Re: [PATCH 2/6] usb: dwc3-omap: use runtime API's to enable clocks
From: ABRAHAM, KISHON VIJAY
Date: Fri Sep 28 2012 - 09:31:32 EST
Hi,
On Fri, Sep 28, 2012 at 6:28 PM, Felipe Balbi <balbi@xxxxxx> wrote:
> Hi,
>
> On Fri, Sep 28, 2012 at 06:23:11PM +0530, Kishon Vijay Abraham I wrote:
>> Before accessing any register, runtime API's should be invoked to enable
>> the clocks. runtime API's are added here to prevent abort during register
>> access.
>>
>> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
>> ---
>> drivers/usb/dwc3/dwc3-omap.c | 10 ++++++++++
>> 1 file changed, 10 insertions(+)
>>
>> diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c
>> index 34578de..6a0e17f 100644
>> --- a/drivers/usb/dwc3/dwc3-omap.c
>> +++ b/drivers/usb/dwc3/dwc3-omap.c
>> @@ -43,6 +43,7 @@
>> #include <linux/spinlock.h>
>> #include <linux/platform_device.h>
>> #include <linux/platform_data/dwc3-omap.h>
>> +#include <linux/pm_runtime.h>
>> #include <linux/dma-mapping.h>
>> #include <linux/ioport.h>
>> #include <linux/io.h>
>> @@ -281,6 +282,13 @@ static int __devinit dwc3_omap_probe(struct platform_device *pdev)
>> omap->irq = irq;
>> omap->base = base;
>>
>> + pm_runtime_enable(dev);
>> + ret = pm_runtime_get_sync(dev);
>> + if (ret < 0) {
>> + dev_err(dev, "get_sync failed with err %d\n", ret);
>> + goto err1;
>> + }
>> +
>> reg = dwc3_omap_readl(omap->base, USBOTGSS_UTMI_OTG_STATUS);
>>
>> utmi_mode = of_get_property(node, "utmi-mode", &size);
>> @@ -354,6 +362,8 @@ err1:
>> static int __devexit dwc3_omap_remove(struct platform_device *pdev)
>> {
>> device_for_each_child(&pdev->dev, NULL, dwc3_remove_core);
>> + pm_runtime_put(&pdev->dev);
>> + pm_runtime_disable(&pdev->dev);
>
> You're going to disable pm_runtime here, so it's better to use
> pm_runtime_put_sync(), I guess ??
sure. Will post a patch fixing it.
Thanks
Kishon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/