Re: [PATCH v6] uartclk value from serial_core exposed to sysfs

[Tomas Hlavacek]

Hello!

On Thu, Sep 6, 2012 at 8:54 PM, Jiri Slaby <jslaby@xxxxxxx> wrote:
> On 09/06/2012 08:39 PM, Tomas Hlavacek wrote:
>> On Thu, Sep 6, 2012 at 7:54 PM, Jiri Slaby <jslaby@xxxxxxx> wrote:
>>> On 09/06/2012 03:17 AM, Tomas Hlavacek wrote:
>>>> @@ -2362,8 +2392,8 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport)
>>>>        * Register the port whether it's detected or not.  This allows
>>>>        * setserial to be used to alter this ports parameters.
>>>>        */
>>>> -     tty_dev = tty_port_register_device(port, drv->tty_driver, uport->line,
>>>> -                     uport->dev);
>>>> +     tty_dev = tty_register_device_attr(drv->tty_driver, uport->line,
>>>> +                     uport->dev, port, tty_dev_attr_groups);
>>>
>>> This makes me believe you have not tested the change at all?
>>
>> Thanks! I can't believe I missed that. (And I actually tested that,
>> but I have to admit that it was not enough apparently.)
>>
>> I will re-send the patch (after some additional testing and double-checking).
>
> Ok. A couple more questions...
>
> * why are you passing tty_port to the struct device's private data and
> not uart_port proper? Is this for some future use?

I actually used the uart_port structure in older RFC versions of the
patch. Alan Cox advised to use struct tty_port because of consistency.
More precisely he said (in an e-mail from Aug 12):

I'd rather however it pointed
to the tty_port that each tty device has (or very soon will be required
to have). You can still find the uart_foo structs from that but it means
we can do the dev_set_drvdata() in a consistent manner for all tty
devices in the kernel. That in turn means we can make some of the sysfs
valid the same way.

> * cannot be all those attribute structs const?

It seems that making

static const struct attribute *tty_dev_attrs[] = ...

produces warning:

drivers/tty/serial/serial_core.c:2334:2: warning: initialization from
incompatible pointer type [enabled by default]
drivers/tty/serial/serial_core.c:2334:2: warning: (near initialization
for âtty_dev_attr_group.attrsâ) [enabled by default]

But others can. I am going to make them const in following patch.

> * kdoc for tty_register_device_attr says that when
> TTY_DRIVER_DYNAMIC_DEV is not set, tty_register_device_attr *should* not
> be called. But it must not be called, otherwise it will fail and emit a
> warning as a bonus, right?

Yes. In fact it does the same thing as tty_register_device() did
before itself. The _attr version is only slightly refactored and the
doc regarding the TTY_DRIVER_DYNAMIC_DEV test is the same as in old
non-_attr version.
I am not sure that I am the right person to change the doc because I
am not an author of this part of doc nor of the test in the function.

> * final remark. I would prefer declaration and code be delimited by a
> new line in uart_get_attr_uartclk:
> <===>
> +       int ret;
> +
> +       struct tty_port *port = dev_get_drvdata(dev);
> +       struct uart_state *state = container_of(port, struct uart_state,
> port);
> +       mutex_lock(&state->port.mutex);
> <===>
>
> Like:
> <===>
>   struct tty_port *port = ...;
>   struct uart_state *state = ...;
>   int ret;
>
>   mutex_lock(&state->port.mutex);
> <===>

Yes, it looks better. I am going to it accordingly.

Tomas
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/