))
+ continue;
+ (void)do_div(hwrate, r);
+ if (rate < hwrate) {
+ if (pll_freq == 0)
+ pll_freq = (((u32)d << PRCM_PLL_FREQ_D_SHIFT) |
+ (r << PRCM_PLL_FREQ_R_SHIFT));
+ break;
+ }
+ if ((rate - hwrate) < rem) {
+ rem = (rate - hwrate);
+ pll_freq = (((u32)d << PRCM_PLL_FREQ_D_SHIFT) |
+ (r << PRCM_PLL_FREQ_R_SHIFT));
+ }
+ }
+ if (pll_freq == 0)
+ return -EINVAL;
+
+ pll_freq |= (1 << PRCM_PLL_FREQ_N_SHIFT);
+ writel(pll_freq, lcd ? PRCM_PLLDSILCD_FREQ : PRCM_PLLDSITV_FREQ);
+
+ return 0;
+}
+
+static void set_dsiclk_rate(u8 n, unsigned long rate, bool lcd)
+{
+ unsigned long src_rate;
+ u32 val;
+ u32 div;
+ struct dsiclk *dsiclk;
+
+ dsiclk = u9540_dsiclk;
+
+ if (lcd)
+ src_rate = clock_rate(PRCMU_SPARE1CLK);
+ else
+ src_rate = clock_rate(PRCMU_HDMICLK);
+
+ div = clock_divider(pll_rate(
+ lcd ? PRCM_PLLDSILCD_FREQ : PRCM_PLLDSITV_FREQ,
+ src_rate, PLL_RAW), rate);
+
+ dsiclk[n].divsel = (div == 1) ? PRCM_DSI_PLLOUT_SEL_PHI :
+ (div == 2) ? PRCM_DSI_PLLOUT_SEL_PHI_2 :
+ /* else */ PRCM_DSI_PLLOUT_SEL_PHI_4;
+
+ val = readl(PRCM_DSI_PLLOUT_SEL);
+ val &= ~dsiclk[n].divsel_mask;
+ val |= (dsiclk[n].divsel << dsiclk[n].divsel_shift);
+ if (lcd)
+ val |= dsiclk[n].divsel_lcd_mask;
+ writel(val, PRCM_DSI_PLLOUT_SEL);
+}
+
+static void set_dsiescclk_rate(u8 n, unsigned long rate)
+{
+ u32 val;
+ u32 div;
+
+ div = clock_divider(clock_rate(PRCMU_TVCLK), rate);
+ val = readl(PRCM_DSITVCLK_DIV);
+ val &= ~dsiescclk[n].div_mask;
+ val |= (min(div, (u32)255) << dsiescclk[n].div_shift);
+ writel(val, PRCM_DSITVCLK_DIV);
+}
+
+static int dbx540_prcmu_set_clock_rate(u8 clock, unsigned long rate)
+{
+ if (clock < PRCMU_NUM_REG_CLOCKS)
+ set_clock_rate(clock, rate);
+ else if (clock == PRCMU_PLLDSI)
+ return set_plldsi_rate(rate, false);
+ else if (clock == PRCMU_ARMCLK)
+ return set_arm_freq(HZ_TO_KHZ(rate));
+ else if ((clock == PRCMU_DSI0CLK) || (clock == PRCMU_DSI1CLK))
+ set_dsiclk_rate((clock - PRCMU_DSI0CLK), rate, false);
+ else if ((PRCMU_DSI0ESCCLK <= clock) && (clock <= PRCMU_DSI2ESCCLK))
+ set_dsiescclk_rate((clock - PRCMU_DSI0ESCCLK), rate);
+ else if (clock == PRCMU_PLLDSI_LCD)
+ return set_plldsi_rate(rate, true);
+ else if ((clock == PRCMU_DSI0CLK_LCD) || (clock == PRCMU_DSI1CLK_LCD))
+ set_dsiclk_rate((clock - PRCMU_DSI0CLK_LCD), rate, true);
+
+ return 0;
+}
+
+static int config_esram0_deep_sleep(u8 state)
+{
+ return 0;
+}
+
+int prcmu_set_ddr_sleep_strat_policy(u8 ddr_ctrl_nb, u8 lp_mode,
+ u8 ddr_ctrl_mode)
+{
+ struct upap_req req;
+ struct upap_ack ack;
+ int r = 0;
+
+ if ((ddr_ctrl_nb > DDR_SLEEP_STRAT_DDRCTRL1) ||
+ (ddr_ctrl_nb < DDR_SLEEP_STRAT_DDRCTRL0))
+ goto error;
+ if ((lp_mode > DDR_SLEEP_STRAT_AP_SLEEP_INDEX) ||
+ (ddr_ctrl_nb < DDR_SLEEP_STRAT_AP_IDLE_INDEX))
+ goto error;
+ if ((ddr_ctrl_mode > DDRCTRLSTATE_ON) ||
+ (ddr_ctrl_mode < DDRCTRLSTATE_OFFHIGHLAT))
+ goto error;
+
+ /* Set policy for DDRCtrlNb[cs0] */
+ ddr_sleep_strat_policy[lp_mode][ddr_ctrl_nb] = ddr_ctrl_mode;
+
+ /* Write to TCDM (header and data, then req_state) */
+ req.service_id = U9540_PRCM_UPAP_SERVICE_DDR;
+ req.command_id = U9540_PRCM_UPAP_COMMAND_DDR_SLEEP_STRAT;
+ memcpy(req.data.full_data_buf, ddr_sleep_strat_policy,
+ sizeof(ddr_sleep_strat_policy));
+ req.req_state = U9540_PRCM_UPAP_REQ_STATE_REQ_SENT;
+
+ upap_send_request(&req, &ack, sizeof(ddr_sleep_strat_policy));
+
+ return r;
+
+error:
+ return -EINVAL;
+}
+
+static bool is_ac_wake_requested(void)
+{
+ return (atomic_read(&ac_wake_req_state) != 0);
+}
+
+void prcmu_reset_hva(void)
+{
+ writel(PRCM_C2C_RESETN_HVA_MEM | PRCM_C2C_RESETN_HVA_LOGIC,
+ PRCM_C2C_RESETN_CLR);
+ writel(PRCM_C2C_RESETN_HVA_MEM | PRCM_C2C_RESETN_HVA_LOGIC,
+ PRCM_C2C_RESETN_SET);
+}
+EXPORT_SYMBOL(prcmu_reset_hva);
+
+void prcmu_reset_hx170(void)
+{
+ writel(PRCM_C2C_RESETN_G1_MEM | PRCM_C2C_RESETN_G1_LOGIC,
+ PRCM_C2C_RESETN_CLR);
+ writel(PRCM_C2C_RESETN_G1_MEM | PRCM_C2C_RESETN_G1_LOGIC,
+ PRCM_C2C_RESETN_SET);
+}
+EXPORT_SYMBOL(prcmu_reset_hx170);
+
+/**
+ * get_reset_code - Retrieve SW reset reason code
+ *
+ * Retrieves the reset reason code stored by prcmu_system_reset() before
+ * last restart.
