[PATCH] staging: Add SystemBase Multi-2/PCI driver

[Steven Rostedt]

I ported the driver supplied by SystemBase to mainline.

As the driver had MODULE_LICENSE("GPL") it is declared as a GPL module
and thus I have the right to distribute it upstream. Note, I did the
bare minimum to get it working. It still needs a lot of loving.

Cc: hjchoi <hjchoi@xxxxxxxxxx>
Signed-off-by: Steven Rostedt <rostedt@xxxxxxxxxxx>
---
 drivers/staging/Kconfig                 |    2 +
 drivers/staging/Makefile                |    1 +
 drivers/staging/sb105x/Kconfig          |    9 +
 drivers/staging/sb105x/Makefile         |    3 +
 drivers/staging/sb105x/sb_mp_register.h |  295 +++
 drivers/staging/sb105x/sb_pci_mp.c      | 3195 +++++++++++++++++++++++++++++++
 drivers/staging/sb105x/sb_pci_mp.h      |  293 +++
 drivers/staging/sb105x/sb_ser_core.h    |  368 ++++
 8 files changed, 4166 insertions(+)
 create mode 100644 drivers/staging/sb105x/Kconfig
 create mode 100644 drivers/staging/sb105x/Makefile
 create mode 100644 drivers/staging/sb105x/sb_mp_register.h
 create mode 100644 drivers/staging/sb105x/sb_pci_mp.c
 create mode 100644 drivers/staging/sb105x/sb_pci_mp.h
 create mode 100644 drivers/staging/sb105x/sb_ser_core.h

diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 12a6f2e..9ab6b9f 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -142,4 +142,6 @@ source "drivers/staging/dgrp/Kconfig"
 
 source "drivers/staging/fwserial/Kconfig"
 
+source "drivers/staging/sb105x/Kconfig"
+
 endif # STAGING
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 6d16f82..3d1bec2 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -63,3 +63,4 @@ obj-$(CONFIG_CED1401)		+= ced1401/
 obj-$(CONFIG_DRM_IMX)		+= imx-drm/
 obj-$(CONFIG_DGRP)		+= dgrp/
 obj-$(CONFIG_FIREWIRE_SERIAL)	+= fwserial/
+obj-$(CONFIG_SB105X)		+= sb105x/
diff --git a/drivers/staging/sb105x/Kconfig b/drivers/staging/sb105x/Kconfig
new file mode 100644
index 0000000..ac87c5e
--- /dev/null
+++ b/drivers/staging/sb105x/Kconfig
@@ -0,0 +1,9 @@
+config SB105X
+	tristate "SystemBase PCI Multiport UART"
+	select SERIAL_CORE
+	depends on PCI
+	help
+	  A driver for the SystemBase Multi-2/PCI serial card
+
+	  To compile this driver a module, choose M here: the module
+	  will be called "sb105x".
diff --git a/drivers/staging/sb105x/Makefile b/drivers/staging/sb105x/Makefile
new file mode 100644
index 0000000..b1bf377
--- /dev/null
+++ b/drivers/staging/sb105x/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_SB105X) +=	sb105x.o
+
+sb105x-y :=  sb_pci_mp.o
diff --git a/drivers/staging/sb105x/sb_mp_register.h b/drivers/staging/sb105x/sb_mp_register.h
new file mode 100644
index 0000000..5480ae1
--- /dev/null
+++ b/drivers/staging/sb105x/sb_mp_register.h
@@ -0,0 +1,295 @@
+
+/*
+ * SB105X_UART.h
+ *
+ * Copyright (C) 2008 systembase
+ *
+ * UART registers.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef UART_SB105X_H
+#define UART_SB105X_H
+
+/* 
+ * option register 
+ */
+
+/* Device Infomation Register */
+#define MP_OPTR_DIR0		0x04 	/* port0 ~ port8 */
+#define MP_OPTR_DIR1		0x05 	/* port8 ~ port15 */
+#define MP_OPTR_DIR2		0x06 	/* port16 ~ port23 */
+#define MP_OPTR_DIR3		0x07 	/* port24 ~ port31 */
+
+#define DIR_UART_16C550 	0
+#define DIR_UART_16C1050	1
+#define DIR_UART_16C1050A	2
+
+#define	DIR_CLK_1843200		0x0		/* input clock 1843200 Hz */
+#define	DIR_CLK_3686400		0x1		/* input clock 3686400 Hz */
+#define	DIR_CLK_7372800		0x2		/* input clock 7372800 Hz */
+#define	DIR_CLK_14745600	0x3		/* input clock 14745600 Hz */
+#define	DIR_CLK_29491200	0x4		/* input clock 29491200 Hz */
+#define	DIR_CLK_58985400	0x5		/* input clock 58985400 Hz */
+
+/* Interface Information Register */
+#define MP_OPTR_IIR0		0x08 	/* port0 ~ port8 */
+#define MP_OPTR_IIR1		0x09 	/* port8 ~ port15 */
+#define MP_OPTR_IIR2		0x0A 	/* port16 ~ port23 */
+#define MP_OPTR_IIR3		0x0B 	/* port24 ~ port31 */
+
+#define IIR_RS232		0x00		/* RS232 type */
+#define IIR_RS422		0x10		/* RS422 type */
+#define IIR_RS485		0x20		/* RS485 type */
+#define IIR_UNKNOWN		0x30		/* unknown type */
+
+/* Interrrupt Mask Register */
+#define MP_OPTR_IMR0		0x0C 	/* port0 ~ port8 */
+#define MP_OPTR_IMR1		0x0D 	/* port8 ~ port15 */
+#define MP_OPTR_IMR2		0x0E 	/* port16 ~ port23 */
+#define MP_OPTR_IMR3		0x0F 	/* port24 ~ port31 */
+
+/* Interrupt Poll Register */
+#define MP_OPTR_IPR0		0x10 	/* port0 ~ port8 */
+#define MP_OPTR_IPR1		0x11 	/* port8 ~ port15 */
+#define MP_OPTR_IPR2		0x12 	/* port16 ~ port23 */
+#define MP_OPTR_IPR3		0x13 	/* port24 ~ port31 */
+
+/* General Purpose Output Control Register */
+#define MP_OPTR_GPOCR		0x20
+
+/* General Purpose Output Data Register */
+#define MP_OPTR_GPODR		0x21
+
+/* Parallel Additional Function Register */
+#define MP_OPTR_PAFR		0x23
+
+/*
+ * systembase 16c105x UART register
+ */
+
+#define PAGE_0 0
+#define PAGE_1 1
+#define PAGE_2 2
+#define PAGE_3 3
+#define PAGE_4 4
+
+/*
+ *  ******************************************************************
+ *  * DLAB=0                  ===============       Page 0 Registers *
+ *  ******************************************************************
+ */
+
+#define SB105X_RX		0	/* In:  Receive buffer */
+#define SB105X_TX		0	/* Out: Transmit buffer */
+
+#define SB105X_IER		1	/* Out: Interrupt Enable Register */
+
+#define SB105X_IER_CTSI	  	0x80	/* CTS# Interrupt Enable (Requires EFR[4] = 1) */
+#define SB105X_IER_RTSI	  	0x40	/* RTS# Interrupt Enable (Requires EFR[4] = 1) */
+#define SB105X_IER_XOI	  	0x20	/* Xoff Interrupt Enable (Requires EFR[4] = 1) */
+#define SB105X_IER_SME	  	0x10	/* Sleep Mode Enable (Requires EFR[4] = 1) */
+#define SB105X_IER_MSI	  	0x08	/* Enable Modem status interrupt */
+#define SB105X_IER_RLSI	  	0x04	/* Enable receiver line status interrupt */
+#define SB105X_IER_THRI	  	0x02	/* Enable Transmitter holding register int. */
+#define SB105X_IER_RDI	  	0x01	/* Enable receiver data interrupt */
+
+#define SB105X_ISR		2	/* In:  Interrupt ID Register */
+
