[ 027/108] [SCSI] hpsa: fix handling of protocol error

From: Ben Hutchings
Date: Sun Oct 07 2012 - 19:27:29 EST


3.2-stable review patch. If anyone has any objections, please let me know.

------------------

From: "Stephen M. Cameron" <scameron@xxxxxxxxxxxxxxxxxx>

commit 256d0eaac87da1e993190846064f339f4c7a63f5 upstream.

If a command status of CMD_PROTOCOL_ERR is received, this
information should be conveyed to the SCSI mid layer, not
dropped on the floor. CMD_PROTOCOL_ERR may be received
from the Smart Array for any commands destined for an external
RAID controller such as a P2000, or commands destined for tape
drives or CD/DVD-ROM drives, if for instance a cable is
disconnected. This mostly affects multipath configurations, as
disconnecting a cable on a non-multipath configuration is not
going to do anything good regardless of whether CMD_PROTOCOL_ERR
is handled correctly or not. Not handling CMD_PROTOCOL_ERR
correctly in a multipath configaration involving external RAID
controllers may cause data corruption, so this is quite a serious
bug. This bug should not normally cause a problem for direct
attached disk storage.

Signed-off-by: Stephen M. Cameron <scameron@xxxxxxxxxxxxxxxxxx>
Signed-off-by: James Bottomley <JBottomley@xxxxxxxxxxxxx>
Signed-off-by: Ben Hutchings <ben@xxxxxxxxxxxxxxx>
---
drivers/scsi/hpsa.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 796482b..2b4261c 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -1315,8 +1315,9 @@ static void complete_scsi_command(struct CommandList *cp)
}
break;
case CMD_PROTOCOL_ERR:
+ cmd->result = DID_ERROR << 16;
dev_warn(&h->pdev->dev, "cp %p has "
- "protocol error \n", cp);
+ "protocol error\n", cp);
break;
case CMD_HARDWARE_ERR:
cmd->result = DID_ERROR << 16;


--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/