+ */
+static u16 get_reset_code(void)
+{
+ return reset_code_copy;
+}
+
+/**
+ * get_reset_status - Retrieve reset status
+ *
+ * Retrieves the value of the reset status register as read at startup.
+ */
+u32 get_reset_status(void)
+{
+ return reset_status_copy;
+}
+
+static void prcmu_modem_reset_db9540(void)
+{
+ struct upap_req req;
+ struct upap_ack ack;
+
+ /* prepare request */
+ req.service_id = U9540_PRCM_UPAP_SERVICE_MODEM;
+ req.command_id = U9540_PRCM_UPAP_COMMAND_RESET_MODEM;
+ req.req_state = U9540_PRCM_UPAP_REQ_STATE_REQ_SENT;
+
+ upap_send_request(&req, &ack, 0);
+
+ /*
+ * No need to check return from PRCMU as modem should go in reset state
+ * This state is already managed by upper layer
+ */
+}
+
+/**
+ * prcmu_reset_modem - ask the PRCMU to reset modem
+ */
+void modem_reset(void)
+{
+ prcmu_modem_reset_db9540();
+}
+
+static inline void print_unknown_header_warning(u8 n, u8 header)
+{
+ pr_warning("prcmu: Unknown message header (%d) in mailbox %d.\n",
+ header, n);
+}
+
+static void upap_print_unknown_header_warning(
+ u32 service, u32 command, u32 status)
+{
+ pr_warning("prcmu: Unknown service (%u) and command (%u) in UniqPAP."
+ "Returned status (%u)\n",
+ service, command, status);
+}
+
+static void upap_read_service_dvfs(struct upap_req *req,
+ struct upap_ack *ack)
+{
+ switch (ack->command_id) {
+ case U9540_PRCM_UPAP_COMMAND_SET_ARM_OPP:
+ ack->arm_freq = req->data.data;
+ break;
+
+ case U9540_PRCM_UPAP_COMMAND_SET_APE_OPP:
+ /* No response data for this service ID and command ID. */
+ break;
+
+ case U9540_PRCM_UPAP_COMMAND_SET_SAFE_OPP:
+ /* No response data for this service ID and command ID. */
+ break;
+
+ default:
+ upap_print_unknown_header_warning(ack->service_id,
+ ack->command_id, ack->status);
+ break;
+ }
+}
+
+static void upap_read_service_usb(struct upap_req *req,
+ struct upap_ack *ack)
+{
+ /* No response data for this service ID. Just check command ID is OK */
+ if (unlikely(ack->command_id != U9540_PRCM_UPAP_COMMAND_USB_WAKEUP_REL))
+ upap_print_unknown_header_warning(ack->service_id,
+ ack->command_id, ack->status);
+}
+
+static void upap_read_service_clock(struct upap_req *req,
+ struct upap_ack *ack)
+{
+ /* No response data for this service ID. Just check command ID is OK */
+ if (unlikely(ack->command_id != U9540_PRCM_UPAP_COMMAND_PLL_ON_OFF))
+ upap_print_unknown_header_warning(ack->service_id,
+ ack->command_id, ack->status);
+}
+
+static void upap_read_service_modem(struct upap_req *req,
+ struct upap_ack *ack)
+{
+ /* No response data for this service ID. Just check command ID is OK */
+ if (unlikely(ack->command_id != U9540_PRCM_UPAP_COMMAND_RESET_MODEM))
+ upap_print_unknown_header_warning(ack->service_id,
+ ack->command_id, ack->status);
+}
+
+static void upap_read_service_cpuhotplug(struct upap_req *req,
+ struct upap_ack *ack)
+{
+ /* No response data for this service ID. Just check command ID is OK */
+ if (unlikely((ack->command_id != U9540_PRCM_UPAP_COMMAND_CPU1_UNPLUG) &&
+ (ack->command_id != U9540_PRCM_UPAP_COMMAND_CPU1_REPLUG)
+ ))
+ upap_print_unknown_header_warning(ack->service_id,
+ ack->command_id, ack->status);
+}
+
+static void upap_read_service_ddr(struct upap_req *req,
+ struct upap_ack *ack)
+{
+ /* No response data for this service ID. Just check command ID is OK */
+ if (unlikely(ack->command_id !=
+ U9540_PRCM_UPAP_COMMAND_DDR_SLEEP_STRAT))
+ upap_print_unknown_header_warning(ack->service_id,
+ ack->command_id, ack->status);
+}
+
+static void upap_read_service_thsensor(struct upap_req *req,
+ struct upap_ack *ack)
+{
+ switch (ack->command_id) {
+ case U9540_PRCM_UPAP_COMMAND_THSENSOR_GET_TEMP:
+ ack->sensor_read = req->data.data;
+ break;
+
+ default:
+ upap_print_unknown_header_warning(ack->service_id,
+ ack->command_id, ack->status);
+ break;
+ }
+}
+
+static void upap_read_ack(struct upap_req *req)
+{
+ struct upap_ack *ack = upap_transfer.ack;
+
+ ack->service_id = req->service_id;
+ ack->command_id = req->command_id;
+ ack->status = req->status;
+
+ if ((ack->service_id < UPAP_SERVICES_NB) &&
+ (upap_read_services[ack->service_id] != NULL))
+ upap_read_services[ack->service_id](req, ack);
+ else