+#define SB105X_ISR_NOINT	0x01	/* No interrupts pending */
+#define SB105X_ISR_RLSI	  	0x06	/* Receiver line status interrupt (Priority = 1)*/
+#define SB105X_ISR_RDAI	  	0x0c	/* Receive Data Available interrupt */
+#define SB105X_ISR_CTII	  	0x04	/* Character Timeout Indication interrupt */
+#define SB105X_ISR_THRI	  	0x02	/* Transmitter holding register empty */
+#define SB105X_ISR_MSI	  	0x00	/* Modem status interrupt */
+#define SB105X_ISR_RXCI	  	0x10	/* Receive Xoff or Special Character interrupt */
+#define SB105X_ISR_RCSI	  	0x20	/* RTS#, CTS# status interrupt during Auto RTS/CTS flow control */
+
+#define SB105X_FCR		2	/* Out: FIFO Control Register */
+
+#define SB105X_FCR_FEN    	0x01	/* FIFO Enable */
+#define SB105X_FCR_RXFR	  	0x02	/* RX FIFO Reset */
+#define SB105X_FCR_TXFR	  	0x04	/* TX FIFO Reset */
+#define SB105X_FCR_DMS	  	0x08	/* DMA Mode Select */
+
+#define SB105X_FCR_RTR08  	0x00	/* Receice Trigger Level set at 8 */
+#define SB105X_FCR_RTR16  	0x40  /* Receice Trigger Level set at 16 */
+#define SB105X_FCR_RTR56  	0x80  /* Receice Trigger Level set at 56 */
+#define SB105X_FCR_RTR60  	0xc0  /* Receice Trigger Level set at 60 */
+#define SB105X_FCR_TTR08  	0x00  /* Transmit Trigger Level set at 8 */
+#define SB105X_FCR_TTR16	0x10  /* Transmit Trigger Level set at 16 */
+#define SB105X_FCR_TTR32	0x20  /* Transmit Trigger Level set at 32 */
+#define SB105X_FCR_TTR56	0x30  /* Transmit Trigger Level set at 56 */
+
+#define SB105X_LCR		3	/* Out: Line Control Register */
+/*
+ *  * Note: if the word length is 5 bits (SB105X_LCR_WLEN5), then setting 
+ *  * SB105X_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
+ */
+#define SB105X_LCR_DLAB   	0x80  /* Divisor Latch Enable */
+#define SB105X_LCR_SBC    	0x40  /* Break Enable*/
+#define SB105X_LCR_SPAR   	0x20  /* Set Stick parity */
+#define SB105X_LCR_EPAR   	0x10  /* Even parity select */
+#define SB105X_LCR_PAREN  	0x08  /* Parity Enable */
+#define SB105X_LCR_STOP   	0x04  /* Stop bits: 0->1 bit, 1->2 bits, 1 and SB105X_LCR_WLEN5 -> 1.5 bit */
+#define SB105X_LCR_WLEN5  	0x00  /* Wordlength: 5 bits */
+#define SB105X_LCR_WLEN6  	0x01  /* Wordlength: 6 bits */
+#define SB105X_LCR_WLEN7  	0x02  /* Wordlength: 7 bits */
+#define SB105X_LCR_WLEN8  	0x03  /* Wordlength: 8 bits */
+
+#define SB105X_LCR_BF		0xBF
+
+#define SB105X_MCR		4	/* Out: Modem Control Register */
+#define SB105X_MCR_CPS    	0x80  /* Clock Prescaler Select */
+#define SB105X_MCR_P2S    	0x40  /* Page 2 Select /Xoff Re-Transmit Access Enable */
+#define SB105X_MCR_XOA    	0x20  /* Xon Any Enable */
+#define SB105X_MCR_ILB		0x10  /* Internal Loopback Enable */
+#define SB105X_MCR_OUT2		0x08  /* Out2/Interrupt Output Enable*/
+#define SB105X_MCR_OUT1		0x04  /* Out1/Interrupt Output Enable */
+#define SB105X_MCR_RTS    	0x02  /* RTS# Output */
+#define SB105X_MCR_DTR    	0x01  /* DTR# Output */
+
+#define SB105X_LSR		5	/* In:  Line Status Register */
+#define SB105X_LSR_RFEI   	0x80  /* Receive FIFO data error Indicator */
+#define SB105X_LSR_TEMI   	0x40  /* THR and TSR Empty Indicator */
+#define SB105X_LSR_THRE		0x20  /* THR Empty Indicator */
+#define SB105X_LSR_BII		0x10  /* Break interrupt indicator */
+#define SB105X_LSR_FEI		0x08  /* Frame error indicator */
+#define SB105X_LSR_PEI		0x04  /* Parity error indicator */
+#define SB105X_LSR_OEI		0x02  /* Overrun error indicator */
+#define SB105X_LSR_RDRI		0x01  /* Receive data ready Indicator*/
+
+#define SB105X_MSR		6	/* In:  Modem Status Register */
+#define SB105X_MSR_DCD		0x80  /* Data Carrier Detect */
+#define SB105X_MSR_RI		0x40  /* Ring Indicator */
+#define SB105X_MSR_DSR		0x20  /* Data Set Ready */
+#define SB105X_MSR_CTS		0x10  /* Clear to Send */
+#define SB105X_MSR_DDCD		0x08  /* Delta DCD */
+#define SB105X_MSR_DRI		0x04  /* Delta ring indicator */
+#define SB105X_MSR_DDSR		0x02  /* Delta DSR */
+#define SB105X_MSR_DCTS		0x01  /* Delta CTS */
+
+#define SB105XA_MDR		6	/* Out: Multi Drop mode Register */
+#define SB105XA_MDR_NPS		0x08  /* 9th Bit Polarity Select */
+#define SB105XA_MDR_AME		0x02  /* Auto Multi-drop Enable */
+#define SB105XA_MDR_MDE		0x01  /* Multi Drop Enable */
+
+#define SB105X_SPR		7	/* I/O: Scratch Register */
+
+/*
+ * DLAB=1
+ */
+#define SB105X_DLL		0	/* Out: Divisor Latch Low */
+#define SB105X_DLM		1	/* Out: Divisor Latch High */
+
+/*
+ *  ******************************************************************
+ *  * DLAB(LCR[7]) = 0 , MCR[6] = 1  =============  Page 2 Registers *
+ *  ******************************************************************
+ */
+#define SB105X_GICR		1	/* Global Interrupt Control Register */
+#define SB105X_GICR_GIM   	0x01  /* Global Interrupt Mask */
+
+#define SB105X_GISR		2	/* Global Interrupt Status Register */
+#define SB105X_GISR_MGICR0  	0x80  /* Mirror the content of GICR[0] */
+#define SB105X_GISR_CS3IS   	0x08  /* SB105X of CS3# Interrupt Status */
+#define SB105X_GISR_CS2IS   	0x04  /* SB105X of CS2# Interrupt Status */
+#define SB105X_GISR_CS1IS   	0x02  /* SB105X of CS1# Interrupt Status */
+#define SB105X_GISR_CS0IS   	0x01  /* SB105X of CS0# Interrupt Status */
+
+#define SB105X_TFCR		5	/* Transmit FIFO Count Register */
+
+#define SB105X_RFCR		6	/* Receive FIFO Count Register */
+
+#define	SB105X_FSR		7	/* Flow Control Status Register */
+#define SB105X_FSR_THFS     	0x20  /* Transmit Hardware Flow Control Status */
+#define SB105X_FSR_TSFS     	0x10  /* Transmit Software Flow Control Status */
+#define SB105X_FSR_RHFS     	0x02  /* Receive Hardware Flow Control Status */
+#define SB105X_FSR_RSFS     	0x01  /* Receive Software Flow Control Status */
+
+/*
+ *  ******************************************************************
+ *  * LCR = 0xBF, PSR[0] = 0       =============    Page 3 Registers *
+ *  ******************************************************************
+ */
+
+#define SB105X_PSR		0	/* Page Select Register */
+#define SB105X_PSR_P3KEY    	0xA4 /* Page 3 Select Key */
