[PATCH 2/2] Staging: CSR: Fixed 41% of exceeding 80 characters problems on drv.c
From: Sangho Yi
Date: Sun Oct 14 2012 - 12:00:17 EST
I fixed 41% of exceeding 80 characters problems on drv.c.
Note that some long strings for printing messages still exceed 80
characters.
Signed-off-by: Sangho Yi <antiroot@xxxxxxxxx>
---
drivers/staging/csr/drv.c | 338 ++++++++++++++++++++++++---------------------
1 file changed, 181 insertions(+), 157 deletions(-)
diff --git a/drivers/staging/csr/drv.c b/drivers/staging/csr/drv.c
index baefcd2..627a113 100644
--- a/drivers/staging/csr/drv.c
+++ b/drivers/staging/csr/drv.c
@@ -43,23 +43,23 @@
#include "unifi_native.h"
/* Module parameter variables */
-int buswidth = 0; /* 0 means use default, values 1,4 */
-int sdio_clock = 50000; /* kHz */
+int buswidth = 0; /* 0 means use default, values 1,4 */
+int sdio_clock = 50000; /* kHz */
int unifi_debug = 0;
/* fw_init prevents f/w initialisation on error. */
int fw_init[MAX_UNIFI_DEVS] = {-1, -1};
int use_5g = 0;
-int led_mask = 0; /* 0x0c00 for dev-pc-1503c, dev-pc-1528a */
+int led_mask = 0; /* 0x0c00 for dev-pc-1503c, dev-pc-1528a */
int disable_hw_reset = 0;
int disable_power_control = 0;
-int enable_wol = UNIFI_WOL_OFF; /* 0 for none, 1 for SDIO IRQ, 2 for PIO */
+int enable_wol = UNIFI_WOL_OFF; /* 0 for none, 1 for SDIO IRQ, 2 for PIO */
#if (defined CSR_SUPPORT_SME) && (defined CSR_SUPPORT_WEXT)
int tl_80211d = (int)CSR_WIFI_SME_80211D_TRUST_LEVEL_MIB;
#endif
-int sdio_block_size = -1; /* Override SDIO block size */
-int sdio_byte_mode = 0; /* 0 for block mode + padding, 1 for byte mode */
+int sdio_block_size = -1; /* Override SDIO block size */
+int sdio_byte_mode = 0; /* 0 for block mode + padding, 1 for byte mode */
int coredump_max = CSR_WIFI_HIP_NUM_COREDUMP_BUFFERS;
-int run_bh_once = -1; /* Set for scheduled interrupt mode, -1 = default */
+int run_bh_once = -1; /* Set for scheduled interrupt mode, -1 = default */
int bh_priority = -1;
#ifdef CSR_WIFI_HIP_DEBUG_OFFLINE
#define UNIFI_LOG_HIP_SIGNALS_FILTER_BULKDATA (1 << 1)
@@ -90,47 +90,48 @@ module_param(bh_priority, int, S_IRUGO|S_IWUSR);
module_param(log_hip_signals, int, S_IRUGO|S_IWUSR);
#endif
-MODULE_PARM_DESC(buswidth, "SDIO bus width (0=default), set 1 for 1-bit or 4 for 4-bit mode");
+MODULE_PARM_DESC(buswidth,
+ "SDIO bus width (0=default), set 1 for 1-bit or 4 for 4-bit mode");
MODULE_PARM_DESC(sdio_clock, "SDIO bus frequency in kHz, (default = 50 MHz)");
MODULE_PARM_DESC(unifi_debug, "Diagnostic reporting level");
MODULE_PARM_DESC(fw_init, "Set to 0 to prevent f/w initialization on error");
MODULE_PARM_DESC(use_5g, "Use the 5G (802.11a) radio band");
MODULE_PARM_DESC(led_mask, "LED mask flags");
MODULE_PARM_DESC(disable_hw_reset, "Set to 1 to disable hardware reset");
-MODULE_PARM_DESC(disable_power_control, "Set to 1 to disable SDIO power control");
-MODULE_PARM_DESC(enable_wol, "Enable wake-on-wlan function 0=off, 1=SDIO, 2=PIO");
+MODULE_PARM_DESC(disable_power_control,
+ "Set to 1 to disable SDIO power control");
+MODULE_PARM_DESC(enable_wol,
+ "Enable wake-on-wlan function 0=off, 1=SDIO, 2=PIO");
