RE: [PATCH] spi:clk: preparation for switch to common clockframework

[Karicheri, Muralidharan]

>> -----Original Message-----
>> From: Karicheri, Muralidharan
>> Sent: Thursday, August 30, 2012 2:25 PM
>> To: linux-kernel@xxxxxxxxxxxxxxx; mturquette@xxxxxxxxxx; spi-devel-
>> general@xxxxxxxxxxxxxxxxxxxxx; grant.likely@xxxxxxxxxxxx
>> Cc: Karicheri, Muralidharan
>> Subject: [PATCH] spi:clk: preparation for switch to common clock framework
>> 
>> As a first step towards migrating davinci platforms to use common clock
>> framework, replace all instances of clk_enable() with clk_prepare_enable()
>> and clk_disable() with clk_disable_unprepare(). Until the platform is
>> switched to use the CONFIG_HAVE_CLK_PREPARE Kconfig variable, this just
>> adds a might_sleep() call and would work without any issues.
>> 
>> This will make it easy later to switch to common clk based implementation
>> of clk driver from DaVinci specific driver.
>> 
>> Signed-off-by: Murali Karicheri <m-karicheri2@xxxxxx>
>> ---
>>  drivers/spi/spi-davinci.c |    6 +++---
>>  1 file changed, 3 insertions(+), 3 deletions(-)
>> 
>> diff --git a/drivers/spi/spi-davinci.c b/drivers/spi/spi-davinci.c
>> index 9b2901f..71a6423 100644
>> --- a/drivers/spi/spi-davinci.c
>> +++ b/drivers/spi/spi-davinci.c
>> @@ -873,7 +873,7 @@ static int __devinit davinci_spi_probe(struct platform_device
>> *pdev)
>>  		ret = -ENODEV;
>>  		goto put_master;
>>  	}
>> -	clk_enable(dspi->clk);
>> +	clk_prepare_enable(dspi->clk);
>> 
>>  	master->bus_num = pdev->id;
>>  	master->num_chipselect = pdata->num_chipselect;
>> @@ -959,7 +959,7 @@ free_dma:
>>  	edma_free_channel(dspi->dma.rx_channel);
>>  	edma_free_slot(dspi->dma.dummy_param_slot);
>>  free_clk:
>> -	clk_disable(dspi->clk);
>> +	clk_disable_unprepare(dspi->clk);
>>  	clk_put(dspi->clk);
>>  put_master:
>>  	spi_master_put(master);
>> @@ -995,7 +995,7 @@ static int __devexit davinci_spi_remove(struct platform_device
>> *pdev)
>> 
>>  	spi_bitbang_stop(&dspi->bitbang);
>> 
>> -	clk_disable(dspi->clk);
>> +	clk_disable_unprepare(dspi->clk);
>>  	clk_put(dspi->clk);
>>  	spi_master_put(master);
>>  	free_irq(dspi->irq, dspi);
>> --
>> 1.7.9.5

subsystem owner,

Could you please review and apply this patch as needed? We need to get this upstream before submitting the patch for Common clock framework support for mach-davinci. If I need to follow a specific procedure to get this merged, please direct me to a process page.

Thanks.

Murali Karicheri
Software Design Engineer

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/