[PATCH V7 10/15] MIPS: Loongson: Add Loongson-3 Kconfig options

[Huacai Chen]

Added Kconfig options include: Loongson-3 CPU and machine definition,
CPU cache features, UEFI-like firmware interface, HT-linked PCI, and
big memory support.

Signed-off-by: Huacai Chen <chenhc@xxxxxxxxxx>
Signed-off-by: Hongliang Tao <taohl@xxxxxxxxxx>
Signed-off-by: Hua Yan <yanh@xxxxxxxxxx>
---
 arch/mips/Kconfig          |   26 ++++++++++++++++++++++
 arch/mips/loongson/Kconfig |   52 ++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 78 insertions(+), 0 deletions(-)

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index faf6528..647dbe2 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1572,6 +1572,16 @@ config CPU_LOONGSON2
 	select CPU_SUPPORTS_64BIT_KERNEL
 	select CPU_SUPPORTS_HIGHMEM
 
+config CPU_LOONGSON3
+	bool "Loongson 3 CPU"
+	depends on SYS_HAS_CPU_LOONGSON3
+	select CPU_SUPPORTS_32BIT_KERNEL
+	select CPU_SUPPORTS_64BIT_KERNEL
+	select CPU_SUPPORTS_HIGHMEM
+	help
+		The Loongson 3 processor implements the MIPS III instruction set
+		with many extensions.
+
 config CPU_LOONGSON1
 	bool
 	select CPU_MIPS32
@@ -1598,6 +1608,11 @@ config SYS_HAS_CPU_LOONGSON2F
 	select CPU_SUPPORTS_ADDRWINCFG if 64BIT
 	select CPU_SUPPORTS_UNCACHED_ACCELERATED
 
+config SYS_HAS_CPU_LOONGSON3
+	bool
+	select CPU_SUPPORTS_CPUFREQ
+	select CPU_SUPPORTS_COHERENT_CACHE
+
 config SYS_HAS_CPU_LOONGSON1B
 	bool
 
@@ -1735,6 +1750,8 @@ config CPU_SUPPORTS_HUGEPAGES
 	bool
 config CPU_SUPPORTS_UNCACHED_ACCELERATED
 	bool
+config CPU_SUPPORTS_COHERENT_CACHE
+	bool
 config MIPS_PGD_C0_CONTEXT
 	bool
 	default y if 64BIT && CPU_MIPSR2
@@ -2400,6 +2417,15 @@ config PCI
 	  your box. Other bus systems are ISA, EISA, or VESA. If you have PCI,
 	  say Y, otherwise N.
 
+config HT_PCI
+	bool "Support for HT-linked PCI"
+	select PCI_DOMAINS
+	help
+	  Loongson family machines use Hyper-Transport bus for inter-core
+	  connection and device connection. The PCI bus is a subordinate
+	  linked at HT. Choose Y unless you are using Loongson 2E/2F based
+	  machines.
+
 config PCI_DOMAINS
 	bool
 
diff --git a/arch/mips/loongson/Kconfig b/arch/mips/loongson/Kconfig
index 263beb9..dd951b8 100644
--- a/arch/mips/loongson/Kconfig
+++ b/arch/mips/loongson/Kconfig
@@ -59,6 +59,33 @@ config LEMOTE_MACH2F
 
 	  These family machines include fuloong2f mini PC, yeeloong2f notebook,
 	  LingLoong allinone PC and so forth.
+
+config LEMOTE_MACH3A
+	bool "Lemote Loongson 3A family machines"
+	select ARCH_SPARSEMEM_ENABLE
+	select GENERIC_ISA_DMA_SUPPORT_BROKEN
+	select GENERIC_HARDIRQS_NO__DO_IRQ
+	select BOOT_ELF32
+	select BOARD_SCACHE
+	select CSRC_R4K
+	select CEVT_R4K
+	select CPU_HAS_WB
+	select HW_HAS_PCI
+	select ISA
+	select I8259
+	select IRQ_CPU
+	select SYS_HAS_CPU_LOONGSON3
+	select SYS_HAS_EARLY_PRINTK
+	select SYS_SUPPORTS_SMP
+	select SYS_SUPPORTS_32BIT_KERNEL
+	select SYS_SUPPORTS_64BIT_KERNEL
+	select SYS_SUPPORTS_HIGHMEM
+	select SYS_SUPPORTS_LITTLE_ENDIAN
+	select LOONGSON_MC146818
+	select UEFI_FIRMWARE_INTERFACE
+	help
+		Lemote Loongson 3A family machines utilize the 3A revision of
+		Loongson processor and RS780/SBX00 chipset.
 endchoice
 
 config CS5536
@@ -86,8 +113,33 @@ config LOONGSON_UART_BASE
 	default y
 	depends on EARLY_PRINTK || SERIAL_8250
 
+config LOONGSON_BIGMEM
+	bool "Soft IOMMU Support for Big Memory (>4GB)"
+	depends on CPU_LOONGSON3
+	select SWIOTLB
+	select ZONE_DMA32
+
+config IOMMU_HELPER
+	bool
+
+config NEED_SG_DMA_LENGTH
+	bool
+
+config SWIOTLB
+	bool
+	select IOMMU_HELPER
+	select NEED_SG_DMA_LENGTH
+	select NEED_DMA_MAP_STATE
+
 config LOONGSON_MC146818
 	bool
 	default n
 
+config ARCH_SPARSEMEM_ENABLE
+	bool
+	select SPARSEMEM_STATIC
+
+config UEFI_FIRMWARE_INTERFACE
+	bool
+
 endif # MACH_LOONGSON
-- 
1.7.7.3

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/