#if (defined CSR_SUPPORT_SME) && (defined CSR_SUPPORT_WEXT)
MODULE_PARM_DESC(tl_80211d, "802.11d Trust Level (1-6, default = 5)");
#endif
MODULE_PARM_DESC(sdio_block_size, "Set to override SDIO block size");
MODULE_PARM_DESC(sdio_byte_mode, "Set to 1 for byte mode SDIO");
-MODULE_PARM_DESC(coredump_max, "Number of chip mini-coredump buffers to allocate");
+MODULE_PARM_DESC(coredump_max,
+ "Number of chip mini-coredump buffers to allocate");
MODULE_PARM_DESC(run_bh_once, "Run BH only when firmware interrupts");
MODULE_PARM_DESC(bh_priority, "Modify the BH thread priority");
#ifdef CSR_WIFI_HIP_DEBUG_OFFLINE
-MODULE_PARM_DESC(log_hip_signals, "Set to 1 to enable HIP signal offline logging");
+MODULE_PARM_DESC(log_hip_signals,
+ "Set to 1 to enable HIP signal offline logging");
#endif
/* Callback for event logging to UDI clients */
static void udi_log_event(ul_client_t *client,
- const u8 *signal, int signal_len,
- const bulk_data_param_t *bulkdata,
- int dir);
+ const u8 *signal, int signal_len,
+ const bulk_data_param_t *bulkdata, int dir);
static void udi_set_log_filter(ul_client_t *pcli,
- unifiio_filter_t *udi_filter);
-
+ unifiio_filter_t *udi_filter);
/* Mutex to protect access to priv->sme_cli */
DEFINE_SEMAPHORE(udi_mutex);
-s32 CsrHipResultToStatus(CsrResult csrResult)
-{
+s32 CsrHipResultToStatus(CsrResult csrResult) {
s32 r = -EIO;
- switch (csrResult)
- {
+ switch (csrResult) {
case CSR_RESULT_SUCCESS:
r = 0;
break;
@@ -156,52 +157,51 @@ s32 CsrHipResultToStatus(CsrResult csrResult)
r = -EIO;
break;
default:
- /*unifi_warning(card->ospriv, "CsrHipResultToStatus: Unrecognised csrResult error code: %d\n", csrResult);*/
+ /*unifi_warning(card->ospriv,
+ * "CsrHipResultToStatus: Unrecognised csrResult
+ * error code: %d\n", csrResult);*/
r = -EIO;
}
return r;
}
-static const char*
-trace_putest_cmdid(unifi_putest_command_t putest_cmd)
-{
- switch (putest_cmd)
- {
- case UNIFI_PUTEST_START:
- return "START";
- case UNIFI_PUTEST_STOP:
- return "STOP";
- case UNIFI_PUTEST_SET_SDIO_CLOCK:
- return "SET CLOCK";
- case UNIFI_PUTEST_CMD52_READ:
- return "CMD52R";
- case UNIFI_PUTEST_CMD52_BLOCK_READ:
- return "CMD52BR";
- case UNIFI_PUTEST_CMD52_WRITE:
- return "CMD52W";
- case UNIFI_PUTEST_DL_FW:
- return "D/L FW";
- case UNIFI_PUTEST_DL_FW_BUFF:
- return "D/L FW BUFFER";
- case UNIFI_PUTEST_COREDUMP_PREPARE:
- return "PREPARE COREDUMP";
- case UNIFI_PUTEST_GP_READ16:
- return "GP16R";
- case UNIFI_PUTEST_GP_WRITE16:
- return "GP16W";
- default:
- return "ERROR: unrecognised command";
+static const char* trace_putest_cmdid(unifi_putest_command_t putest_cmd) {
+ switch (putest_cmd) {
+ case UNIFI_PUTEST_START:
+ return "START";
+ case UNIFI_PUTEST_STOP:
+ return "STOP";
+ case UNIFI_PUTEST_SET_SDIO_CLOCK:
+ return "SET CLOCK";
+ case UNIFI_PUTEST_CMD52_READ:
+ return "CMD52R";
+ case UNIFI_PUTEST_CMD52_BLOCK_READ:
+ return "CMD52BR";
+ case UNIFI_PUTEST_CMD52_WRITE:
+ return "CMD52W";
+ case UNIFI_PUTEST_DL_FW:
+ return "D/L FW";
+ case UNIFI_PUTEST_DL_FW_BUFF:
+ return "D/L FW BUFFER";
+ case UNIFI_PUTEST_COREDUMP_PREPARE:
+ return "PREPARE COREDUMP";