+#define SB105X_PSR_P4KEY    	0xA5 /* Page 5 Select Key */
+
+#define SB105X_ATR		1	/* Auto Toggle Control Register */
+#define SB105X_ATR_RPS      	0x80  /* RXEN Polarity Select */
+#define SB105X_ATR_RCMS     	0x40  /* RXEN Control Mode Select */
+#define SB105X_ATR_TPS      	0x20  /* TXEN Polarity Select */
+#define SB105X_ATR_TCMS     	0x10  /* TXEN Control Mode Select */
+#define SB105X_ATR_ATDIS    	0x00  /* Auto Toggle is disabled */
+#define SB105X_ATR_ART      	0x01  /* RTS#/TXEN pin operates as TXEN */
+#define SB105X_ATR_ADT      	0x02  /* DTR#/TXEN pin operates as TXEN */
+#define SB105X_ATR_A80      	0x03  /* only in 80 pin use */
+
+#define SB105X_EFR		2	/* (Auto) Enhanced Feature Register */
+#define SB105X_EFR_ACTS     	0x80  /* Auto-CTS Flow Control Enable */
+#define SB105X_EFR_ARTS     	0x40  /* Auto-RTS Flow Control Enable */
+#define SB105X_EFR_SCD      	0x20  /* Special Character Detect */
+#define SB105X_EFR_EFBEN    	0x10  /* Enhanced Function Bits Enable */
+
+#define SB105X_XON1		4	/* Xon1 Character Register */
+#define SB105X_XON2		5	/* Xon2 Character Register */
+#define SB105X_XOFF1		6	/* Xoff1 Character Register */
+#define SB105X_XOFF2		7	/* Xoff2 Character Register */
+
+/*
+ *  ******************************************************************
+ *  * LCR = 0xBF, PSR[0] = 1       ============     Page 4 Registers *
+ *  ******************************************************************
+ */
+
+#define SB105X_AFR		1	/* Additional Feature Register */
+#define SB105X_AFR_GIPS     	0x20  /* Global Interrupt Polarity Select */
+#define SB105X_AFR_GIEN     	0x10  /* Global Interrupt Enable */
+#define SB105X_AFR_AFEN     	0x01  /* 256-byte FIFO Enable */
+
+#define SB105X_XRCR		2	/* Xoff Re-transmit Count Register */
+#define SB105X_XRCR_NRC1    	0x00  /* Transmits Xoff Character whenever the number of received data is 1 during XOFF status */
+#define SB105X_XRCR_NRC4    	0x01  /* Transmits Xoff Character whenever the number of received data is 4 during XOFF status */
+#define SB105X_XRCR_NRC8    	0x02  /* Transmits Xoff Character whenever the number of received data is 8 during XOFF status */
+#define SB105X_XRCR_NRC16   	0x03  /* Transmits Xoff Character whenever the number of received data is 16 during XOFF status */
+
+#define SB105X_TTR		4	/* Transmit FIFO Trigger Level Register */
+#define SB105X_RTR		5	/* Receive FIFO Trigger Level Register */
+#define SB105X_FUR		6	/* Flow Control Upper Threshold Register */
+#define SB105X_FLR		7	/* Flow Control Lower Threshold Register */
+
+
+/* page 0 */
+
+#define SB105X_GET_CHAR(port)	inb((port)->iobase + SB105X_RX)
+#define SB105X_GET_IER(port)	inb((port)->iobase + SB105X_IER)
+#define SB105X_GET_ISR(port)	inb((port)->iobase + SB105X_ISR)
+#define SB105X_GET_LCR(port)	inb((port)->iobase + SB105X_LCR)
+#define SB105X_GET_MCR(port)	inb((port)->iobase + SB105X_MCR)
+#define SB105X_GET_LSR(port)	inb((port)->iobase + SB105X_LSR)
+#define SB105X_GET_MSR(port)	inb((port)->iobase + SB105X_MSR)
+#define SB105X_GET_SPR(port)	inb((port)->iobase + SB105X_SPR)
+
+#define SB105X_PUT_CHAR(port,v)	outb((v),(port)->iobase + SB105X_TX )
+#define SB105X_PUT_IER(port,v)	outb((v),(port)->iobase + SB105X_IER )
+#define SB105X_PUT_FCR(port,v)	outb((v),(port)->iobase + SB105X_FCR )
+#define SB105X_PUT_LCR(port,v)	outb((v),(port)->iobase + SB105X_LCR )
+#define SB105X_PUT_MCR(port,v)	outb((v),(port)->iobase + SB105X_MCR )
+#define SB105X_PUT_SPR(port,v)	outb((v),(port)->iobase + SB105X_SPR )
+
+
+/* page 1 */
+#define SB105X_GET_REG(port,reg)	inb((port)->iobase + (reg))
+#define SB105X_PUT_REG(port,reg,v)	outb((v),(port)->iobase + (reg))
+
+/* page 2 */
+
+#define SB105X_PUT_PSR(port,v)	outb((v),(port)->iobase + SB105X_PSR )
+
+#endif 
diff --git a/drivers/staging/sb105x/sb_pci_mp.c b/drivers/staging/sb105x/sb_pci_mp.c
new file mode 100644
index 0000000..fbebf88
--- /dev/null
+++ b/drivers/staging/sb105x/sb_pci_mp.c
@@ -0,0 +1,3195 @@
+#include "sb_pci_mp.h"
+#include <linux/module.h>
+#include <linux/parport.h>
+
+extern struct parport *parport_pc_probe_port(unsigned long base_lo,
+		unsigned long base_hi,
+		int irq, int dma,
+		struct device *dev,
+		int irqflags);
+
+static struct mp_device_t mp_devs[MAX_MP_DEV];
+static int mp_nrpcibrds = sizeof(mp_pciboards)/sizeof(mppcibrd_t);
+static int NR_BOARD=0;
+static int NR_PORTS=0;
+static struct mp_port multi_ports[MAX_MP_PORT];
+static struct irq_info irq_lists[NR_IRQS];
+
+static _INLINE_ unsigned int serial_in(struct mp_port *mtpt, int offset);
+static _INLINE_ void serial_out(struct mp_port *mtpt, int offset, int value);
+static _INLINE_ unsigned int read_option_register(struct mp_port *mtpt, int offset);
+static int sb1054_get_register(struct sb_uart_port * port, int page, int reg);
+static int sb1054_set_register(struct sb_uart_port * port, int page, int reg, int value);
+static void SendATCommand(struct mp_port * mtpt);
+static int set_deep_fifo(struct sb_uart_port * port, int status);
+static int get_deep_fifo(struct sb_uart_port * port);
+static int get_device_type(int arg);
+static int set_auto_rts(struct sb_uart_port *port, int status);
+static void mp_stop(struct tty_struct *tty);
+static void __mp_start(struct tty_struct *tty);
+static void mp_start(struct tty_struct *tty);
+static void mp_tasklet_action(unsigned long data);
+static inline void mp_update_mctrl(struct sb_uart_port *port, unsigned int set, unsigned int clear);
+static int mp_startup(struct sb_uart_state *state, int init_hw);
+static void mp_shutdown(struct sb_uart_state *state);
+static void mp_change_speed(struct sb_uart_state *state, struct MP_TERMIOS *old_termios);
+
+static inline int __mp_put_char(struct sb_uart_port *port, struct circ_buf *circ, unsigned char c);
+static int mp_put_char(struct tty_struct *tty, unsigned char ch);
+
+static void mp_put_chars(struct tty_struct *tty);
+static int mp_write(struct tty_struct *tty, const unsigned char * buf, int count);
+static int mp_write_room(struct tty_struct *tty);
