[PATCH 05/16] iommu/amd: Split device table initialization into irq and dma part
From: Joerg Roedel
Date: Fri Sep 28 2012 - 08:26:03 EST
When the IOMMU is enabled very early (as with irq-remapping)
some devices are still in BIOS hand. When dma is blocked
early this can cause lots of IO_PAGE_FAULTs. So delay the
DMA initialization and do it right before the dma_ops are
initialized.
To be secure, block all interrupts by default when irq-remapping is
enabled in the system. They will be reenabled on demand
later.
Signed-off-by: Joerg Roedel <joerg.roedel@xxxxxxx>
---
drivers/iommu/amd_iommu_init.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/iommu/amd_iommu_init.c b/drivers/iommu/amd_iommu_init.c
index 3f0b68f..8e9d71c 100644
--- a/drivers/iommu/amd_iommu_init.c
+++ b/drivers/iommu/amd_iommu_init.c
@@ -1378,7 +1378,7 @@ static int __init init_memory_definitions(struct acpi_table_header *table)
* Init the device table to not allow DMA access for devices and
* suppress all page faults
*/
-static void init_device_table(void)
+static void init_device_table_dma(void)
{
u32 devid;
@@ -1388,6 +1388,17 @@ static void init_device_table(void)
}
}
+static void init_device_table(void)
+{
+ u32 devid;
+
+ if (!amd_iommu_irq_remap)
+ return;
+
+ for (devid = 0; devid <= amd_iommu_last_bdf; ++devid)
+ set_dev_entry_bit(devid, DEV_ENTRY_IRQ_TBL_EN);
+}
+
static void iommu_init_flags(struct amd_iommu *iommu)
{
iommu->acpi_flags & IVHD_FLAG_HT_TUN_EN_MASK ?
@@ -1778,8 +1789,14 @@ static bool detect_ivrs(void)
static int amd_iommu_init_dma(void)
{
+ struct amd_iommu *iommu;
int ret;
+ init_device_table_dma();
+
+ for_each_iommu(iommu)
+ iommu_flush_all_caches(iommu);
+
if (iommu_pass_through)
ret = amd_iommu_init_passthrough();
else
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/