+ case UNIFI_PUTEST_GP_READ16:
+ return "GP16R";
+ case UNIFI_PUTEST_GP_WRITE16:
+ return "GP16W";
+ default:
+ return "ERROR: unrecognised command";
}
- }
+}
#ifdef CSR_WIFI_HIP_DEBUG_OFFLINE
-int uf_register_hip_offline_debug(unifi_priv_t *priv)
-{
+int uf_register_hip_offline_debug(unifi_priv_t *priv) {
ul_client_t *udi_cli;
int i;
- udi_cli = ul_register_client(priv, CLI_USING_WIRE_FORMAT, udi_log_event);
+ udi_cli = ul_register_client(priv, CLI_USING_WIRE_FORMAT,
+ udi_log_event);
if (udi_cli == NULL) {
/* Too many clients already using this device */
unifi_error(priv, "Too many UDI clients already open\n");
@@ -222,11 +222,9 @@ int uf_register_hip_offline_debug(unifi_priv_t *priv)
return 0;
}
-int uf_unregister_hip_offline_debug(unifi_priv_t *priv)
-{
+int uf_unregister_hip_offline_debug(unifi_priv_t *priv) {
ul_client_t *udi_cli = priv->logging_client;
- if (udi_cli == NULL)
- {
+ if (udi_cli == NULL) {
unifi_error(priv, "Unknown HIP client unregister request\n");
return -ERANGE;
}
@@ -244,7 +242,6 @@ int uf_unregister_hip_offline_debug(unifi_priv_t *priv)
}
#endif
-
/*
* ---------------------------------------------------------------------------
* unifi_open
@@ -259,9 +256,7 @@ int uf_unregister_hip_offline_debug(unifi_priv_t *priv)
* Linux error code.
* ---------------------------------------------------------------------------
*/
-static int
-unifi_open(struct inode *inode, struct file *file)
-{
+static int unifi_open(struct inode *inode, struct file *file) {
int devno;
unifi_priv_t *priv;
ul_client_t *udi_cli;
@@ -283,9 +278,11 @@ unifi_open(struct inode *inode, struct file *file)
}
/* Register this instance in the client's list. */
- /* The minor number determines the nature of the client (Unicli or SME). */
+ /* The minor number determines the nature of the client
+ * (Unicli or SME). */
if (MINOR(inode->i_rdev) & 0x1) {
- udi_cli = ul_register_client(priv, CLI_USING_WIRE_FORMAT, udi_log_event);
+ udi_cli = ul_register_client(priv, CLI_USING_WIRE_FORMAT,
+ udi_log_event);
if (udi_cli == NULL) {
/* Too many clients already using this device */
unifi_error(priv, "Too many clients already open\n");
@@ -293,7 +290,8 @@ unifi_open(struct inode *inode, struct file *file)
func_exit();
return -ENOSPC;
}
- unifi_trace(priv, UDBG1, "Client is registered to /dev/unifiudi%d\n", devno);
+ unifi_trace(priv, UDBG1,
+ "Client is registered to /dev/unifiudi%d\n", devno);
} else {
/*
* Even-numbered device nodes are the control application.
@@ -317,13 +315,11 @@ unifi_open(struct inode *inode, struct file *file)
#ifdef CSR_SUPPORT_SME
udi_cli = ul_register_client(priv,
- CLI_USING_WIRE_FORMAT | CLI_SME_USERSPACE,
- sme_log_event);
+ CLI_USING_WIRE_FORMAT | CLI_SME_USERSPACE,
+ sme_log_event);
#else
/* Config client for native driver */
- udi_cli = ul_register_client(priv,
- 0,
- sme_native_log_event);
+ udi_cli = ul_register_client(priv, 0, sme_native_log_event);
#endif
if (udi_cli == NULL) {
/* Too many clients already using this device */
@@ -340,17 +336,16 @@ unifi_open(struct inode *inode, struct file *file)
* This is the SME userspace helper or unifi_manager.