+ upap_print_unknown_header_warning(ack->service_id,
+ ack->command_id, ack->status);
+
+ /* Update mailbox state */
+ req->req_state = U9540_PRCM_UPAP_REQ_STATE_REQ_IDLE;
+
+ complete(&upap_transfer.work);
+}
+
+static void upap_read_nfy(struct upap_nfy *nfy)
+{
+ switch (nfy->service_id) {
+#ifdef CONFIG_C2C
+ case U9540_PRCM_UPAP_SERVICE_C2C:
+ upap_read_nfy_service_c2c(nfy);
+ break;
+#endif
+ default:
+ pr_warning("prcmu: Unknown notif service %u / cmd %u in MB1\n",
+ nfy->service_id, nfy->command_id);
+ }
+ /* Update mailbox state */
+ nfy->nfy_state = U9540_PRCM_UPAP_NFY_STATE_IDLE;
+}
+
+static bool upap_handler(void)
+{
+ /* ack interuption */
+ writel(MBOX_BIT(upap_conf.mbox_nb), PRCM_ARM_IT1_CLR);
+
+ if (upap_conf.req->req_state == U9540_PRCM_UPAP_REQ_STATE_ACK_SENT)
+ upap_read_ack(upap_conf.req);
+
+ if (upap_conf.nfy->nfy_state == U9540_PRCM_UPAP_NFY_STATE_SENT)
+ upap_read_nfy(upap_conf.nfy);
+
+ return false;
+}
+
+static bool (*dbx540_read_mailbox[NUM_MB])(void) = {
+ db8500_prcmu_read_mailbox_0,
+ upap_handler,
+ db8500_prcmu_read_mailbox_2,
+ db8500_prcmu_read_mailbox_3,
+ db8500_prcmu_read_mailbox_4,
+ db8500_prcmu_read_mailbox_5,
+ db8500_prcmu_read_mailbox_6,
+ db8500_prcmu_read_mailbox_7
+};
+
+static struct prcmu_val_data val_tab[] = {
+ {
+ .val = APE_OPP,
+ .set_val = set_ape_opp,
+ .get_val = get_ape_opp,
+ },
+ {
+ .val = DDR_OPP,
+ .set_val = set_ddr_opp,
+ .get_val = get_ddr_opp,
+ },
+};
+
+static struct prcmu_out_data out_tab[] = {
+ {
+ .out = SPI2_MUX,
+ .enable = db8500_prcmu_enable_spi2,
+ .disable = db8500_prcmu_disable_spi2,
+ },
+ {
+ .out = STM_APE_MUX,
+ .enable = db8500_prcmu_enable_stm_ape,
+ .disable = db8500_prcmu_disable_stm_ape,
+ },
+ {
+ .out = STM_MOD_UART_MUX,
+ .enable = db8500_prcmu_enable_stm_mod_uart,
+ .disable = db8500_prcmu_disable_stm_mod_uart,
+ }
+};
+
+static struct prcmu_early_data early_fops = {
+ /* system reset */
+ .system_reset = db8500_prcmu_system_reset,
+
+ /* clock service */
+ .config_clkout = config_clkout,
+ .request_clock = dbx540_prcmu_request_clock,
+
+ /* direct register access */
+ .read = db8500_prcmu_read,
+ .write = db8500_prcmu_write,
+ .write_masked = db8500_prcmu_write_masked,
+ /* others */
+ .round_clock_rate = dbx540_prcmu_round_clock_rate,
+ .set_clock_rate = dbx540_prcmu_set_clock_rate,
+ .clock_rate = dbx540_prcmu_clock_rate,
+ .get_fw_version = get_fw_version,
+ .has_arm_maxopp = has_arm_maxopp,
+};
+
+static struct prcmu_fops_register early_tab[] = {
+ {
+ .fops = PRCMU_EARLY,
+ .data.pearly = &early_fops
+ },
+ {
+ .fops = PRCMU_VAL,
+ .size = ARRAY_SIZE(val_tab),
+ .data.pval = val_tab
+ },
+ {
+ .fops = PRCMU_OUT,
+ .size = ARRAY_SIZE(out_tab),
+ .data.pout = out_tab
+ }
+};
+
+static struct prcmu_fops_register_data early_data = {
+ .size = ARRAY_SIZE(early_tab),
+ .tab = early_tab
+};
+
+struct prcmu_probe_data probe_fops = {
+ /* sysfs soc inf */
+ .get_reset_code = get_reset_code,
+
+ /* pm/suspend.c/cpu freq */
+ .config_esram0_deep_sleep = config_esram0_deep_sleep,
+ .set_power_state = db8500_prcmu_set_power_state,
+ .get_power_state_result = db8500_prcmu_get_power_state_result,
+ .enable_wakeups = db8500_prcmu_enable_wakeups,
+ .is_ac_wake_requested = is_ac_wake_requested,
+
+ /* modem */
+ .modem_reset = modem_reset,
+
+ /* no used at all */
+ .config_abb_event_readout = db8500_prcmu_config_abb_event_readout,
+ .get_abb_event_buffer = db8500_prcmu_get_abb_event_buffer,
+
+ /* abb access */
+ .abb_read = db8500_prcmu_abb_read,
+ .abb_write = db8500_prcmu_abb_write,
+ .get_reset_status = get_reset_status,
+ /* other u8500 specific */
+ .request_ape_opp_100_voltage = request_ape_opp_100_voltage,
+ .configure_auto_pm = db8500_prcmu_configure_auto_pm,
+ .set_epod = db8500_prcmu_set_epod,
+
+ /* abb specific access */
+ .abb_write_masked = db8500_prcmu_abb_write_masked,
+
+ /* watchdog */
+ .config_a9wdog = db8500_prcmu_config_a9wdog,
+ .enable_a9wdog = db8500_prcmu_enable_a9wdog,
+ .disable_a9wdog = db8500_prcmu_disable_a9wdog,
+ .kick_a9wdog = db8500_prcmu_kick_a9wdog,
+ .load_a9wdog = db8500_prcmu_load_a9wdog,
+};
+
+struct prcmu_probe_cpuhp_data probe_cpuhp_fops = {
+
+ .stay_in_wfi_check = stay_in_wfi_check,