+static int mp_chars_in_buffer(struct tty_struct *tty);
+static void mp_flush_buffer(struct tty_struct *tty);
+static void mp_send_xchar(struct tty_struct *tty, char ch);
+static void mp_throttle(struct tty_struct *tty);
+static void mp_unthrottle(struct tty_struct *tty);
+static int mp_get_info(struct sb_uart_state *state, struct serial_struct *retinfo);
+static int mp_set_info(struct sb_uart_state *state, struct serial_struct *newinfo);
+static int mp_get_lsr_info(struct sb_uart_state *state, unsigned int *value);
+
+static int mp_tiocmget(struct tty_struct *tty);
+static int mp_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear);
+static int mp_break_ctl(struct tty_struct *tty, int break_state);
+static int mp_do_autoconfig(struct sb_uart_state *state);
+static int mp_wait_modem_status(struct sb_uart_state *state, unsigned long arg);
+static int mp_get_count(struct sb_uart_state *state, struct serial_icounter_struct *icnt);
+static int mp_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg);
+static void mp_set_termios(struct tty_struct *tty, struct MP_TERMIOS *old_termios);
+static void mp_close(struct tty_struct *tty, struct file *filp);
+static void mp_wait_until_sent(struct tty_struct *tty, int timeout);
+static void mp_hangup(struct tty_struct *tty);
+static void mp_update_termios(struct sb_uart_state *state);
+static int mp_block_til_ready(struct file *filp, struct sb_uart_state *state);
+static struct sb_uart_state *uart_get(struct uart_driver *drv, int line);
+static int mp_open(struct tty_struct *tty, struct file *filp);
+static const char *mp_type(struct sb_uart_port *port);
+static void mp_change_pm(struct sb_uart_state *state, int pm_state);
+static inline void mp_report_port(struct uart_driver *drv, struct sb_uart_port *port);
+static void mp_configure_port(struct uart_driver *drv, struct sb_uart_state *state, struct sb_uart_port *port);
+static void mp_unconfigure_port(struct uart_driver *drv, struct sb_uart_state *state);
+static int mp_register_driver(struct uart_driver *drv);
+static void mp_unregister_driver(struct uart_driver *drv);
+static int mp_add_one_port(struct uart_driver *drv, struct sb_uart_port *port);
+static int mp_remove_one_port(struct uart_driver *drv, struct sb_uart_port *port);
+static void autoconfig(struct mp_port *mtpt, unsigned int probeflags);
+static void autoconfig_irq(struct mp_port *mtpt);
+static void multi_stop_tx(struct sb_uart_port *port);
+static void multi_start_tx(struct sb_uart_port *port);
+static void multi_stop_rx(struct sb_uart_port *port);
+static void multi_enable_ms(struct sb_uart_port *port);
+static _INLINE_ void receive_chars(struct mp_port *mtpt, int *status );
+static _INLINE_ void transmit_chars(struct mp_port *mtpt);
+static _INLINE_ void check_modem_status(struct mp_port *mtpt);
+static inline void multi_handle_port(struct mp_port *mtpt);
+static irqreturn_t multi_interrupt(int irq, void *dev_id);
+static void serial_do_unlink(struct irq_info *i, struct mp_port *mtpt);
+static int serial_link_irq_chain(struct mp_port *mtpt);
+static void serial_unlink_irq_chain(struct mp_port *mtpt);
+static void multi_timeout(unsigned long data);
+static unsigned int multi_tx_empty(struct sb_uart_port *port);
+static unsigned int multi_get_mctrl(struct sb_uart_port *port);
+static void multi_set_mctrl(struct sb_uart_port *port, unsigned int mctrl);
+static void multi_break_ctl(struct sb_uart_port *port, int break_state);
+static int multi_startup(struct sb_uart_port *port);
+static void multi_shutdown(struct sb_uart_port *port);
+static unsigned int multi_get_divisor(struct sb_uart_port *port, unsigned int baud);
+static void multi_set_termios(struct sb_uart_port *port, struct MP_TERMIOS *termios, struct MP_TERMIOS *old);
+static void multi_pm(struct sb_uart_port *port, unsigned int state, unsigned int oldstate);
+static void multi_release_std_resource(struct mp_port *mtpt);
+static void multi_release_port(struct sb_uart_port *port);
+static int multi_request_port(struct sb_uart_port *port);
+static void multi_config_port(struct sb_uart_port *port, int flags);
+static int multi_verify_port(struct sb_uart_port *port, struct serial_struct *ser);
+static const char * multi_type(struct sb_uart_port *port);
+static void __init multi_init_ports(void);
+static void __init multi_register_ports(struct uart_driver *drv);
+static int init_mp_dev(struct pci_dev *pcidev, mppcibrd_t brd);
+
+static int deep[256];
+static int deep_count;
+static int fcr_arr[256];
+static int fcr_count;
+static int ttr[256];
+static int ttr_count;
+static int rtr[256];
+static int rtr_count;
+
+module_param_array(deep,int,&deep_count,0);
+module_param_array(fcr_arr,int,&fcr_count,0);
+module_param_array(ttr,int,&ttr_count,0);
+module_param_array(rtr,int,&rtr_count,0);
+
+static _INLINE_ unsigned int serial_in(struct mp_port *mtpt, int offset)
+{
+	return inb(mtpt->port.iobase + offset);
+}
+
+static _INLINE_ void serial_out(struct mp_port *mtpt, int offset, int value)
+{
+	outb(value, mtpt->port.iobase + offset);
+}
+
+static _INLINE_ unsigned int read_option_register(struct mp_port *mtpt, int offset)
+{
+	return inb(mtpt->option_base_addr + offset);
+}
+
+static int sb1053a_get_interface(struct mp_port *mtpt, int port_num)
+{
+	unsigned long option_base_addr = mtpt->option_base_addr;
+	unsigned int  interface = 0;
+
+	switch (port_num)
+	{
+		case 0:
+		case 1:
+			/* set GPO[1:0] = 00 */
+			outb(0x00, option_base_addr + MP_OPTR_GPODR);
+			break;
+		case 2:
+		case 3:
+			/* set GPO[1:0] = 01 */
+			outb(0x01, option_base_addr + MP_OPTR_GPODR);
+			break;
+		case 4:
+		case 5:
+			/* set GPO[1:0] = 10 */
+			outb(0x02, option_base_addr + MP_OPTR_GPODR);
+			break;
+		default:
+			break;
+	}
+
+	port_num &= 0x1;
+
+	/* get interface */
+	interface = inb(option_base_addr + MP_OPTR_IIR0 + port_num);
+
+	/* set GPO[1:0] = 11 */
+	outb(0x03, option_base_addr + MP_OPTR_GPODR);
+
+	return (interface);
+}
+		