* Not used in the SME embedded version.
*/
- unifi_trace(priv, UDBG1, "SME client (id:%d s:0x%X) is registered\n",
- udi_cli->client_id, udi_cli->sender_id);
+ unifi_trace(priv, UDBG1,
+ "SME client (id:%d s:0x%X) is registered\n",
+ udi_cli->client_id, udi_cli->sender_id);
/* Store the SME UniFi Linux Client */
if (priv->sme_cli == NULL) {
priv->sme_cli = udi_cli;
}
-
up(&udi_mutex);
}
-
/*
* Store the pointer to the client.
* All char driver's entry points will pass this pointer.
@@ -362,9 +357,7 @@ unifi_open(struct inode *inode, struct file *file)
} /* unifi_open() */
-static int
-unifi_release(struct inode *inode, struct file *filp)
-{
+static int unifi_release(struct inode *inode, struct file *filp) {
ul_client_t *udi_cli = (void*)filp->private_data;
int devno;
unifi_priv_t *priv;
@@ -373,23 +366,25 @@ unifi_release(struct inode *inode, struct file *filp)
priv = uf_find_instance(udi_cli->instance);
if (!priv) {
- unifi_error(priv, "unifi_close: instance for device not found\n");
+ unifi_error(priv,
+ "unifi_close: instance for device not found\n");
return -ENODEV;
}
devno = MINOR(inode->i_rdev) >> 1;
- /* Even device nodes are the config client (i.e. SME or unifi_manager) */
+ /* Even device nodes are the config client
+ * (i.e. SME or unifi_manager) */
if ((MINOR(inode->i_rdev) & 0x1) == 0) {
-
if (priv->sme_cli != udi_cli) {
- unifi_notice(priv, "Surprise closing config device: not the sme client\n");
+ unifi_notice(priv,
+ "Surprise closing config device: not the sme client\n");
}
unifi_notice(priv, "SME client close (unifi%d)\n", devno);
/*
- * Clear sme_cli before calling unifi_sys_... so it doesn't try to
- * queue a reply to the (now gone) SME.
+ * Clear sme_cli before calling unifi_sys_...
+ * so it doesn't try to queue a reply to the (now gone) SME.
*/
down(&udi_mutex);
priv->sme_cli = NULL;
@@ -398,24 +393,27 @@ unifi_release(struct inode *inode, struct file *filp)
#ifdef CSR_SME_USERSPACE
/* Power-down when config client closes */
{
- CsrWifiRouterCtrlWifiOffReq req = {{CSR_WIFI_ROUTER_CTRL_HIP_REQ, 0, 0, 0, NULL}};
+ CsrWifiRouterCtrlWifiOffReq req =
+ {{CSR_WIFI_ROUTER_CTRL_HIP_REQ, 0, 0, 0, NULL}};
CsrWifiRouterCtrlWifiOffReqHandler(priv, &req.common);
}
uf_sme_deinit(priv);
- /* It is possible that a blocking SME request was made from another process
- * which did not get read by the SME before the WifiOffReq.
- * So check for a pending request which will go unanswered and cancel
- * the wait for event. As only one blocking request can be in progress at
- * a time, up to one event should be completed.
- */
- uf_sme_cancel_request(priv, 0);
+ /* It is possible that a blocking SME request was made from
+ * another process which did not get read by the SME before
+ * the WifiOffReq.
+ * So check for a pending request which will go unanswered
+ * and cancel the wait for event. As only one blocking request
+ * can be in progress at a time, up to one event should be
+ * completed.
