[PATCH 01/14] serial/amba-pl011: fix ages old copy-paste errors

From: Anton Vorontsov
Date: Mon Sep 10 2012 - 00:14:25 EST


From: Linus Walleij <linus.walleij@xxxxxxxxxx>

The PL011 driver has a number of symbols referring to "pl01x"
(probably once shared with the pl010 driver) and some even named
"pl010" (probably a pure copy-paste artifact). Lets name all
local static functions with the prefix pl011_* for clarity.

Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
Signed-off-by: Anton Vorontsov <anton.vorontsov@xxxxxxxxxx>
---

The patch was taken from the TTY tree.

If this patch rejects because 'already applied', this means that your
tree is probably based on TTY tree or -next (e.g. -mm). In which case
you don't need this patch, just drop it.

If your tree is based on Linus' tree, you need this patch to not bring
horrible conflicts into -next.

drivers/tty/serial/amba-pl011.c | 34 +++++++++++++++++-----------------
1 file changed, 17 insertions(+), 17 deletions(-)

diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c
index d3553b5..92b1ac8 100644
--- a/drivers/tty/serial/amba-pl011.c
+++ b/drivers/tty/serial/amba-pl011.c
@@ -1215,14 +1215,14 @@ static irqreturn_t pl011_int(int irq, void *dev_id)
return IRQ_RETVAL(handled);
}

-static unsigned int pl01x_tx_empty(struct uart_port *port)
+static unsigned int pl011_tx_empty(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int status = readw(uap->port.membase + UART01x_FR);
return status & (UART01x_FR_BUSY|UART01x_FR_TXFF) ? 0 : TIOCSER_TEMT;
}

-static unsigned int pl01x_get_mctrl(struct uart_port *port)
+static unsigned int pl011_get_mctrl(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int result = 0;
@@ -1285,7 +1285,7 @@ static void pl011_break_ctl(struct uart_port *port, int break_state)
}

#ifdef CONFIG_CONSOLE_POLL
-static int pl010_get_poll_char(struct uart_port *port)
+static int pl011_get_poll_char(struct uart_port *port)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int status;
@@ -1297,7 +1297,7 @@ static int pl010_get_poll_char(struct uart_port *port)
return readw(uap->port.membase + UART01x_DR);
}

-static void pl010_put_poll_char(struct uart_port *port,
+static void pl011_put_poll_char(struct uart_port *port,
unsigned char ch)
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
@@ -1637,7 +1637,7 @@ static const char *pl011_type(struct uart_port *port)
/*
* Release the memory region(s) being used by 'port'
*/
-static void pl010_release_port(struct uart_port *port)
+static void pl011_release_port(struct uart_port *port)
{
release_mem_region(port->mapbase, SZ_4K);
}
@@ -1645,7 +1645,7 @@ static void pl010_release_port(struct uart_port *port)
/*
* Request the memory region(s) being used by 'port'
*/
-static int pl010_request_port(struct uart_port *port)
+static int pl011_request_port(struct uart_port *port)
{
return request_mem_region(port->mapbase, SZ_4K, "uart-pl011")
!= NULL ? 0 : -EBUSY;
@@ -1654,18 +1654,18 @@ static int pl010_request_port(struct uart_port *port)
/*
* Configure/autoconfigure the port.
*/
-static void pl010_config_port(struct uart_port *port, int flags)
+static void pl011_config_port(struct uart_port *port, int flags)
{
if (flags & UART_CONFIG_TYPE) {
port->type = PORT_AMBA;
- pl010_request_port(port);
+ pl011_request_port(port);
}
}

/*
* verify the new serial_struct (for TIOCSSERIAL).
*/
-static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser)
+static int pl011_verify_port(struct uart_port *port, struct serial_struct *ser)
{
int ret = 0;
if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA)
@@ -1678,9 +1678,9 @@ static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser)
}

static struct uart_ops amba_pl011_pops = {
- .tx_empty = pl01x_tx_empty,
+ .tx_empty = pl011_tx_empty,
.set_mctrl = pl011_set_mctrl,
- .get_mctrl = pl01x_get_mctrl,
+ .get_mctrl = pl011_get_mctrl,
.stop_tx = pl011_stop_tx,
.start_tx = pl011_start_tx,
.stop_rx = pl011_stop_rx,
@@ -1691,13 +1691,13 @@ static struct uart_ops amba_pl011_pops = {
.flush_buffer = pl011_dma_flush_buffer,
.set_termios = pl011_set_termios,
.type = pl011_type,
- .release_port = pl010_release_port,
- .request_port = pl010_request_port,
- .config_port = pl010_config_port,
- .verify_port = pl010_verify_port,
+ .release_port = pl011_release_port,
+ .request_port = pl011_request_port,
+ .config_port = pl011_config_port,
+ .verify_port = pl011_verify_port,
#ifdef CONFIG_CONSOLE_POLL
- .poll_get_char = pl010_get_poll_char,
- .poll_put_char = pl010_put_poll_char,
+ .poll_get_char = pl011_get_poll_char,
+ .poll_put_char = pl011_put_poll_char,
#endif
};

--
1.7.11.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/