Re: [PATCH 37/57] power: ab8500_bm: Quick re-attach chargingbehaviour

[Anton Vorontsov]

On Tue, Sep 25, 2012 at 10:12:34AM -0600, mathieu.poirier@xxxxxxxxxx wrote:
> From: Kalle Komierowski <karl.komierowski@xxxxxxxxxxxxxx>
> 
> Due to a bug in some AB8500 ASICs charger removal cannot always
> be detected if the removal and reinsertion is done to close in time.
> This patch detects above described case and handles the situation
> so that charging will be kept turned on.
> 
> Signed-off-by: Kalle Komierowski <karl.komierowski@xxxxxxxxxxxxxx>
> Signed-off-by: Mathieu Poirier <mathieu.poirier@xxxxxxxxxx>
> Reviewed-by: Marcus COOPER <marcus.xm.cooper@xxxxxxxxxxxxxx>
> Reviewed-by: Jonas ABERG <jonas.aberg@xxxxxxxxxxxxxx>
> Reviewed-by: Philippe LANGLAIS <philippe.langlais@xxxxxxxxxxxxxx>
> ---
>  drivers/power/ab8500_charger.c            |  105 ++++++++++++++++++++++++++++-
>  drivers/power/abx500_chargalg.c           |   31 ++++++++-
>  include/linux/mfd/abx500/ux500_chargalg.h |    1 +
>  3 files changed, 134 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
> index 8137ea5..70e7c5e 100644
> --- a/drivers/power/ab8500_charger.c
> +++ b/drivers/power/ab8500_charger.c
> @@ -49,6 +49,7 @@
>  #define VBUS_DET_DBNC100		0x02
>  #define VBUS_DET_DBNC1			0x01
>  #define OTP_ENABLE_WD			0x01
> +#define DROP_COUNT_RESET		0x01
>  
>  #define MAIN_CH_INPUT_CURR_SHIFT	4
>  #define VBUS_IN_CURR_LIM_SHIFT		4
> @@ -1672,6 +1673,105 @@ static int ab8500_charger_usb_en(struct ux500_charger *charger,
>  }
>  
>  /**
> + * ab8500_charger_usb_check_enable() - enable usb charging
> + * @charger:	pointer to the ux500_charger structure
> + * @vset:	charging voltage
> + * @iset:	charger output current
> + *
> + * Check if the VBUS charger has been disconnected and reconnected without
> + * AB8500 rising an interrupt. Returns 0 on success.
> + */
> +static int ab8500_charger_usb_check_enable(struct ux500_charger *charger,
> +	int vset, int iset)

Wrong indentation (should be at least two tabs; sometimes the driver
aligning to opening parenthesis, sometimes not... it's better to be
consistent).

> +{
> +	u8 usbch_ctrl1 = 0;
> +	int ret = 0;
> +

No need for this empty line.

> +	struct ab8500_charger *di = to_ab8500_charger_usb_device_info(charger);
> +
> +	if (!di->usb.charger_connected)
> +		return ret;
> +
> +	ret = abx500_get_register_interruptible(di->dev, AB8500_CHARGER,
> +				AB8500_USBCH_CTRL1_REG, &usbch_ctrl1);
> +	if (ret < 0) {
> +		dev_err(di->dev, "ab8500 read failed %d\n", __LINE__);
> +		return ret;
> +	}
> +	dev_dbg(di->dev, "USB charger ctrl: 0x%02x\n", usbch_ctrl1);
> +
> +	if (!(usbch_ctrl1 & USB_CH_ENA)) {

By returning early you can greatly reduce indentation and make the
code more readable.

	if (usbch_ctrl1 & USB_CH_ENA)
		return ret;

	...the rest...