+ .replug_cpu1 = replug_cpu1,
+ .unplug_cpu1 = unplug_cpu1,
+};
+
+static struct prcmu_fops_register probe_tab[] = {
+ {
+ .fops = PRCMU_PROBE,
+ .data.pprobe = &probe_fops,
+ },
+ {
+ .fops = PRCMU_PROBE_CPU_HP,
+ .data.pprobe_cpuhp =&probe_cpuhp_fops,
+ },
+};
+
+struct prcmu_fops_register_data probe_data = {
+ .size = ARRAY_SIZE(probe_tab),
+ .tab = probe_tab,
+};
+
+struct prcmu_fops_register_data *__init
+ dbx540_prcmu_early_init(struct prcmu_tcdm_map *map)
+{
+ void *tcpm_base = ioremap_nocache(U8500_PRCMU_TCPM_BASE, SZ_4K);
+ struct prcmu_context context;
+
+ if (tcpm_base != NULL) {
+ u32 version;
+ version = readl(tcpm_base + PRCMU_FW_VERSION_OFFSET + 4);
+ fw_info.version.project = version & 0xFF;
+ fw_info.version.api_version = (version >> 8) & 0xFF;
+ fw_info.version.func_version = (version >> 16) & 0xFF;
+ fw_info.version.errata = (version >> 24) & 0xFF;
+ fw_info.valid = true;
+ pr_info("PRCMU firmware: %s(%d), version %d.%d.%d\n",
+ fw_project_name(fw_info.version.project<<8),
+ fw_info.version.project,
+ fw_info.version.api_version,
+ fw_info.version.func_version,
+ fw_info.version.errata);
+ iounmap(tcpm_base);
+ }
+
+ tcdm_base = ioremap_nocache(U8500_PRCMU_TCDM_BASE, map->tcdm_size);
+ context.tcdm_base = tcdm_base;
+ tcdm_legacy_base = context.tcdm_base + map->legacy_offset;
+ context.tcdm_legacy_base = tcdm_legacy_base;
+
+ /* read curent max opp counter */
+ arm_max_opp_profile.max_opp_cnt =
+ arm_max_opp_profile.secure_memory;
+ /*
+ * Copy the value of the reset status register and if needed also
+ * the software reset code.
+ */
+ reset_code_copy = readw(context.tcdm_legacy_base + PRCM_SW_RST_REASON);
+
+ context.fw_trans = dbx540_fw_trans;
+ context.fw_trans_nb = ARRAY_SIZE(dbx540_fw_trans);
+ context.read_mbox = dbx540_read_mailbox;
+ db8500_prcmu_context_init(&context);
+
+ db8500_prcmu_init_mb0(&mb0);
+ /* mailbox 1 used by UniqPAP */
+ db8500_prcmu_init_mb2(&mb2);
+ db8500_prcmu_init_mb3(&mb3);
+ db8500_prcmu_init_mb4(&mb4);
+ db8500_prcmu_init_mb5(&mb5);
+
+ /* initialize UniqPAP */
+ upap_init();
+ /* register UniqPAP services */
+ upap_register_ack_service(U9540_PRCM_UPAP_SERVICE_DVFS,
+ upap_read_service_dvfs);
+ upap_register_ack_service(U9540_PRCM_UPAP_SERVICE_USB,
+ upap_read_service_usb);
+ upap_register_ack_service(U9540_PRCM_UPAP_SERVICE_CLOCK,
+ upap_read_service_clock);
+ upap_register_ack_service(U9540_PRCM_UPAP_SERVICE_MODEM,
+ upap_read_service_modem);
+ upap_register_ack_service(U9540_PRCM_UPAP_SERVICE_CPUHOTPLUG,
+ upap_read_service_cpuhotplug);
+ upap_register_ack_service(U9540_PRCM_UPAP_SERVICE_THSENSOR,
+ upap_read_service_thsensor);
+ upap_register_ack_service(U9540_PRCM_UPAP_SERVICE_DDR,
+ upap_read_service_ddr);
+
+ dvfs_context.ape_opp = APE_OPP_INIT;
+
+ /* fixed it according to soc settings knowledge */
+ latest_armss_rate = 1500000;
+ return &early_data;
+}
+
+static void __init init_prcm_registers(void)
+{
+ u32 val;
+
+ val = readl(PRCM_A9PL_FORCE_CLKEN);
+ val &= ~(PRCM_A9PL_FORCE_CLKEN_PRCM_A9PL_FORCE_CLKEN |
+ PRCM_A9PL_FORCE_CLKEN_PRCM_A9AXI_FORCE_CLKEN);
+ writel(val, (PRCM_A9PL_FORCE_CLKEN));
+}
+
+void prcmu_set_sdmmc_psw(bool status)
+{
+ u32 val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&spare_out_lock, flags);
+ val = readl(PRCM_SPARE_OUT);
+ if (status)
+ val |= PRCM_SPARE_OUT_PSW_SDMMC;
+ else
+ val &= ~PRCM_SPARE_OUT_PSW_SDMMC;
+ writel(val, PRCM_SPARE_OUT);
+ spin_unlock_irqrestore(&spare_out_lock, flags);
+}
+
+void prcmu_pullup_tdo(bool enable)
+{
+ u32 val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&prcmu_lock, flags);
+ val = readl(PRCM_IOCR);
+ if (enable)
+ val &= ~PRCM_IOCR_TDO_PULLUP_ENABLE;
+ else
+ val |= PRCM_IOCR_TDO_PULLUP_ENABLE;
+ writel(val, PRCM_IOCR);
+ spin_unlock_irqrestore(&prcmu_lock, flags);
+}
+
+/*
+ * Power domain switches (ePODs) modeled as regulators for the DB8500 SoC
+ */
+static struct regulator_consumer_supply db8500_vape_consumers[] = {
+ REGULATOR_SUPPLY("v-ape", NULL),
+ REGULATOR_SUPPLY("v-i2c", "nmk-i2c.0"),
+ REGULATOR_SUPPLY("v-i2c", "nmk-i2c.1"),
+ REGULATOR_SUPPLY("v-i2c", "nmk-i2c.2"),
+ REGULATOR_SUPPLY("v-i2c", "nmk-i2c.3"),
+ /* "v-mmc" changed to "vcore" in the mainline kernel */
