[ 46/84] PCI: Check P2P bridge for invalid secondary/subordinate range
From: Greg Kroah-Hartman
Date: Wed Oct 10 2012 - 22:13:54 EST
3.0-stable review patch. If anyone has any objections, please let me know.
------------------
From: Yinghai Lu <yinghai@xxxxxxxxxx>
commit 1965f66e7db08d1ebccd24a59043eba826cc1ce8 upstream.
For bridges with "secondary > subordinate", i.e., invalid bus number
apertures, we don't enumerate anything behind the bridge unless the
user specified "pci=assign-busses".
This patch makes us automatically try to reassign the downstream bus
numbers in this case (just for that bridge, not for all bridges as
"pci=assign-busses" does).
We don't discover all the devices on the Intel DP43BF motherboard
without this change (or "pci=assign-busses") because its BIOS configures
a bridge as:
pci 0000:00:1e.0: PCI bridge to [bus 20-08] (subtractive decode)
[bhelgaas: changelog, change message to dev_info]
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=18412
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=625754
Reported-by: Brian C. Huffman <bhuffman@xxxxxxxxx>
Reported-by: VL <vl.homutov@xxxxxxxxx>
Tested-by: VL <vl.homutov@xxxxxxxxx>
Signed-off-by: Yinghai Lu <yinghai@xxxxxxxxxx>
Signed-off-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
---
drivers/pci/probe.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -664,8 +664,10 @@ int __devinit pci_scan_bridge(struct pci
/* Check if setup is sensible at all */
if (!pass &&
- (primary != bus->number || secondary <= bus->number)) {
- dev_dbg(&dev->dev, "bus configuration invalid, reconfiguring\n");
+ (primary != bus->number || secondary <= bus->number ||
+ secondary > subordinate)) {
+ dev_info(&dev->dev, "bridge configuration invalid ([bus %02x-%02x]), reconfiguring\n",
+ secondary, subordinate);
broken = 1;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/