Re: linux-next: Tree for Sept 6 (does not boot on AMD64)

[Sedat Dilek]

On Thu, Sep 6, 2012 at 9:23 AM, Stephen Rothwell <sfr@xxxxxxxxxxxxxxxx> wrote:
> Hi all,
>
> Changes since 20120905:
>
> New tree: arm64
>
> The powerpc tree gained a build failure for which I reverted 3 commits.
>
> The net-next tree lost its build failure.
>
> The trivial tree gained a conflict against the powerpc tree.
>
> The spi-mb tree gained a build failure so I used the version from
> next-20120905.
>
> The driver-core tree gained a build failure (form an interaction with the
> workqueues tree) for which I applied a merge fix patch.
>
> The tty tree gained a build failure for which I applied a patch.
>
> The staging tree lost its build failure.
>
> The arm-soc tree gained a conflict against the usb tree.
>
> ----------------------------------------------------------------------------
>

Hi,

Unfortunately, today's linux-next does not boot here on Ubuntu/precise AMD64.
My yesterday's next-20120905 is fine.

I throw out all my additional patches an rebuild again as "-2", but
this linux-image does not boot.
It's in very early stage.
I removed "quiet" etc. from kernel-command-line, but this reveals not much more.

>From the attached kernel-config.diff:
Dunno why the 2nd is disabled now and try to turn off the 1st one in a
"-3" build.

+CONFIG_X86_ACPI_CPUFREQ_CPB=y
-CONFIG_USB_LIBUSUAL=y

If you know of a culprit or see anything in the kernel-config.diff let me know.

Regards,
- Sedat -
--- /boot/config-3.6.0-rc4-next20120905-1-iniza-generic	2012-09-05 11:41:02.000000000 +0200
+++ /boot/config-3.6.0-rc4-next20120906-2-iniza-generic	2012-09-06 13:32:42.000000000 +0200
@@ -580,6 +580,7 @@ CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
 #
 CONFIG_X86_PCC_CPUFREQ=m
 CONFIG_X86_ACPI_CPUFREQ=y
+CONFIG_X86_ACPI_CPUFREQ_CPB=y
 CONFIG_X86_POWERNOW_K8=y
 CONFIG_X86_SPEEDSTEP_CENTRINO=y
 CONFIG_X86_P4_CLOCKMOD=m
@@ -1671,7 +1672,6 @@ CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_NVME=m
 CONFIG_BLK_DEV_OSD=m
 CONFIG_BLK_DEV_SX8=m
-CONFIG_BLK_DEV_UB=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=65536
@@ -3065,6 +3065,7 @@ CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_CONSOLE_POLL=y
 CONFIG_SERIAL_JSM=m
+# CONFIG_SERIAL_SCCNXP is not set
 CONFIG_SERIAL_TIMBERDALE=m
 CONFIG_SERIAL_ALTERA_JTAGUART=m
 CONFIG_SERIAL_ALTERA_UART=m
@@ -4792,7 +4793,6 @@ CONFIG_USB_STORAGE_KARMA=m
 CONFIG_USB_STORAGE_CYPRESS_ATACB=m
 CONFIG_USB_STORAGE_ENE_UB6250=m
 CONFIG_USB_UAS=m
-CONFIG_USB_LIBUSUAL=y
 
 #
 # USB Imaging devices
@@ -5047,7 +5047,7 @@ CONFIG_LEDS_DELL_NETBOOKS=m
 CONFIG_LEDS_MC13783=m
 CONFIG_LEDS_TCA6507=m
 CONFIG_LEDS_MAX8997=m
-# CONFIG_LEDS_LM3556 is not set
+# CONFIG_LEDS_LM355x is not set
 CONFIG_LEDS_OT200=m
 # CONFIG_LEDS_BLINKM is not set
 CONFIG_LEDS_TRIGGERS=y
@@ -5595,6 +5595,7 @@ CONFIG_PHONE=m
 CONFIG_PHONE_IXJ=m
 CONFIG_PHONE_IXJ_PCMCIA=m
 CONFIG_USB_WPAN_HCD=m
+# CONFIG_IPACK_BUS is not set
 CONFIG_WIMAX_GDM72XX=m
 CONFIG_WIMAX_GDM72XX_QOS=y
 CONFIG_WIMAX_GDM72XX_K_MODE=y
@@ -5694,6 +5695,7 @@ CONFIG_EXTCON=y
 # Extcon Device Drivers
 #
 CONFIG_EXTCON_GPIO=m
+# CONFIG_EXTCON_ADC_JACK is not set
 # CONFIG_EXTCON_MAX77693 is not set
 CONFIG_EXTCON_MAX8997=m
 CONFIG_MEMORY=y
@@ -5858,7 +5860,6 @@ CONFIG_QUOTACTL_COMPAT=y
 CONFIG_AUTOFS4_FS=m
 CONFIG_FUSE_FS=y
 CONFIG_CUSE=m
-CONFIG_OVERLAYFS_FS=m
 CONFIG_GENERIC_ACL=y
 
 #
@@ -6279,6 +6280,7 @@ CONFIG_SECURITY_TOMOYO_ACTIVATION_TRIGGE
 CONFIG_SECURITY_APPARMOR=y
 CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
 CONFIG_SECURITY_YAMA=y
+# CONFIG_SECURITY_YAMA_STACKED is not set
 CONFIG_INTEGRITY=y
 CONFIG_INTEGRITY_SIGNATURE=y
 # CONFIG_IMA is not set

Attachment: config-3.6.0-rc4-next20120906-2-iniza-generic
Description: Binary data