[PATCH] pinctrl: clarify idle vs sleep states

[Linus Walleij]

From: Linus Walleij <linus.walleij@xxxxxxxxxx>

This pure documentation fix tries to align the "idle" and
"sleep" pin states to the idle and suspend states from
runtime PM.

Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
 include/linux/pinctrl/pinctrl-state.h | 8 +++++---
 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/include/linux/pinctrl/pinctrl-state.h b/include/linux/pinctrl/pinctrl-state.h
index 634608dc..2dbf71d 100644
--- a/include/linux/pinctrl/pinctrl-state.h
+++ b/include/linux/pinctrl/pinctrl-state.h
@@ -6,13 +6,15 @@
  * @PINCTRL_STATE_DEFAULT: the state the pinctrl handle shall be put
  *	into as default, usually this means the pins are up and ready to
  *	be used by the device driver. This state is commonly used by
- *	hogs to configure muxing and pins at boot.
+ *	hogs to configure muxing and pins at boot, and also as a state
+ *	to go into when returning from sleep and idle in
+ *	.pm_runtime_resume() or ordinary .resume() for example.
  * @PINCTRL_STATE_IDLE: the state the pinctrl handle shall be put into
  *	when the pins are idle. Could typically be set from a
- *	pm_runtime_suspend() operation.
+ *	pm_runtime_idle() operation.
  * @PINCTRL_STATE_SLEEP: the state the pinctrl handle shall be put into
  *	when the pins are sleeping. Could typically be set from a
- *	common suspend() function.
+ *	common pm_runtime_suspend() or ordinary .suspend() function.
  */
 #define PINCTRL_STATE_DEFAULT "default"
 #define PINCTRL_STATE_IDLE "idle"
-- 
1.7.11.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/