+ REGULATOR_SUPPLY("vcore", "sdi0"),
+ REGULATOR_SUPPLY("vcore", "sdi1"),
+ REGULATOR_SUPPLY("vcore", "sdi2"),
+ REGULATOR_SUPPLY("vcore", "sdi3"),
+ REGULATOR_SUPPLY("vcore", "sdi4"),
+ REGULATOR_SUPPLY("v-dma", "dma40.0"),
+ REGULATOR_SUPPLY("v-ape", "ab8500-usb.0"),
+ REGULATOR_SUPPLY("v-uart", "uart0"),
+ REGULATOR_SUPPLY("v-uart", "uart1"),
+ REGULATOR_SUPPLY("v-uart", "uart2"),
+ REGULATOR_SUPPLY("v-ape", "nmk-ske-keypad.0"),
+ REGULATOR_SUPPLY("v-hsi", "ste_hsi.0"),
+};
+
+static struct regulator_consumer_supply db8500_vsmps2_consumers[] = {
+ REGULATOR_SUPPLY("musb_1v8", "ab9540-usb.0"),
+ REGULATOR_SUPPLY("musb_1v8", "ab8500-usb.0"),
+ /* AV8100 regulator */
+ REGULATOR_SUPPLY("hdmi_1v8", "0-0070"),
+};
+
+static struct regulator_consumer_supply db8500_b2r2_mcde_consumers[] = {
+ REGULATOR_SUPPLY("vsupply", "b2r2_core"),
+ REGULATOR_SUPPLY("vsupply", "b2r2_1_core"),
+ REGULATOR_SUPPLY("vsupply", "mcde"),
+ REGULATOR_SUPPLY("vsupply", "dsilink.0"),
+ REGULATOR_SUPPLY("vsupply", "dsilink.1"),
+ REGULATOR_SUPPLY("vsupply", "dsilink.2"),
+};
+
+/* SVA MMDSP regulator switch */
+static struct regulator_consumer_supply db8500_svammdsp_consumers[] = {
+ REGULATOR_SUPPLY("sva-mmdsp", "cm_control"),
+};
+
+/* SVA pipe regulator switch */
+static struct regulator_consumer_supply db8500_svapipe_consumers[] = {
+ REGULATOR_SUPPLY("sva-pipe", "cm_control"),
+ REGULATOR_SUPPLY("v-hva", NULL),
+ REGULATOR_SUPPLY("v-g1", NULL),
+};
+
+/* SIA MMDSP regulator switch */
+static struct regulator_consumer_supply db8500_siammdsp_consumers[] = {
+ REGULATOR_SUPPLY("sia-mmdsp", "cm_control"),
+};
+
+/* SIA pipe regulator switch */
+static struct regulator_consumer_supply db8500_siapipe_consumers[] = {
+ REGULATOR_SUPPLY("sia-pipe", "cm_control"),
+};
+
+static struct regulator_consumer_supply db8500_sga_consumers[] = {
+ REGULATOR_SUPPLY("v-mali", NULL),
+};
+
+static struct regulator_consumer_supply db8500_vpll_consumers[] = {
+ REGULATOR_SUPPLY("v-vpll", NULL),
+};
+
+/* ESRAM1 and 2 regulator switch */
+static struct regulator_consumer_supply db8500_esram12_consumers[] = {
+ REGULATOR_SUPPLY("esram12", "cm_control"),
+};
+
+/* ESRAM3 and 4 regulator switch */
+static struct regulator_consumer_supply db8500_esram34_consumers[] = {
+ REGULATOR_SUPPLY("v-esram34", "mcde"),
+ REGULATOR_SUPPLY("esram34", "cm_control"),
+ REGULATOR_SUPPLY("lcla_esram", "dma40.0"),
+};
+
+static struct regulator_init_data dbx540_regulators[DB8500_NUM_REGULATORS] = {
+ [DB8500_REGULATOR_VAPE] = {
+ .constraints = {
+ .name = "db8500-vape",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .consumer_supplies = db8500_vape_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(db8500_vape_consumers),
+ },
+ [DB8500_REGULATOR_VARM] = {
+ .constraints = {
+ .name = "db8500-varm",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+ [DB8500_REGULATOR_VMODEM] = {
+ .constraints = {
+ .name = "db8500-vmodem",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+ [DB8500_REGULATOR_VPLL] = {
+ .constraints = {
+ .name = "db8500-vpll",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .consumer_supplies = db8500_vpll_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(db8500_vpll_consumers),
+ },
+ [DB8500_REGULATOR_VSMPS1] = {
+ .constraints = {
+ .name = "db8500-vsmps1",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+ [DB8500_REGULATOR_VSMPS2] = {
+ .constraints = {
+ .name = "db8500-vsmps2",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .consumer_supplies = db8500_vsmps2_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(db8500_vsmps2_consumers),
+ },
+ [DB8500_REGULATOR_VSMPS3] = {
+ .constraints = {
+ .name = "db8500-vsmps3",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+ [DB8500_REGULATOR_VRF1] = {
+ .constraints = {
+ .name = "db8500-vrf1",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+ [DB8500_REGULATOR_SWITCH_SVAMMDSP] = {
+ /* dependency to u8500-vape is handled outside regulator framework */
+ .constraints = {
+ .name = "db8500-sva-mmdsp",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .consumer_supplies = db8500_svammdsp_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(db8500_svammdsp_consumers),