+ */
+ uf_sme_cancel_request(priv, 0);
#endif /* CSR_SME_USERSPACE */
} else {
-
- unifi_trace(priv, UDBG2, "UDI client close (unifiudi%d)\n", devno);
+ unifi_trace(priv, UDBG2, "UDI client close (unifiudi%d)\n",
+ devno);
/* If the pointer matches the logging client, stop logging. */
down(&priv->udi_logging_mutex);
@@ -438,7 +436,6 @@ unifi_release(struct inode *inode, struct file *filp)
} /* unifi_release() */
-
/*
* ---------------------------------------------------------------------------
* unifi_read
@@ -455,9 +452,8 @@ unifi_release(struct inode *inode, struct file *filp)
* number of bytes read or an error code on failure
* ---------------------------------------------------------------------------
*/
-static ssize_t
-unifi_read(struct file *filp, char *p, size_t len, loff_t *poff)
-{
+static ssize_t unifi_read(struct file *filp, char *p,
+ size_t len, loff_t *poff) {
ul_client_t *pcli = (void*)filp->private_data;
unifi_priv_t *priv;
udi_log_t *logptr = NULL;
@@ -480,14 +476,15 @@ unifi_read(struct file *filp, char *p, size_t len, loff_t *poff)
if (list_empty(&pcli->udi_log)) {
if (filp->f_flags & O_NONBLOCK) {
- /* Non-blocking - just return if the udi_log is empty */
+ /* Non-blocking -
+ * just return if the udi_log is empty */
return 0;
} else {
/* Blocking - wait on the UDI wait queue */
if (wait_event_interruptible(pcli->udi_wq,
- !list_empty(&pcli->udi_log)))
- {
- unifi_error(priv, "unifi_read: wait_event_interruptible failed.");
+ !list_empty(&pcli->udi_log))) {
+ unifi_error(priv,
+ "unifi_read: wait_event_interruptible failed.");
return -ERESTARTSYS;
}
}
@@ -512,7 +509,8 @@ unifi_read(struct file *filp, char *p, size_t len, loff_t *poff)
msgptr = &logptr->msg;
msglen = msgptr->length;
if (msglen > len) {
- printk(KERN_WARNING "truncated read to %d actual msg len is %lu\n", msglen, (long unsigned int)len);
+ printk(KERN_WARNING "truncated read to %d actual msg len is %lu\n",
+ msglen, (long unsigned int)len);
msglen = len;
}
@@ -533,7 +531,6 @@ unifi_read(struct file *filp, char *p, size_t len, loff_t *poff)
} /* unifi_read() */
-
/*
* ---------------------------------------------------------------------------
* udi_send_signal_unpacked
@@ -567,9 +564,9 @@ udi_send_signal_unpacked(unifi_priv_t *priv, unsigned char* data, uint data_len)
/* Number of bytes in the signal */
signal_size = SigGetSize(sigptr);
if (!signal_size || (signal_size > data_len)) {
- unifi_error(priv, "unifi_sme_mlme_req - Invalid signal 0x%x size should be %d bytes\n",
- sigptr->SignalPrimitiveHeader.SignalId,
- signal_size);
+ unifi_error(priv,
+ "unifi_sme_mlme_req - Invalid signal 0x%x size should be %d bytes\n",
+ sigptr->SignalPrimitiveHeader.SignalId, signal_size);
return -EINVAL;
}
bytecount = signal_size;
@@ -577,23 +574,28 @@ udi_send_signal_unpacked(unifi_priv_t *priv, unsigned char* data, uint data_len)
/* Get a pointer to the information of the first data reference */
datarefptr = (CSR_DATAREF*)&sigptr->u;
- /* Initialize the offset in the data buffer, bulk data is right after the signal. */
+ /* Initialize the offset in the data buffer,
+ * bulk data is right after the signal. */
bulk_data_offset = signal_size;
- /* store the references and the size of the bulk data to the bulkdata structure */
+ /* store the references and the size of the bulk data
