Re: [PATCH 5/5] regulator: tps65090: add external control supportfor DCDC

[Laxman Dewangan]

On Tuesday 09 October 2012 11:58 AM, Mark Brown wrote:
> On Sat, Oct 06, 2012 at 08:47:51PM +0530, Laxman Dewangan wrote:
> > The TPS65090's DCDC outut can also be enable/disable through the
> > external digital input signal. Add support for enable/disable
> > either through register access via I2C or through external
> > control inputs. The external control inputs can be driven through
> > GPIOs also and hence adding support for passing the GPIO number.
> There's support for GPIO driven enable lines in the framework already,
> this driver should be able to use this happily, this sort of hardware is
> exactly the use case it was written for.

yes, I am using the gpio driven enable lines in the framework.
This patch does the some configuration in register to enable external
control and configure the regulator_config (fill gpio related stuff in 
config)  before registering
the regulator. There is no call of gpio libs from the driver.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/