+ },
+ [DB8500_REGULATOR_SWITCH_SVAMMDSPRET] = {
+ .constraints = {
+ /* "ret" means "retention" */
+ .name = "db8500-sva-mmdsp-ret",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+ [DB8500_REGULATOR_SWITCH_SVAPIPE] = {
+ /* dependency to u8500-vape is handled outside regulator framework */
+ .constraints = {
+ .name = "db8500-sva-pipe",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .consumer_supplies = db8500_svapipe_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(db8500_svapipe_consumers),
+ },
+ [DB8500_REGULATOR_SWITCH_SIAMMDSP] = {
+ /* dependency to u8500-vape is handled outside regulator framework */
+ .constraints = {
+ .name = "db8500-sia-mmdsp",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .consumer_supplies = db8500_siammdsp_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(db8500_siammdsp_consumers),
+ },
+ [DB8500_REGULATOR_SWITCH_SIAMMDSPRET] = {
+ .constraints = {
+ .name = "db8500-sia-mmdsp-ret",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+ [DB8500_REGULATOR_SWITCH_SIAPIPE] = {
+ /* dependency to u8500-vape is handled outside regulator framework */
+ .constraints = {
+ .name = "db8500-sia-pipe",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .consumer_supplies = db8500_siapipe_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(db8500_siapipe_consumers),
+ },
+ [DB8500_REGULATOR_SWITCH_SGA] = {
+ .supply_regulator = "db8500-vape",
+ .constraints = {
+ .name = "db8500-sga",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .consumer_supplies = db8500_sga_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(db8500_sga_consumers),
+
+ },
+ [DB8500_REGULATOR_SWITCH_B2R2_MCDE] = {
+ .supply_regulator = "db8500-vape",
+ .constraints = {
+ .name = "db8500-b2r2-mcde",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .consumer_supplies = db8500_b2r2_mcde_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(db8500_b2r2_mcde_consumers),
+ },
+ [DB8500_REGULATOR_SWITCH_ESRAM12] = {
+ /*
+ * esram12 is set in retention and supplied by Vsafe when Vape is off,
+ * no need to hold Vape
+ */
+ .constraints = {
+ .name = "db8500-esram12",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .consumer_supplies = db8500_esram12_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(db8500_esram12_consumers),
+ },
+ [DB8500_REGULATOR_SWITCH_ESRAM12RET] = {
+ .constraints = {
+ .name = "db8500-esram12-ret",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+ [DB8500_REGULATOR_SWITCH_ESRAM34] = {
+ /*
+ * esram34 is set in retention and supplied by Vsafe when Vape is off,
+ * no need to hold Vape
+ */
+ .constraints = {
+ .name = "db8500-esram34",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ .consumer_supplies = db8500_esram34_consumers,
+ .num_consumer_supplies = ARRAY_SIZE(db8500_esram34_consumers),
+ },
+ [DB8500_REGULATOR_SWITCH_ESRAM34RET] = {
+ .constraints = {
+ .name = "db8500-esram34-ret",
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
+ },
+ },
+};
+
+static struct resource abx540_resources[] = {
+ [0] = {
+ .start = IRQ_DB8500_AB8500,
+ .end = IRQ_DB8500_AB8500,
+ .flags = IORESOURCE_IRQ
+ }
+};
+
+static struct mfd_cell db9540_prcmu_devs[] = {
+ {
+ .name = "dbx500-prcmu",
+ .platform_data = &probe_data,
+ .pdata_size = sizeof(probe_data),
+ },
+ {
+ .name = "cpufreq-ux500",
+ .id = -1,
+ },
+ {
+ .name = "db8500-prcmu-regulators",
+ .of_compatible = "stericsson,db8500-prcmu-regulator",
+ .platform_data = &dbx540_regulators,
+ .pdata_size = sizeof(dbx540_regulators),
+ },
+ {
+ .name = "ab9540-i2c",
+ .of_compatible = "stericsson,ab8500",
+ .num_resources = ARRAY_SIZE(abx540_resources),
+ .resources = abx540_resources,
+ .id = AB8500_VERSION_AB9540,
+ },
+};
+
+/**
+ * prcmu_fw_init - core init call for the Linux PRCMU fw init logic
+ *
+ */
+static int __init dbx540_prcmu_probe(struct platform_device *pdev)
+{
+ int irq = 0, err = 0;
+ struct device_node *np = pdev->dev.of_node;
+
+ init_prcm_registers();
+
+ writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR);
+
+ if (np)
+ irq = platform_get_irq(pdev, 0);
+
+ if (!np || irq <= 0)
+ irq = IRQ_DB8500_PRCMU1;
+
