Re: [PATCH 24/25] MIPS: Alchemy: use the OHCI platform driver

[Manuel Lauss]

On Wed, Oct 3, 2012 at 5:03 PM, Florian Fainelli <florian@xxxxxxxxxxx> wrote:
> This also greatly simplifies the power_{on,off} callbacks and make them
> work on platform device id instead of checking the OHCI controller base
> address like what was done in ohci-au1xxx.c.
>
> Signed-off-by: Florian Fainelli <florian@xxxxxxxxxxx>
> ---
>  arch/mips/alchemy/common/platform.c |   31 +++++++++++++++++++++++++++++++
>  1 file changed, 31 insertions(+)
>
> diff --git a/arch/mips/alchemy/common/platform.c b/arch/mips/alchemy/common/platform.c
> index 57335a2..cd12458 100644
> --- a/arch/mips/alchemy/common/platform.c
> +++ b/arch/mips/alchemy/common/platform.c
> @@ -18,6 +18,7 @@
>  #include <linux/serial_8250.h>
>  #include <linux/slab.h>
>  #include <linux/usb/ehci_pdriver.h>
> +#include <linux/usb/ohci_pdriver.h>
>
>  #include <asm/mach-au1x00/au1000.h>
>  #include <asm/mach-au1x00/au1xxx_dbdma.h>
> @@ -142,6 +143,34 @@ static struct usb_ehci_pdata alchemy_ehci_pdata = {
>         .power_suspend          = alchemy_ehci_power_off,
>  };
>
> +/* Power on callback for the ohci platform driver */
> +static int alchemy_ohci_power_on(struct platform_device *pdev)
> +{
> +       int unit;
> +
> +       unit = (pdev->id == 1) ?
> +               ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
> +
> +       return alchemy_usb_control(unit, 1);
> +}
> +
> +/* Power off/suspend callback for the ohci platform driver */
> +static void alchemy_ohci_power_off(struct platform_device *pdev)
> +{
> +       int unit;
> +
> +       unit = (pdev->id == 1) ?
> +               ALCHEMY_USB_OHCI1 : ALCHEMY_USB_OHCI0;
> +
> +       alchemy_usb_control(unit, 0);
> +}
> +
> +static struct usb_ohci_pdata alchemy_ohci_pdata = {
> +       .power_on               = alchemy_ohci_power_on,
> +       .power_off              = alchemy_ohci_power_off,
> +       .power_suspend          = alchemy_ohci_power_off,
> +};
> +
>  static unsigned long alchemy_ohci_data[][2] __initdata = {
>         [ALCHEMY_CPU_AU1000] = { AU1000_USB_OHCI_PHYS_ADDR, AU1000_USB_HOST_INT },
>         [ALCHEMY_CPU_AU1500] = { AU1000_USB_OHCI_PHYS_ADDR, AU1500_USB_HOST_INT },
> @@ -192,6 +221,7 @@ static void __init alchemy_setup_usb(int ctype)
>         pdev->name = "au1xxx-ohci";

Should be "ohci-platform" (2x).  With this change USB works on all my
Alchemy boards.
I'd also suggest to move drivers/usb/host/alchemy-common.c to
arch/mips/alchemy/common/usb.c.
(same for octeon2-common.c)

Manuel
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/