Re: mlx4_en_alloc_frag allocation failures

[Shawn Bohrer]

On Fri, Sep 28, 2012 at 05:50:08PM +0200, Eric Dumazet wrote:
> On Fri, 2012-09-28 at 10:14 -0500, Shawn Bohrer wrote:
> > We've got a new application that is receiving UDP multicast data using
> > AF_PACKET and writing out the packets in a custom format to disk.  The
> > packet rates are bursty, but it seems to be roughly 100 Mbps on
> > average for 1 minute periods.  With this application running all day
> > we get a lot of these messages:
> > 
> > [1298269.103034] kswapd1: page allocation failure: order:2, mode:0x4020
> > [1298269.103038] Pid: 80, comm: kswapd1 Not tainted 3.4.9-2.rgm.fc16.x86_64 #1
> > [1298269.103040] Call Trace:
> > [1298269.103041]  <IRQ>  [<ffffffff810db746>] warn_alloc_failed+0xf6/0x160
> > [1298269.103053]  [<ffffffff813c767d>] ? skb_copy_bits+0x16d/0x2c0
> > [1298269.103058]  [<ffffffff810e83a9>] ? wakeup_kswapd+0x69/0x160
> > [1298269.103060]  [<ffffffff810df188>] __alloc_pages_nodemask+0x6e8/0x930
> > [1298269.103064]  [<ffffffff81114316>] alloc_pages_current+0xb6/0x120
> > [1298269.103070]  [<ffffffffa00c142b>] mlx4_en_alloc_frag+0x16b/0x1e0 [mlx4_en]
> > [1298269.103073]  [<ffffffffa00c18a0>] mlx4_en_complete_rx_desc+0x120/0x1d0 [mlx4_en]
> > [1298269.103076]  [<ffffffffa00c27d4>] mlx4_en_process_rx_cq+0x584/0x700 [mlx4_en]
> > [1298269.103079]  [<ffffffffa00c29ef>] mlx4_en_poll_rx_cq+0x3f/0x80 [mlx4_en]
> > [1298269.103083]  [<ffffffff813d6569>] net_rx_action+0x119/0x210
> > [1298269.103086]  [<ffffffff8103c690>] __do_softirq+0xb0/0x220
> > [1298269.103090]  [<ffffffff8109911d>] ? handle_irq_event+0x4d/0x70
> > [1298269.103095]  [<ffffffff8148e30c>] call_softirq+0x1c/0x30
> > [1298269.103100]  [<ffffffff81003ef5>] do_softirq+0x55/0x90
> > [1298269.103101]  [<ffffffff8103ca65>] irq_exit+0x75/0x80
> > [1298269.103103]  [<ffffffff8148e853>] do_IRQ+0x63/0xe0
> > [1298269.103107]  [<ffffffff81485667>] common_interrupt+0x67/0x67
> > [1298269.103108]  <EOI>  [<ffffffff8148523f>] ? _raw_spin_unlock_irqrestore+0xf/0x20
> > [1298269.103113]  [<ffffffff811184b1>] compaction_alloc+0x361/0x3f0
> > [1298269.103115]  [<ffffffff810e29b7>] ? pagevec_lru_move_fn+0xd7/0xf0
> > [1298269.103118]  [<ffffffff81123d19>] migrate_pages+0xa9/0x470
> > [1298269.103120]  [<ffffffff81118150>] ? perf_trace_mm_compaction_migratepages+0xd0/0xd0
> > [1298269.103122]  [<ffffffff81118abb>] compact_zone+0x4cb/0x910
> > [1298269.103124]  [<ffffffff8111904b>] __compact_pgdat+0x14b/0x190
> > [1298269.103125]  [<ffffffff8111931d>] compact_pgdat+0x2d/0x30
> > [1298269.103129]  [<ffffffff810f32b9>] ? fragmentation_index+0x19/0x70
> > [1298269.103131]  [<ffffffff810eb15f>] balance_pgdat+0x6ef/0x710
> > [1298269.103133]  [<ffffffff810eb2ca>] kswapd+0x14a/0x390
> > [1298269.103136]  [<ffffffff810567c0>] ? add_wait_queue+0x60/0x60
> > [1298269.103138]  [<ffffffff810eb180>] ? balance_pgdat+0x710/0x710
> > [1298269.103140]  [<ffffffff81055e93>] kthread+0x93/0xa0
> > [1298269.103142]  [<ffffffff8148e214>] kernel_thread_helper+0x4/0x10
> > [1298269.103144]  [<ffffffff81055e00>] ? kthread_worker_fn+0x140/0x140
> > [1298269.103146]  [<ffffffff8148e210>] ? gs_change+0xb/0xb
> > 
> > The kernel is based on a Fedora 16 kernel and actually has the 3.4.10
> > patches applied.  I can easily test patches or different kernels.
> > 
> > I'm mostly wondering if there is anything that can be done about these
> > failures?  It appears that these failures have to do with handling
> > fragmented IP frames, but the majority of the packets this machines
> > should not be fragmented (there are probably some that are).
> > 
> > From a memory management point of view the system has 48GB of RAM, and
> > typically 44GB of that is page cache.  The dirty pages seem to hover
> > around 5-6MB and the filesystem/disks don't seem to have any problems
> > keeping up with writing out the data.
> 
> What is the value of /proc/sys/vm/min_free_kbytes ?

$ cat /proc/sys/vm/min_free_kbytes
90112

--
Shawn

-- 

---------------------------------------------------------------
This email, along with any attachments, is confidential. If you 
believe you received this message in error, please contact the 
sender immediately and delete all copies of the message.  
Thank you.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/