Re: [PATCH] mlx4: set carrier off after register netdev

[Ben Hutchings]

On Fri, 2012-10-05 at 11:28 -0700, Min Zhang wrote:
> ifconfig mlx4_en port reported RUNNING even though the link was down.
> 
> mlx4_en_init_netdev didn't initialize the dev operstate properly so
> the operstate stayed as default IF_OPER_UNKNOWN, then ifconfig treated
> the UNKNOWN as RUNNING state for backward compatiblity per RFC2863.
> 
> The fix calls netif_carrier_off which is supposed to set operstate
> after register_netdev. Calling it before register_netdev has no effect
> since the dev->state is still NETREG_UNINITIALIZED
> 
> Tested by removing the physical link signal to the mellanox 10G port,
> modprobe mlx4_en, then ifconfig up. Verify there is no RUNNING status.
[...]

This was supposed to be fixed by:

commit 8f4cccbbd92f2ad0ddbbc498ef7cee2a1c3defe9
Author: Ben Hutchings <bhutchings@xxxxxxxxxxxxxx>
Date:   Mon Aug 20 22:16:51 2012 +0100

    net: Set device operstate at registration time

Does that not work for mlx4_en, for some reason?

Ben.

-- 
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/