+ * to the bulkdata structure */
for (i = 0; i < UNIFI_MAX_DATA_REFERENCES; i++) {
/* the length of the bulk data is in the signal */
if ((datarefptr+i)->DataLength) {
void *dest;
- csrResult = unifi_net_data_malloc(priv, &bulk_data.d[i], (datarefptr+i)->DataLength);
+ csrResult = unifi_net_data_malloc(priv,
+ &bulk_data.d[i], (datarefptr+i)->DataLength);
if (csrResult != CSR_RESULT_SUCCESS) {
- unifi_error(priv, "udi_send_signal_unpacked: failed to allocate request_data.\n");
+ unifi_error(priv,
+ "udi_send_signal_unpacked: failed to allocate request_data.\n");
return -EIO;
}
dest = (void*)bulk_data.d[i].os_data_ptr;
- memcpy(dest, data + bulk_data_offset, bulk_data.d[i].data_length);
+ memcpy(dest, data + bulk_data_offset,
+ bulk_data.d[i].data_length);
} else {
bulk_data.d[i].data_length = 0;
}
@@ -604,12 +606,14 @@ udi_send_signal_unpacked(unifi_priv_t *priv, unsigned char* data, uint data_len)
}
- unifi_trace(priv, UDBG3, "SME Send: signal 0x%.4X\n", sigptr->SignalPrimitiveHeader.SignalId);
+ unifi_trace(priv, UDBG3, "SME Send: signal 0x%.4X\n",
+ sigptr->SignalPrimitiveHeader.SignalId);
/* Send the signal. */
r = ul_send_signal_unpacked(priv, sigptr, &bulk_data);
if (r < 0) {
- unifi_error(priv, "udi_send_signal_unpacked: send failed (%d)\n", r);
+ unifi_error(priv,
+ "udi_send_signal_unpacked: send failed (%d)\n", r);
for(i=0;i<UNIFI_MAX_DATA_REFERENCES;i++) {
if(bulk_data.d[i].data_length != 0) {
unifi_net_data_free(priv, &bulk_data.d[i]);
@@ -643,9 +647,8 @@ udi_send_signal_unpacked(unifi_priv_t *priv, unsigned char* data, uint data_len)
* must use the wire formatted structures.
* ---------------------------------------------------------------------------
*/
-static int
-udi_send_signal_raw(unifi_priv_t *priv, unsigned char *buf, int buflen)
-{
+static int udi_send_signal_raw(unifi_priv_t *priv, unsigned char *buf,
+ int buflen) {
int signal_size;
int sig_id;
bulk_data_param_t data_ptrs;
@@ -666,13 +669,15 @@ udi_send_signal_raw(unifi_priv_t *priv, unsigned char *buf, int buflen)
signal_size -= GET_PACKED_DATAREF_LEN(buf, 0);
signal_size -= GET_PACKED_DATAREF_LEN(buf, 1);
if ((signal_size <= 0) || (signal_size > buflen)) {
- unifi_error(priv, "udi_send_signal_raw - Couldn't find length of signal 0x%x\n",
- sig_id);
+ unifi_error(priv,
+ "udi_send_signal_raw - Couldn't find length of signal 0x%x\n",
+ sig_id);
func_exit();
return -EINVAL;
}
- unifi_trace(priv, UDBG2, "udi_send_signal_raw: signal 0x%.4X len:%d\n",
- sig_id, signal_size);
+ unifi_trace(priv, UDBG2,
+ "udi_send_signal_raw: signal 0x%.4X len:%d\n",
+ sig_id, signal_size);
/* Zero the data ref arrays */
memset(&data_ptrs, 0, sizeof(data_ptrs));
@@ -684,17 +689,19 @@ udi_send_signal_raw(unifi_priv_t *priv, unsigned char *buf, int buflen)
num_data_refs = 0;
bytecount = signal_size;
- for (i = 0; i < UNIFI_MAX_DATA_REFERENCES; ++i)
- {
+ for (i = 0; i < UNIFI_MAX_DATA_REFERENCES; ++i) {
unsigned int len = GET_PACKED_DATAREF_LEN(buf, i);
- unifi_trace(priv, UDBG3, "udi_send_signal_raw: data_ref length = %d\n", len);
+ unifi_trace(priv, UDBG3,
+ "udi_send_signal_raw: data_ref length = %d\n", len);
if (len != 0) {
void *dest;
- csrResult = unifi_net_data_malloc(priv, &data_ptrs.d[i], len);
+ csrResult = unifi_net_data_malloc(priv,