+ err = request_threaded_irq(irq, db8500_prcmu_irq_handler,
+ db8500_prcmu_irq_thread_fn, IRQF_NO_SUSPEND, "prcmu", NULL);
+ if (err < 0) {
+ pr_err("prcmu: Failed to allocate IRQ_DB8500_PRCMU1.\n");
+ err = -EBUSY;
+ goto no_irq_return;
+ }
+
+ db8500_irq_init(np);
+
+ if(np) {
+ if (of_property_read_u32_array(np,
+ "stericsson,db8500-frequency-tab ",
+ (u32 *)freq_table, 7) < 0)
+ dev_err(&pdev->dev, "frequency tab\n");
+ } else
+ freq_table =
+ (struct cpufreq_frequency_table *)dev_get_platdata(&pdev->dev);
+
+ update_freq_table(freq_table);
+
+ err = mfd_add_devices(&pdev->dev, 0, db9540_prcmu_devs,
+ ARRAY_SIZE(db9540_prcmu_devs), NULL,
+ 0);
+
+ if (err)
+ pr_err("prcmu: Failed to add subdevices\n");
+ else
+ pr_info("DBX540 PRCMU initialized\n");
+
+ /*
+ * Temporary U9540 bringup code - Enable all clock gates.
+ * Write 1 to all bits of PRCM_YYCLKEN0_MGT_SET and
+ * PRCM_YYCLKEN1_MGT_SET registers.
+ */
+ writel(~0, _PRCMU_BASE + 0x510); /* PRCM_YYCLKEN0_MGT_SET */
+ writel(~0, _PRCMU_BASE + 0x514); /* PRCM_YYCLKEN1_MGT_SET */
+
+ /*
+ * set a flag to indicate that prcmu drv is well initialised and that
+ * prcmu driver services can be called
+ */
+ prcmu_driver_initialised = 1;
+ cpu1_unplug_ongoing = 0;
+
+no_irq_return:
+ return err;
+}
+
+static const struct of_device_id db8500_prcmu_match[] = {
+ { .compatible = "stericsson,dbx540-prcmu"},
+ { },
+};
+
+static struct platform_driver dbx540_prcmu_driver = {
+ .driver = {
+ .name = "dbx540-prcmu",
+ .owner = THIS_MODULE,
+ .of_match_table = db8500_prcmu_match,
+ },
+ .probe = dbx540_prcmu_probe,
+};
+
+static int __init dbx540_prcmu_init(void)
+{
+ return platform_driver_register(&dbx540_prcmu_driver);
+}
+
+core_initcall(dbx540_prcmu_init);
+
+MODULE_AUTHOR("Mattias Nilsson <mattias.i.nilsson@xxxxxxxxxxxxxx>");
+MODULE_AUTHOR("Michel Jaouen <michel.jaouen@xxxxxxxxxxxxxx>");
+MODULE_AUTHOR("Loic Pallardy <loic.pallardy@xxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("DBX540 PRCMU Unit driver");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/mfd/db8500-prcmu.h b/include/linux/mfd/db8500-prcmu.h
index f3b8b60..68c35b0 100644
--- a/include/linux/mfd/db8500-prcmu.h
+++ b/include/linux/mfd/db8500-prcmu.h
@@ -470,7 +470,7 @@ struct prcmu_auto_pm_config {
u8 sva_policy;
};
-#ifdef CONFIG_MFD_DB8500_PRCMU
+#if defined(CONFIG_MFD_DB8500_PRCMU) || defined(CONFIG_MFD_DBX540_PRCMU)
struct prcmu_fops_register_data *db8500_prcmu_early_init(
struct prcmu_tcdm_map *map);
@@ -500,7 +500,7 @@ int db8500_prcmu_set_display_clocks(void);
int db8500_prcmu_disable_dsipll(void);
int db8500_prcmu_enable_dsipll(void);
-#else /* !CONFIG_MFD_DB8500_PRCMU */
+#else /* !(CONFIG_MFD_DB8500_PRCMU || CONFIG_MFD_DBX540_PRCMU) */
static struct prcmu_fops_register_data *db8500_prcmu_early_init(
struct prcmu_tcdm_map *map)
@@ -549,6 +549,6 @@ static inline int db8500_prcmu_stop_temp_sense(void)
return 0;
}
-#endif /* !CONFIG_MFD_DB8500_PRCMU */
+#endif /* !(CONFIG_MFD_DB8500_PRCMU || CONFIG_MFD_DBX540_PRCMU) */
#endif /* __MFD_DB8500_PRCMU_H */
diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h
index 49e71a7..4123f81 100644
--- a/include/linux/mfd/dbx500-prcmu.h
+++ b/include/linux/mfd/dbx500-prcmu.h
@@ -130,12 +130,17 @@ enum prcmu_clock {
PRCMU_SIACLK,
PRCMU_SVACLK,
PRCMU_ACLK,
+ /* HVA & G1 - U9540 only */
+ PRCMU_HVACLK,
+ PRCMU_G1CLK,
PRCMU_NUM_REG_CLOCKS,
PRCMU_SYSCLK = PRCMU_NUM_REG_CLOCKS,
PRCMU_CDCLK,
PRCMU_TIMCLK,
PRCMU_PLLSOC0,
PRCMU_PLLSOC1,
+ PRCMU_ARMSS,
+ PRCMU_ARMCLK,
PRCMU_PLLDDR,
PRCMU_PLLDSI,
PRCMU_DSI0CLK,
@@ -143,6 +148,13 @@ enum prcmu_clock {
PRCMU_DSI0ESCCLK,
PRCMU_DSI1ESCCLK,
PRCMU_DSI2ESCCLK,
+ /* LCD DSI PLL - U9540 only */
+ PRCMU_PLLDSI_LCD,
+ PRCMU_DSI0CLK_LCD,
+ PRCMU_DSI1CLK_LCD,
+ PRCMU_DSI0ESCCLK_LCD,
+ PRCMU_DSI1ESCCLK_LCD,
+ PRCMU_DSI2ESCCLK_LCD,
};
/**
@@ -193,6 +205,17 @@ enum ddr_opp {
DDR_25_OPP = 0x02,
};
+/**
+ * enum vsafe_opp - VSAFE OPP states definition
+ * @VSAFE_100_OPP: The new VSAFE operating point is vsafe100opp
+ * @VSAFE_50_OPP: The new DDR operating point is vsafe50opp
+ */
+enum vsafe_opp {
+ VSAFE_OPP_INIT = 0x00,
+ VSAFE_50_OPP = 0x01,
+ VSAFE_100_OPP = 0x02,
+};
+
/*
* Definitions for controlling ESRAM0 in deep sleep.
