[PATCH v3 2/2] x86, pci: Enable PCI INTx when MSI is disabled

[Takao Indoh]

This patch enables INTx if MSI is disabled in pcibios_enable_device().
In normal case interrupt disable bit in command register is 0b on boot
time, but in case of kdump, this bit may be 1b. It causes problems of
some drivers. At leaset I confirmed mptsas driver does not work in such
a case. This patch fix this problem.

Signed-off-by: Takao Indoh <indou.takao@xxxxxxxxxxxxxx>
---
 arch/x86/pci/common.c |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
index 720e973..2bb7ecc 100644
--- a/arch/x86/pci/common.c
+++ b/arch/x86/pci/common.c
@@ -615,8 +615,10 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
 	if ((err = pci_enable_resources(dev, mask)) < 0)
 		return err;
 
-	if (!pci_dev_msi_enabled(dev))
+	if (!pci_dev_msi_enabled(dev)) {
+		pci_intx(dev, true);
 		return pcibios_enable_irq(dev);
+	}
 	return 0;
 }
 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/