+ &data_ptrs.d[i], len);
if (csrResult != CSR_RESULT_SUCCESS) {
- unifi_error(priv, "udi_send_signal_raw: failed to allocate request_data.\n");
+ unifi_error(priv,
+ "udi_send_signal_raw: failed to allocate request_data.\n");
return -EIO;
}
@@ -707,20 +714,24 @@ udi_send_signal_raw(unifi_priv_t *priv, unsigned char *buf, int buflen)
data_ptrs.d[i].data_length = len;
}
- unifi_trace(priv, UDBG3, "Queueing signal 0x%.4X from UDI with %u data refs\n",
- sig_id,
- num_data_refs);
+ unifi_trace(priv, UDBG3,
+ "Queueing signal 0x%.4X from UDI with %u data refs\n",
+ sig_id, num_data_refs);
if (bytecount > buflen) {
- unifi_error(priv, "udi_send_signal_raw: Not enough data (%d instead of %d)\n", buflen, bytecount);
+ unifi_error(priv,
+ "udi_send_signal_raw: Not enough data (%d instead of %d)\n",
+ buflen, bytecount);
func_exit();
return -EINVAL;
}
- /* Send the signal calling the function that uses the wire-formatted signals. */
+ /* Send the signal calling the function that uses
+ * the wire-formatted signals. */
r = ul_send_signal_raw(priv, buf, signal_size, &data_ptrs);
if (r < 0) {
- unifi_error(priv, "udi_send_signal_raw: send failed (%d)\n", r);
+ unifi_error(priv,
+ "udi_send_signal_raw: send failed (%d)\n", r);
func_exit();
return -EIO;
}
@@ -728,20 +739,22 @@ udi_send_signal_raw(unifi_priv_t *priv, unsigned char *buf, int buflen)
#ifdef CSR_NATIVE_LINUX
if (sig_id == CSR_MLME_POWERMGT_REQUEST_ID) {
int power_mode = CSR_GET_UINT16_FROM_LITTLE_ENDIAN((buf +
- SIZEOF_SIGNAL_HEADER + (UNIFI_MAX_DATA_REFERENCES*SIZEOF_DATAREF)));
+ SIZEOF_SIGNAL_HEADER +
+ (UNIFI_MAX_DATA_REFERENCES*SIZEOF_DATAREF)));
#ifdef CSR_SUPPORT_WEXT
/* Overide the wext power mode to the new value */
priv->wext_conf.power_mode = power_mode;
#endif
/* Configure deep sleep signaling */
- if (power_mode || (priv->interfacePriv[0]->connected == UnifiNotConnected)) {
+ if (power_mode || (priv->interfacePriv[0]->connected ==
+ UnifiNotConnected)) {
csrResult = unifi_configure_low_power_mode(priv->card,
- UNIFI_LOW_POWER_ENABLED,
- UNIFI_PERIODIC_WAKE_HOST_DISABLED);
+ UNIFI_LOW_POWER_ENABLED,
+ UNIFI_PERIODIC_WAKE_HOST_DISABLED);
} else {
csrResult = unifi_configure_low_power_mode(priv->card,
- UNIFI_LOW_POWER_DISABLED,
- UNIFI_PERIODIC_WAKE_HOST_DISABLED);
+ UNIFI_LOW_POWER_DISABLED,
+ UNIFI_PERIODIC_WAKE_HOST_DISABLED);
}
}
#endif
@@ -771,9 +784,8 @@ udi_send_signal_raw(unifi_priv_t *priv, unsigned char *buf, int buflen)
* number of bytes written or an error code on failure
* ---------------------------------------------------------------------------
*/
-static ssize_t
-unifi_write(struct file *filp, const char *p, size_t len, loff_t *poff)
-{
+static ssize_t unifi_write(struct file *filp, const char *p, size_t len,
+ loff_t *poff) {
ul_client_t *pcli = (ul_client_t*)filp->private_data;
unifi_priv_t *priv;
unsigned char *buf;
@@ -811,7 +823,8 @@ unifi_write(struct file *filp, const char *p, size_t len, loff_t *poff)
csrResult = unifi_net_data_malloc(priv, &bulkdata.d[0], len);
if (csrResult != CSR_RESULT_SUCCESS) {
- unifi_error(priv, "unifi_write: failed to allocate request_data.\n");
+ unifi_error(priv,
+ "unifi_write: failed to allocate request_data.\n");
func_exit();
return -ENOMEM;
}
@@ -820,7 +833,8 @@ unifi_write(struct file *filp, const char *p, size_t len, loff_t *poff)