*/
@@ -253,6 +276,7 @@ struct prcmu_fw_version {
};
#include <linux/mfd/db8500-prcmu.h>
+#include <linux/mfd/dbx540-prcmu.h>
#if defined(CONFIG_UX500_SOC_DB8500)
diff --git a/include/linux/mfd/dbx540-prcmu.h b/include/linux/mfd/dbx540-prcmu.h
new file mode 100644
index 0000000..b85769e
--- /dev/null
+++ b/include/linux/mfd/dbx540-prcmu.h
@@ -0,0 +1,96 @@
+/*
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ * Author: Michel Jaouen <michel.jaouen@xxxxxxxxxxxxxx>
+ *
+ * PRCMU f/w APIs
+ */
+#ifndef __MFD_DBX540_PRCMU_H
+#define __MFD_DBX540_PRCMU_H
+
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+
+
+
+enum ap_pwrst_trans_status_9540 {
+ EXECUTETODEEPIDLE = 0xE8,
+ EXECUTETODEEPSLEEP = 0xF8
+};
+
+#define PRCMU_DDR_SLEEP_STRAT_DDRCTRL_NB 2
+#define PRCMU_DDR_SLEEP_STRAT_LP_MODE_NB 3
+
+enum ddr_sleep_strat_ap_pwrst {
+ DDR_SLEEP_STRAT_AP_IDLE_INDEX,
+ DDR_SLEEP_STRAT_AP_DEEPIDLE_INDEX,
+ DDR_SLEEP_STRAT_AP_SLEEP_INDEX,
+};
+
+enum ddr_ctrl_lp_mode {
+ DDRCTRLSTATE_OFFHIGHLAT = 0,
+ DDRCTRLSTATE_OFFLOWLAT,
+ DDRCTRLSTATE_ON,
+};
+
+enum ddr_ctrl_nb {
+ DDR_SLEEP_STRAT_DDRCTRL0,
+ DDR_SLEEP_STRAT_DDRCTRL1
+};
+
+#ifdef CONFIG_MFD_DBX540_PRCMU
+struct prcmu_fops_register_data *dbx540_prcmu_early_init(
+ struct prcmu_tcdm_map *map);
+int prcmu_set_vsafe_opp(u8 opp);
+int prcmu_get_vsafe_opp(void);
+int prcmu_set_ddr_sleep_strat_policy(u8 ddr_ctrl_nb, u8 lp_mode,
+ u8 ddr_ctrl_mode);
+void prcmu_set_sdmmc_psw(bool status);
+#ifdef CONFIG_C2C
+void prcmu_c2c_request_notif_up(void);
+void prcmu_c2c_request_reset(void);
+#endif
+
+void prcmu_reset_hva(void);
+void prcmu_reset_hx170(void);
+void prcmu_pullup_tdo(bool enable);
+
+#else /* !CONFIG_MFD_DBX540_PRCMU */
+static inline struct prcmu_fops_register_data *dbx540_prcmu_early_init(
+ struct prcmu_tcdm_map *map)
+{
+ return NULL;
+}
+
+static inline int prcmu_set_vsafe_opp(u8 opp)
+{
+ return -EINVAL;
+}
+
+static inline int prcmu_get_vsafe_opp(void)
+{
+ return -EINVAL;
+}
+
+static inline int prcmu_set_ddr_sleep_strat_policy(u8 ddr_ctrl_nb, u8 lp_mode,
+ u8 ddr_ctrl_mode)
+{
+ return -EINVAL;
+}
+
+static inline void db8540_prcmu_set_sdmmc_psw(bool status) {}
+
+#ifdef CONFIG_C2C
+static inline void prcmu_c2c_request_notif_up(void) {}
+static inline void prcmu_c2c_request_reset(void) {}
+#endif
+
+static inline void prcmu_reset_hva(void) {}
+static inline void prcmu_reset_hx170(void) {}
+static inline void prcmu_pullup_tdo(bool enable) {}
+
+#endif /* !CONFIG_MFD_DBX540_PRCMU */
+
+#endif /* __MFD_DBX540_PRCMU_H */
--
1.7.11.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/