+static int sb1054_get_register(struct sb_uart_port * port, int page, int reg)
+{
+	int ret = 0;
+	unsigned int lcr = 0;
+	unsigned int mcr = 0;
+	unsigned int tmp = 0;
+
+	if( page <= 0)
+	{
+		printk(" page 0 can not use this fuction\n");
+		return -1;
+	}
+
+	switch(page)
+	{
+		case 1:
+			lcr = SB105X_GET_LCR(port);
+			tmp = lcr | SB105X_LCR_DLAB;
+			SB105X_PUT_LCR(port, tmp);
+
+			tmp = SB105X_GET_LCR(port);
+
+			ret = SB105X_GET_REG(port,reg);
+			SB105X_PUT_LCR(port,lcr);
+			break;
+		case 2:
+			mcr = SB105X_GET_MCR(port);
+			tmp = mcr | SB105X_MCR_P2S;
+			SB105X_PUT_MCR(port,tmp);
+
+			ret = SB105X_GET_REG(port,reg);
+
+			SB105X_PUT_MCR(port,mcr);
+			break;
+		case 3:
+			lcr = SB105X_GET_LCR(port);
+			tmp = lcr | SB105X_LCR_BF;
+			SB105X_PUT_LCR(port,tmp);
+			SB105X_PUT_REG(port,SB105X_PSR,SB105X_PSR_P3KEY);
+
+			ret = SB105X_GET_REG(port,reg);
+
+			SB105X_PUT_LCR(port,lcr);
+			break;
+		case 4:
+			lcr = SB105X_GET_LCR(port);
+			tmp = lcr | SB105X_LCR_BF;
+			SB105X_PUT_LCR(port,tmp);
+			SB105X_PUT_REG(port,SB105X_PSR,SB105X_PSR_P4KEY);
+
+			ret = SB105X_GET_REG(port,reg);
+
+			SB105X_PUT_LCR(port,lcr);
+			break;
+		default:
+			printk(" error invalid page number \n");
+			return -1;
+	}
+
+	return ret;
+}
+
+static int sb1054_set_register(struct sb_uart_port * port, int page, int reg, int value)
+{  
+	int lcr = 0;
+	int mcr = 0;
+	int ret = 0;
+
+	if( page <= 0)
+	{
+		printk(" page 0 can not use this fuction\n");
+		return -1;
+	}
+	switch(page)
+	{
+		case 1:
+			lcr = SB105X_GET_LCR(port);
+			SB105X_PUT_LCR(port, lcr | SB105X_LCR_DLAB);
+
+			SB105X_PUT_REG(port,reg,value);
+
+			SB105X_PUT_LCR(port, lcr);
+			ret = 1;
+			break;
+		case 2:
+			mcr = SB105X_GET_MCR(port);
+			SB105X_PUT_MCR(port, mcr | SB105X_MCR_P2S);
+
+			SB105X_PUT_REG(port,reg,value);
+
+			SB105X_PUT_MCR(port, mcr);
+			ret = 1;
+			break;
+		case 3:
+			lcr = SB105X_GET_LCR(port);
+			SB105X_PUT_LCR(port, lcr | SB105X_LCR_BF);
+			SB105X_PUT_PSR(port, SB105X_PSR_P3KEY);
+
+			SB105X_PUT_REG(port,reg,value);
+
+			SB105X_PUT_LCR(port, lcr);
+			ret = 1;
+			break;
+		case 4:
+			lcr = SB105X_GET_LCR(port);
+			SB105X_PUT_LCR(port, lcr | SB105X_LCR_BF);
+			SB105X_PUT_PSR(port, SB105X_PSR_P4KEY);
+
+			SB105X_PUT_REG(port,reg,value);
+
+			SB105X_PUT_LCR(port, lcr);
+			ret = 1;
+			break;
+		default:
+			printk(" error invalid page number \n");
+			return -1;
+	}
+
+	return ret;
+}
+
+static int set_multidrop_mode(struct sb_uart_port *port, unsigned int mode)
+{
+	int mdr = SB105XA_MDR_NPS;
+
+	if (mode & MDMODE_ENABLE)
+	{
+		mdr |= SB105XA_MDR_MDE;
+	}
+
+	if (1) //(mode & MDMODE_AUTO)
+	{
+		int efr = 0;
+		mdr |= SB105XA_MDR_AME;
+		efr = sb1054_get_register(port, PAGE_3, SB105X_EFR);
+		efr |= SB105X_EFR_SCD;
+		sb1054_set_register(port, PAGE_3, SB105X_EFR, efr);
+	}
+
+	sb1054_set_register(port, PAGE_1, SB105XA_MDR, mdr);
+	port->mdmode &= ~0x6;
+	port->mdmode |= mode;
+	printk("[%d] multidrop init: %x\n", port->line, port->mdmode);
+
+	return 0;
+}
+
+static int get_multidrop_addr(struct sb_uart_port *port)
+{
+	return sb1054_get_register(port, PAGE_3, SB105X_XOFF2);
+}
+
+static int set_multidrop_addr(struct sb_uart_port *port, unsigned int addr)
+{
+	sb1054_set_register(port, PAGE_3, SB105X_XOFF2, addr);
+
+	return 0;
+}
+
+static void SendATCommand(struct mp_port * mtpt)
+{
+	//		      a    t	cr   lf
+	unsigned char ch[] = {0x61,0x74,0x0d,0x0a,0x0};
+	unsigned char lineControl;
+	unsigned char i=0;
+	unsigned char Divisor = 0xc;
+
+	lineControl = serial_inp(mtpt,UART_LCR);
+	serial_outp(mtpt,UART_LCR,(lineControl | UART_LCR_DLAB));
+	serial_outp(mtpt,UART_DLL,(Divisor & 0xff));
+	serial_outp(mtpt,UART_DLM,(Divisor & 0xff00)>>8); //baudrate is 4800
+
+
+	serial_outp(mtpt,UART_LCR,lineControl);	
+	serial_outp(mtpt,UART_LCR,0x03); // N-8-1
+	serial_outp(mtpt,UART_FCR,7); 
+	serial_outp(mtpt,UART_MCR,0x3);
+	while(ch[i]){
+		while((serial_inp(mtpt,UART_LSR) & 0x60) !=0x60){
+			;
+		}
+		serial_outp(mtpt,0,ch[i++]);
+	}
+
+
+}// end of SendATCommand()
+
+static int set_deep_fifo(struct sb_uart_port * port, int status)
+{
+	int afr_status = 0;
+	afr_status = sb1054_get_register(port, PAGE_4, SB105X_AFR);
+
+	if(status == ENABLE)
+	{
+		afr_status |= SB105X_AFR_AFEN;
+	}
+	else
+	{
+		afr_status &= ~SB105X_AFR_AFEN;
+	}
+		
+	sb1054_set_register(port,PAGE_4,SB105X_AFR,afr_status);
+	sb1054_set_register(port,PAGE_4,SB105X_TTR,ttr[port->line]); 
+	sb1054_set_register(port,PAGE_4,SB105X_RTR,rtr[port->line]); 
+	afr_status = sb1054_get_register(port, PAGE_4, SB105X_AFR);
+		
+	return afr_status;
+}
+
+static int get_device_type(int arg)
+{
+	int ret;
+        ret = inb(mp_devs[arg].option_reg_addr+MP_OPTR_DIR0);
+        ret = (ret & 0xf0) >> 4;
+        switch (ret)
+        {
+               case DIR_UART_16C550:
+                    return PORT_16C55X;
+               case DIR_UART_16C1050:
+                    return PORT_16C105X;
+               case DIR_UART_16C1050A:
+               /*
+               if (mtpt->port.line < 2)
+               {
+                    return PORT_16C105XA;
+               }
+               else
+               {
+                   if (mtpt->device->device_id & 0x50)
+                   {
+                       return PORT_16C55X;
+                   }
+                   else
+                   {
+                       return PORT_16C105X;
+                   }
+               }*/
+               return PORT_16C105XA;
+               default:
+                    return PORT_UNKNOWN;
+        }
+
+}
+static int get_deep_fifo(struct sb_uart_port * port)
+{
+	int afr_status = 0;
+	afr_status = sb1054_get_register(port, PAGE_4, SB105X_AFR);
+	return afr_status;
+}
+
+static int set_auto_rts(struct sb_uart_port *port, int status)
+{
+	int atr_status = 0;
+
+#if 0
+	int efr_status = 0;
+
+	efr_status = sb1054_get_register(port, PAGE_3, SB105X_EFR);
+	if(status == ENABLE)
+		efr_status |= SB105X_EFR_ARTS;
+	else
+		efr_status &= ~SB105X_EFR_ARTS;