/* Get the data from the AMP client. */
if (copy_from_user((void*)user_data_buf, p, len)) {
- unifi_error(priv, "unifi_write: copy from user failed\n");
+ unifi_error(priv,
+ "unifi_write: copy from user failed\n");
unifi_net_data_free(priv, &bulkdata.d[0]);
func_exit();
return -EFAULT;
@@ -832,18 +846,22 @@ unifi_write(struct file *filp, const char *p, size_t len, loff_t *poff)
/* Number of bytes in the signal */
sig_id = GET_SIGNAL_ID(bulkdata.d[0].os_data_ptr);
signal_size = len;
- signal_size -= GET_PACKED_DATAREF_LEN(bulkdata.d[0].os_data_ptr, 0);
- signal_size -= GET_PACKED_DATAREF_LEN(bulkdata.d[0].os_data_ptr, 1);
+ signal_size -=
+ GET_PACKED_DATAREF_LEN(bulkdata.d[0].os_data_ptr, 0);
+ signal_size -=
+ GET_PACKED_DATAREF_LEN(bulkdata.d[0].os_data_ptr, 1);
if ((signal_size <= 0) || (signal_size > len)) {
- unifi_error(priv, "unifi_write - Couldn't find length of signal 0x%x\n",
- sig_id);
+ unifi_error(priv,
+ "unifi_write - Couldn't find length of signal 0x%x\n",
+ sig_id);
unifi_net_data_free(priv, &bulkdata.d[0]);
func_exit();
return -EINVAL;
}
- unifi_trace(priv, UDBG2, "unifi_write: signal 0x%.4X len:%d\n",
- sig_id, signal_size);
+ unifi_trace(priv, UDBG2,
+ "unifi_write: signal 0x%.4X len:%d\n",
+ sig_id, signal_size);
/* Allocate a buffer for the signal */
signal_buf = kmalloc(signal_size, GFP_KERNEL);
@@ -866,10 +884,13 @@ unifi_write(struct file *filp, const char *p, size_t len, loff_t *poff)
bulkdata.d[0].os_data_ptr = NULL;
}
- /* Send the signal calling the function that uses the wire-formatted signals. */
- r = ul_send_signal_raw(priv, signal_buf, signal_size, &bulkdata);
+ /* Send the signal calling the function that uses
+ * the wire-formatted signals. */
+ r = ul_send_signal_raw(priv, signal_buf, signal_size,
+ &bulkdata);
if (r < 0) {
- unifi_error(priv, "unifi_write: send failed (%d)\n", r);
+ unifi_error(priv,
+ "unifi_write: send failed (%d)\n", r);
if (bulkdata.d[0].os_data_ptr != NULL) {
unifi_net_data_free(priv, &bulkdata.d[0]);
}
@@ -894,9 +915,10 @@ unifi_write(struct file *filp, const char *p, size_t len, loff_t *poff)
/*
* In SME userspace build read() contains a SYS or MGT message.
- * Note that even though the SME sends one signal at a time, we can not
- * use unifi_net_data_malloc because in the early stages, before having
- * initialised the core, it will fail since the I/O block size is unknown.
+ * Note that even though the SME sends one signal at a time,
+ * we can not use unifi_net_data_malloc because in the early
+ * stages, before having initialised the core, it will fail
+ * since the I/O block size is unknown.
*/
#ifdef CSR_SME_USERSPACE
if (pcli->configuration & CLI_SME_USERSPACE) {
@@ -906,10 +928,12 @@ unifi_write(struct file *filp, const char *p, size_t len, loff_t *poff)
}
#endif
- /* ul_send_signal_raw will do a sanity check of len against signal content */
+ /* ul_send_signal_raw will do a sanity check of len against
+ * signal content */
/*
- * udi_send_signal_raw() and udi_send_signal_unpacked() return the number of bytes consumed.
+ * udi_send_signal_raw() and udi_send_signal_unpacked() return
+ * the number of bytes consumed.
* A write call can pass multiple signal concatenated together.
*/
bytes_written = 0;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/