Re: [PATCH can-next v6] can: add tx/rx LED trigger support

[Kurt Van Dijck]

On Thu, Sep 06, 2012 at 10:57:28PM +0200, Fabio Baltieri wrote:
> On Thu, Sep 06, 2012 at 05:11:58PM +0200, Kurt Van Dijck wrote:
> > > > I also think that led triggers should be available.
> > > 
> > > Right, that's why I think the only way is to use device name.
> > 
> > yes, but it has 2 disadvantages:
> > * inconvenient. I like 'can0-tx' much more than any device name
> >   (Sorry I can't get any real example, I'm not at home now).
> >   And for usecases where the actual device of the CAN iface is
> >   important, such setup requires udev to assign the proper iface names.
> 
> Can't argue with that... I'm trying to see how it comes but names like
> "can-3-2:1.0-tx" doesn't looks that friendly to me...

"can-3-2:1.0" is an iface name?
We must keep default iface names can%d. Only in the usecase that someone
wants to name its ifaces according device names, he/she should manually
adjust udev rules on his/her system ...

And if the iface is names "can-3-2:1.0", "can-3-2:1.0-tx" _is_
a friendly trigger name.

> 
> > * extends existing function calls like sja1000
> 
> Indeed.
> 
> > > > I asked the question because detach & attach leds to interfaces would
> > > > indeed break that.
> > > 
> > > Sure? I think that the trigger would be set again on reattach, as
> > > default_trigger is checked both in led_cdev probe and
> > > trigger_register, see:
> > > 
> > > http://lxr.free-electrons.com/source/drivers/leds/led-triggers.c#L180
> > > 
> > > I'll try that tonight.
> > 
> > It looks even more inconvenient. It only works as expected when you don't
> > change the trigger afterwards, but still it is possible (as should be),
> > so the design of trigger is ... wrong.
> > example:
> > When you put another trigger to a led, and have a proper sequence of
> > 'ip link set xxx up' and 'ip link set xxx down', you will end up
> > with the default_trigger again.
> > I realize I'm looking at unusual scenario's.
> 
> That's not correct, default trigger is going to be set only if there are
> no other trigger assigned to the LED, and only on led probe and trigger
> probe.
> 
> So, the LED framework is not going to change the trigger if you manually
> changed it to something else, and in any case default_trigger assignment
> only happens at probe/exit, not when interface is set up/down.

I think you're also arguing against a register/unregister during iface up/down.
We agree.

Kurt
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/