+	sb1054_set_register(port,PAGE_3,SB105X_EFR,efr_status);
+	efr_status = sb1054_get_register(port, PAGE_3, SB105X_EFR);
+#endif
+		
+//ATR
+	atr_status = sb1054_get_register(port, PAGE_3, SB105X_ATR);
+	switch(status)
+	{
+		case RS422PTP:
+			atr_status = (SB105X_ATR_TPS) | (SB105X_ATR_A80);
+			break;
+		case RS422MD:
+			atr_status = (SB105X_ATR_TPS) | (SB105X_ATR_TCMS) | (SB105X_ATR_A80);
+			break;
+		case RS485NE:
+			atr_status = (SB105X_ATR_RCMS) | (SB105X_ATR_TPS) | (SB105X_ATR_TCMS) | (SB105X_ATR_A80);
+			break;
+		case RS485ECHO:
+			atr_status = (SB105X_ATR_TPS) | (SB105X_ATR_TCMS) | (SB105X_ATR_A80);
+			break;
+	}
+
+	sb1054_set_register(port,PAGE_3,SB105X_ATR,atr_status);
+	atr_status = sb1054_get_register(port, PAGE_3, SB105X_ATR);
+
+	return atr_status;
+}
+
+static void mp_stop(struct tty_struct *tty)
+{
+	struct sb_uart_state *state = tty->driver_data;
+	struct sb_uart_port *port = state->port;
+	unsigned long flags;
+
+	spin_lock_irqsave(&port->lock, flags);
+	port->ops->stop_tx(port);
+	spin_unlock_irqrestore(&port->lock, flags);
+}
+
+static void __mp_start(struct tty_struct *tty)
+{
+	struct sb_uart_state *state = tty->driver_data;
+	struct sb_uart_port *port = state->port;
+
+	if (!uart_circ_empty(&state->info->xmit) && state->info->xmit.buf &&
+			!tty->stopped && !tty->hw_stopped)
+		port->ops->start_tx(port);
+}
+
+static void mp_start(struct tty_struct *tty)
+{
+	__mp_start(tty);
+}
+
+static void mp_tasklet_action(unsigned long data)
+{
+	struct sb_uart_state *state = (struct sb_uart_state *)data;
+	struct tty_struct *tty;
+
+	printk("tasklet is called!\n");
+	tty = state->info->tty;
+	tty_wakeup(tty);
+}
+
+static inline void mp_update_mctrl(struct sb_uart_port *port, unsigned int set, unsigned int clear)
+{
+	unsigned int old;
+
+	old = port->mctrl;
+	port->mctrl = (old & ~clear) | set;
+	if (old != port->mctrl)
+		port->ops->set_mctrl(port, port->mctrl);
+}
+
+#define uart_set_mctrl(port,set)	mp_update_mctrl(port,set,0)
+#define uart_clear_mctrl(port,clear)	mp_update_mctrl(port,0,clear)
+
+static int mp_startup(struct sb_uart_state *state, int init_hw)
+{
+	struct sb_uart_info *info = state->info;
+	struct sb_uart_port *port = state->port;
+	unsigned long page;
+	int retval = 0;
+
+	if (info->flags & UIF_INITIALIZED)
+		return 0;
+
+	if (info->tty)
+		set_bit(TTY_IO_ERROR, &info->tty->flags);
+
+	if (port->type == PORT_UNKNOWN)
+		return 0;
+
+	if (!info->xmit.buf) {
+		page = get_zeroed_page(GFP_KERNEL);
+		if (!page)
+			return -ENOMEM;
+
+		info->xmit.buf = (unsigned char *) page;
+			
+		uart_circ_clear(&info->xmit);
+	}
+
+	retval = port->ops->startup(port);
+	if (retval == 0) {
+		if (init_hw) {
+			mp_change_speed(state, NULL);
+
+			if (info->tty->termios.c_cflag & CBAUD)
+				uart_set_mctrl(port, TIOCM_RTS | TIOCM_DTR);
+		}
+
+		info->flags |= UIF_INITIALIZED;
+
+
+		clear_bit(TTY_IO_ERROR, &info->tty->flags);
+	}
+
+	if (retval && capable(CAP_SYS_ADMIN))
+		retval = 0;
+
+	return retval;
+}
+
+static void mp_shutdown(struct sb_uart_state *state)
+{
+	struct sb_uart_info *info = state->info;
+	struct sb_uart_port *port = state->port;
+
+	if (info->tty)
+		set_bit(TTY_IO_ERROR, &info->tty->flags);
+
+	if (info->flags & UIF_INITIALIZED) {
+		info->flags &= ~UIF_INITIALIZED;
+
+		if (!info->tty || (info->tty->termios.c_cflag & HUPCL))
+			uart_clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+
+		wake_up_interruptible(&info->delta_msr_wait);
+
+		port->ops->shutdown(port);
+
+		synchronize_irq(port->irq);
+	}
+	tasklet_kill(&info->tlet);
+
+	if (info->xmit.buf) {
+		free_page((unsigned long)info->xmit.buf);
+		info->xmit.buf = NULL;
+	}
+}
+
+static void mp_change_speed(struct sb_uart_state *state, struct MP_TERMIOS *old_termios)
+{
+	struct tty_struct *tty = state->info->tty;
+	struct sb_uart_port *port = state->port;
+
+	if (!tty || port->type == PORT_UNKNOWN)
+		return;
+
+	if (tty->termios.c_cflag & CRTSCTS)
+		state->info->flags |= UIF_CTS_FLOW;
+	else
+		state->info->flags &= ~UIF_CTS_FLOW;
+
+	if (tty->termios.c_cflag & CLOCAL)
+		state->info->flags &= ~UIF_CHECK_CD;
+	else
+		state->info->flags |= UIF_CHECK_CD;
+
+	port->ops->set_termios(port, &tty->termios, old_termios);
+}
+
+static inline int __mp_put_char(struct sb_uart_port *port, struct circ_buf *circ, unsigned char c)
+{
+	unsigned long flags;
+	int ret = 0;
+
+	if (!circ->buf)
+		return 0;
+
+	spin_lock_irqsave(&port->lock, flags);
+	if (uart_circ_chars_free(circ) != 0) {
+		circ->buf[circ->head] = c;
+		circ->head = (circ->head + 1) & (UART_XMIT_SIZE - 1);
+		ret = 1;
+	}
+	spin_unlock_irqrestore(&port->lock, flags);
+	return ret;
+}
+
+static int mp_put_char(struct tty_struct *tty, unsigned char ch)
+{
+	struct sb_uart_state *state = tty->driver_data;
+
+	return __mp_put_char(state->port, &state->info->xmit, ch);
+}
+
+static void mp_put_chars(struct tty_struct *tty)
+{
+	mp_start(tty);
+}
+
+static int mp_write(struct tty_struct *tty, const unsigned char * buf, int count)
+{
+	struct sb_uart_state *state = tty->driver_data;
+	struct sb_uart_port *port;
+	struct circ_buf *circ;
+	int c, ret = 0;
+
+	if (!state || !state->info) {
+		return -EL3HLT;
+	}
+
+	port = state->port;
+	circ = &state->info->xmit;
+
+	if (!circ->buf)
+		return 0;
+		
+	while (1) {
+		c = CIRC_SPACE_TO_END(circ->head, circ->tail, UART_XMIT_SIZE);
+		if (count < c)
+			c = count;
+		if (c <= 0)
+			break;
+	memcpy(circ->buf + circ->head, buf, c);
+
+		circ->head = (circ->head + c) & (UART_XMIT_SIZE - 1);
+		buf += c;
+		count -= c;
+		ret += c;
+	}
+	mp_start(tty);
+	return ret;
+}
+
+static int mp_write_room(struct tty_struct *tty)
+{
+	struct sb_uart_state *state = tty->driver_data;
+
+	return uart_circ_chars_free(&state->info->xmit);
+}
+
+static int mp_chars_in_buffer(struct tty_struct *tty)
+{
+	struct sb_uart_state *state = tty->driver_data;
+
+	return uart_circ_chars_pending(&state->info->xmit);
+}
+
+static void mp_flush_buffer(struct tty_struct *tty)
+{
+	struct sb_uart_state *state = tty->driver_data;