> +		dev_info(di->dev, "Charging has been disabled abnormally and will be re-enabled\n");
> +
> +		ret = abx500_mask_and_set_register_interruptible(di->dev,
> +					AB8500_CHARGER, AB8500_CHARGER_CTRL,
> +					DROP_COUNT_RESET, DROP_COUNT_RESET);
> +		if (ret < 0) {
> +			dev_err(di->dev, "ab8500 write failed %d\n", __LINE__);
> +			return ret;
> +		}
> +
> +		ret = ab8500_charger_usb_en(&di->usb_chg, true, vset, iset);
> +		if (ret < 0) {
> +			dev_err(di->dev, "Failed to enable VBUS charger %d\n",
> +					__LINE__);
> +			return ret;
> +		}
> +	}
> +	return ret;
> +}
> +
> +/**
> + * ab8500_charger_ac_check_enable() - enable usb charging
> + * @charger:	pointer to the ux500_charger structure
> + * @vset:	charging voltage
> + * @iset:	charger output current
> + *
> + * Check if the AC charger has been disconnected and reconnected without
> + * AB8500 rising an interrupt. Returns 0 on success.
> + */
> +static int ab8500_charger_ac_check_enable(struct ux500_charger *charger,
> +	int vset, int iset)

This function is very very similar to the previous one. The only
difference seem to be whether you use MAIN_CH_ENA or USB_CH_ENA..

So would it make sense to introduce a helper function that accepts one
additional parameter:

ab8500_charger_check_enable(....., int ch_ena)

?

[...]
> +static int abx500_chargalg_check_charger_enable(struct abx500_chargalg *di)
> +{
> +	switch (di->charge_state) {
> +	case STATE_NORMAL:
> +	case STATE_MAINTENANCE_A:
> +	case STATE_MAINTENANCE_B:
> +		break;
> +	default:
> +		return 0;
> +	}
> +
> +	if (di->chg_info.charger_type & USB_CHG) {
> +		return di->usb_chg->ops.check_enable(di->usb_chg,
> +			di->bat->bat_type[di->bat->batt_id].normal_vol_lvl,
> +			di->bat->bat_type[di->bat->batt_id].normal_cur_lvl);
> +	} else if (di->chg_info.charger_type & AC_CHG) {
> +		return di->ac_chg->ops.check_enable(di->ac_chg,
> +			di->bat->bat_type[di->bat->batt_id].normal_vol_lvl,
> +			di->bat->bat_type[di->bat->batt_id].normal_cur_lvl);

di->bat is very repetative, and can be avoided by introducing a variable.

(Not that it would greatly help readability, but a little, yes.)

> +	}
> +	return -ENXIO;
> +}
> +
>  /**
>   * abx500_chargalg_check_charger_connection() - Check charger connection change
>   * @di:		pointer to the abx500_chargalg structure
> @@ -1220,6 +1243,7 @@ static void abx500_chargalg_external_power_changed(struct power_supply *psy)
>  static void abx500_chargalg_algorithm(struct abx500_chargalg *di)
>  {
>  	int charger_status;
> +	int ret;
>  
>  	/* Collect data from all power_supply class devices */
>  	class_for_each_device(power_supply_class, NULL,
> @@ -1228,8 +1252,13 @@ static void abx500_chargalg_algorithm(struct abx500_chargalg *di)
>  	abx500_chargalg_end_of_charge(di);
>  	abx500_chargalg_check_temp(di);
>  	abx500_chargalg_check_charger_voltage(di);
> -

Stray change.

>  	charger_status = abx500_chargalg_check_charger_connection(di);
> +
> +	ret = abx500_chargalg_check_charger_enable(di);
> +	if (ret < 0)
> +		dev_err(di->dev, "Checking charger if enabled error: %d line: %d\n",
> +				ret, __LINE__);
> +
>  	/*
>  	 * First check if we have a charger connected.
>  	 * Also we don't allow charging of unknown batteries if configured
> diff --git a/include/linux/mfd/abx500/ux500_chargalg.h b/include/linux/mfd/abx500/ux500_chargalg.h
> index d43ac0f..110d12f 100644
> --- a/include/linux/mfd/abx500/ux500_chargalg.h
> +++ b/include/linux/mfd/abx500/ux500_chargalg.h
> @@ -17,6 +17,7 @@ struct ux500_charger;
>  
>  struct ux500_charger_ops {
>  	int (*enable) (struct ux500_charger *, int, int, int);
> +	int (*check_enable) (struct ux500_charger *, int, int);
>  	int (*kick_wd) (struct ux500_charger *);
>  	int (*update_curr) (struct ux500_charger *, int);
>  };
> -- 
> 1.7.5.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/