Re: [PATCH] ARM: davinci: dm644x: fix out range signal for ED

[Prabhakar Lad]

Hi Sekhar,

On Wed, Oct 3, 2012 at 4:08 PM, Sekhar Nori <nsekhar@xxxxxx> wrote:
> On 10/3/2012 12:05 PM, Prabhakar wrote:
>> From: Lad, Prabhakar <prabhakar.lad@xxxxxx>
>>
>> while testing display on dm644x, for ED out-range signals
>> was observed. This patch fixes appropriate clock setting
>> for ED.
>
> Can you please clarify what you mean by "out range signal"? Are there
> any user visible artifacts on the display? What was the clock being
> provided earlier and what is the value after this patch?
>
> Also, is the issue severe enough that this patch should be applied to
> stable tree as well?
>
Ideally a clock of 54Mhz is required for  enhanced definition to
work, which it was actually set to but while testing I noticed
out-of-range signal. The out-of-range signal is often caused
when the field rate is above the rate that the television will handle.
When this is the case the TV or monitor displays "Out-Of-Range Signal".

Reducing the clock fixed it. now the clock is set to 27Mhz.

Regards,
--Prabhakar

> Thanks,
> Sekhar
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/