+	struct sb_uart_port *port = state->port;
+	unsigned long flags;
+
+	if (!state || !state->info) {
+		return;
+	}
+
+	spin_lock_irqsave(&port->lock, flags);
+	uart_circ_clear(&state->info->xmit);
+	spin_unlock_irqrestore(&port->lock, flags);
+	wake_up_interruptible(&tty->write_wait);
+	tty_wakeup(tty);
+}
+
+static void mp_send_xchar(struct tty_struct *tty, char ch)
+{
+	struct sb_uart_state *state = tty->driver_data;
+	struct sb_uart_port *port = state->port;
+	unsigned long flags;
+
+	if (port->ops->send_xchar)
+		port->ops->send_xchar(port, ch);
+	else {
+		port->x_char = ch;
+		if (ch) {
+			spin_lock_irqsave(&port->lock, flags);
+			port->ops->start_tx(port);
+			spin_unlock_irqrestore(&port->lock, flags);
+		}
+	}
+}
+
+static void mp_throttle(struct tty_struct *tty)
+{
+	struct sb_uart_state *state = tty->driver_data;
+
+	if (I_IXOFF(tty))
+		mp_send_xchar(tty, STOP_CHAR(tty));
+
+	if (tty->termios.c_cflag & CRTSCTS)
+		uart_clear_mctrl(state->port, TIOCM_RTS);
+}
+
+static void mp_unthrottle(struct tty_struct *tty)
+{
+	struct sb_uart_state *state = tty->driver_data;
+	struct sb_uart_port *port = state->port;
+
+	if (I_IXOFF(tty)) {
+		if (port->x_char)
+			port->x_char = 0;
+		else
+			mp_send_xchar(tty, START_CHAR(tty));
+	}
+
+	if (tty->termios.c_cflag & CRTSCTS)
+		uart_set_mctrl(port, TIOCM_RTS);
+}
+
+static int mp_get_info(struct sb_uart_state *state, struct serial_struct *retinfo)
+{
+	struct sb_uart_port *port = state->port;
+	struct serial_struct tmp;
+
+	memset(&tmp, 0, sizeof(tmp));
+	tmp.type	    = port->type;
+	tmp.line	    = port->line;
+	tmp.port	    = port->iobase;
+	if (HIGH_BITS_OFFSET)
+		tmp.port_high = (long) port->iobase >> HIGH_BITS_OFFSET;
+	tmp.irq		    = port->irq;
+	tmp.flags	    = port->flags;
+	tmp.xmit_fifo_size  = port->fifosize;
+	tmp.baud_base	    = port->uartclk / 16;
+	tmp.close_delay	    = state->close_delay;
+	tmp.closing_wait    = state->closing_wait == USF_CLOSING_WAIT_NONE ?
+		ASYNC_CLOSING_WAIT_NONE :
+		state->closing_wait;
+	tmp.custom_divisor  = port->custom_divisor;
+	tmp.hub6	    = port->hub6;
+	tmp.io_type         = port->iotype;
+	tmp.iomem_reg_shift = port->regshift;
+	tmp.iomem_base      = (void *)port->mapbase;
+
+	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
+		return -EFAULT;
+	return 0;
+}
+
+static int mp_set_info(struct sb_uart_state *state, struct serial_struct *newinfo)
+{
+	struct serial_struct new_serial;
+	struct sb_uart_port *port = state->port;
+	unsigned long new_port;
+	unsigned int change_irq, change_port, closing_wait;
+	unsigned int old_custom_divisor;
+	unsigned int old_flags, new_flags;
+	int retval = 0;
+
+	if (copy_from_user(&new_serial, newinfo, sizeof(new_serial)))
+		return -EFAULT;
+
+	new_port = new_serial.port;
+	if (HIGH_BITS_OFFSET)
+		new_port += (unsigned long) new_serial.port_high << HIGH_BITS_OFFSET;
+
+	new_serial.irq = irq_canonicalize(new_serial.irq);
+
+	closing_wait = new_serial.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+		USF_CLOSING_WAIT_NONE : new_serial.closing_wait;
+	MP_STATE_LOCK(state);
+
+	change_irq  = new_serial.irq != port->irq;
+	change_port = new_port != port->iobase ||
+		(unsigned long)new_serial.iomem_base != port->mapbase ||
+		new_serial.hub6 != port->hub6 ||
+		new_serial.io_type != port->iotype ||
+		new_serial.iomem_reg_shift != port->regshift ||
+		new_serial.type != port->type;
+	old_flags = port->flags;
+	new_flags = new_serial.flags;
+	old_custom_divisor = port->custom_divisor;
+
+	if (!capable(CAP_SYS_ADMIN)) {
+		retval = -EPERM;
+		if (change_irq || change_port ||
+				(new_serial.baud_base != port->uartclk / 16) ||
+				(new_serial.close_delay != state->close_delay) ||
+				(closing_wait != state->closing_wait) ||
+				(new_serial.xmit_fifo_size != port->fifosize) ||
+				(((new_flags ^ old_flags) & ~UPF_USR_MASK) != 0))
+			goto exit;
+		port->flags = ((port->flags & ~UPF_USR_MASK) |
+				(new_flags & UPF_USR_MASK));
+		port->custom_divisor = new_serial.custom_divisor;
+		goto check_and_exit;
+	}
+
+	if (port->ops->verify_port)
+		retval = port->ops->verify_port(port, &new_serial);
+
+	if ((new_serial.irq >= NR_IRQS) || (new_serial.irq < 0) ||
+			(new_serial.baud_base < 9600))
+		retval = -EINVAL;
+
+	if (retval)
+		goto exit;
+
+	if (change_port || change_irq) {
+		retval = -EBUSY;
+
+		if (uart_users(state) > 1)
+			goto exit;
+
+		mp_shutdown(state);
+	}
+
+	if (change_port) {
+		unsigned long old_iobase, old_mapbase;
+		unsigned int old_type, old_iotype, old_hub6, old_shift;
+
+		old_iobase = port->iobase;
+		old_mapbase = port->mapbase;
+		old_type = port->type;
+		old_hub6 = port->hub6;
+		old_iotype = port->iotype;
+		old_shift = port->regshift;
+
+		if (old_type != PORT_UNKNOWN)
+			port->ops->release_port(port);
+
+		port->iobase = new_port;
+		port->type = new_serial.type;
+		port->hub6 = new_serial.hub6;
+		port->iotype = new_serial.io_type;
+		port->regshift = new_serial.iomem_reg_shift;
+		port->mapbase = (unsigned long)new_serial.iomem_base;
+
+		if (port->type != PORT_UNKNOWN) {
+			retval = port->ops->request_port(port);
+		} else {
+			retval = 0;
+		}
+
+		if (retval && old_type != PORT_UNKNOWN) {
+			port->iobase = old_iobase;
+			port->type = old_type;
+			port->hub6 = old_hub6;
+			port->iotype = old_iotype;
+			port->regshift = old_shift;
+			port->mapbase = old_mapbase;
+			retval = port->ops->request_port(port);
+			if (retval)
+				port->type = PORT_UNKNOWN;
+
+			retval = -EBUSY;
+		}
+	}
+
+	port->irq              = new_serial.irq;
+	port->uartclk          = new_serial.baud_base * 16;
+	port->flags            = (port->flags & ~UPF_CHANGE_MASK) |
+		(new_flags & UPF_CHANGE_MASK);
+	port->custom_divisor   = new_serial.custom_divisor;
+	state->close_delay     = new_serial.close_delay;
+	state->closing_wait    = closing_wait;
+	port->fifosize         = new_serial.xmit_fifo_size;
+	if (state->info->tty)
+		state->info->tty->low_latency =
+			(port->flags & UPF_LOW_LATENCY) ? 1 : 0;
+
+check_and_exit:
+	retval = 0;
+	if (port->type == PORT_UNKNOWN)
+		goto exit;
+	if (state->info->flags & UIF_INITIALIZED) {
+		if (((old_flags ^ port->flags) & UPF_SPD_MASK) ||
+				old_custom_divisor != port->custom_divisor) {
+			if (port->flags & UPF_SPD_MASK) {
+				printk(KERN_NOTICE
+						"%s sets custom speed on ttyMP%d. This "
+						"is deprecated.\n", current->comm,
+						port->line);
+			}
+			mp_change_speed(state, NULL);
+		}
+	} else
+		retval = mp_startup(state, 1);
+exit:
+	MP_STATE_UNLOCK(state);
+	return retval;
+}
+
+
+static int mp_get_lsr_info(struct sb_uart_state *state, unsigned int *value)
+{
+	struct sb_uart_port *port = state->port;
+	unsigned int result;
+
+	result = port->ops->tx_empty(port);
+
+	if (port->x_char ||
+			((uart_circ_chars_pending(&state->info->xmit) > 0) &&
+				!state->info->tty->stopped && !state->info->tty->hw_stopped))
+		result &= ~TIOCSER_TEMT;
+
+	return put_user(result, value);
+}
+
+static int mp_tiocmget(struct tty_struct *tty)
+{
+	struct sb_uart_state *state = tty->driver_data;
+	struct sb_uart_port *port = state->port;
+	int result = -EIO;
+
+	MP_STATE_LOCK(state);
+	if (!(tty->flags & (1 << TTY_IO_ERROR))) {
+		result = port->mctrl;
+		spin_lock_irq(&port->lock);
+		result |= port->ops->get_mctrl(port);
+		spin_unlock_irq(&port->lock);
+	}
+	MP_STATE_UNLOCK(state);
+	return result;
+}
+
+static int mp_tiocmset(struct tty_struct *tty, unsigned int set, unsigned int clear)
+{
+	struct sb_uart_state *state = tty->driver_data;
+	struct sb_uart_port *port = state->port;
+	int ret = -EIO;
+
+
+	MP_STATE_LOCK(state);
+	if (!(tty->flags & (1 << TTY_IO_ERROR))) {
+		mp_update_mctrl(port, set, clear);
+		ret = 0;
+	}
+	MP_STATE_UNLOCK(state);
+
+	return ret;
+}
+
+static int mp_break_ctl(struct tty_struct *tty, int break_state)
+{
+	struct sb_uart_state *state = tty->driver_data;
+	struct sb_uart_port *port = state->port;
+
+	MP_STATE_LOCK(state);
+
+	if (port->type != PORT_UNKNOWN)
+		port->ops->break_ctl(port, break_state);
+
+	MP_STATE_UNLOCK(state);
+	return 0;
+}
+
+static int mp_do_autoconfig(struct sb_uart_state *state)
+{
+	struct sb_uart_port *port = state->port;
+	int flags, ret;
+
+	if (!capable(CAP_SYS_ADMIN))
+		return -EPERM;
+
+	if (mutex_lock_interruptible(&state->mutex))
+		return -ERESTARTSYS;
+	ret = -EBUSY;
+	if (uart_users(state) == 1) {
+		mp_shutdown(state);
+
+		if (port->type != PORT_UNKNOWN)
+			port->ops->release_port(port);
+
+		flags = UART_CONFIG_TYPE;
+		if (port->flags & UPF_AUTO_IRQ)
+			flags |= UART_CONFIG_IRQ;
+
+		port->ops->config_port(port, flags);
+
+		ret = mp_startup(state, 1);
+	}
+	MP_STATE_UNLOCK(state);
+	return ret;
+}
+
+static int mp_wait_modem_status(struct sb_uart_state *state, unsigned long arg)
+{
+	struct sb_uart_port *port = state->port;
+	DECLARE_WAITQUEUE(wait, current);
+	struct sb_uart_icount cprev, cnow;
+	int ret;
+
+	spin_lock_irq(&port->lock);
+	memcpy(&cprev, &port->icount, sizeof(struct sb_uart_icount));
+
+	port->ops->enable_ms(port);
+	spin_unlock_irq(&port->lock);
+
+	add_wait_queue(&state->info->delta_msr_wait, &wait);
+	for (;;) {
+		spin_lock_irq(&port->lock);
+		memcpy(&cnow, &port->icount, sizeof(struct sb_uart_icount));
+		spin_unlock_irq(&port->lock);
+
+		set_current_state(TASK_INTERRUPTIBLE);
+
+		if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
+				((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
+				((arg & TIOCM_CD)  && (cnow.dcd != cprev.dcd)) ||
+				((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
+			ret = 0;
+			break;
+		}
+
+		schedule();
+
+		if (signal_pending(current)) {
+			ret = -ERESTARTSYS;
+			break;
+		}
+
+		cprev = cnow;
+	}
+
+	current->state = TASK_RUNNING;
+	remove_wait_queue(&state->info->delta_msr_wait, &wait);
+
+	return ret;
+}
+
+static int mp_get_count(struct sb_uart_state *state, struct serial_icounter_struct *icnt)
+{
+	struct serial_icounter_struct icount;
+	struct sb_uart_icount cnow;
+	struct sb_uart_port *port = state->port;
+
+	spin_lock_irq(&port->lock);
+	memcpy(&cnow, &port->icount, sizeof(struct sb_uart_icount));
+	spin_unlock_irq(&port->lock);
+
+	icount.cts         = cnow.cts;
+	icount.dsr         = cnow.dsr;
+	icount.rng         = cnow.rng;
+	icount.dcd         = cnow.dcd;
+	icount.rx          = cnow.rx;
+	icount.tx          = cnow.tx;
+	icount.frame       = cnow.frame;
+	icount.overrun     = cnow.overrun;
+	icount.parity      = cnow.parity;
+	icount.brk         = cnow.brk;
+	icount.buf_overrun = cnow.buf_overrun;
+
+	return copy_to_user(icnt, &icount, sizeof(icount)) ? -EFAULT : 0;
+}
+
+static int mp_ioctl(struct tty_struct *tty, unsigned int cmd, unsigned long arg)
+{
+	struct sb_uart_state *state = tty->driver_data;
+	struct mp_port *info = (struct mp_port *)state->port;
+	int ret = -ENOIOCTLCMD;
+
+
+	switch (cmd) {
+		case TIOCSMULTIDROP:
+			/* set multi-drop mode enable or disable, and default operation mode is H/W mode */
+			if (info->port.type == PORT_16C105XA)
+			{
+				//arg &= ~0x6;
+				//state->port->mdmode = 0;
+				return set_multidrop_mode((struct sb_uart_port *)info, (unsigned int)arg);
+			}
+			ret = -ENOTSUPP;
+			break;
+		case GETDEEPFIFO:
+			ret = get_deep_fifo(state->port);
+			return ret;
+		case SETDEEPFIFO:
+			ret = set_deep_fifo(state->port,arg);
+			deep[state->port->line] = arg;
+			return ret;
+		case SETTTR:
+			if (info->port.type == PORT_16C105X || info->port.type == PORT_16C105XA){
+				ret = sb1054_set_register(state->port,PAGE_4,SB105X_TTR,arg);
+				ttr[state->port->line] = arg;
+			}
+			return ret;
+		case SETRTR:
+			if (info->port.type == PORT_16C105X || info->port.type == PORT_16C105XA){
+				ret = sb1054_set_register(state->port,PAGE_4,SB105X_RTR,arg);
+				rtr[state->port->line] = arg;
+			}
+			return ret;
+		case GETTTR:
+			if (info->port.type == PORT_16C105X || info->port.type == PORT_16C105XA){
+				ret = sb1054_get_register(state->port,PAGE_4,SB105X_TTR);
+			}
+			return ret;
+		case GETRTR:
+			if (info->port.type == PORT_16C105X || info->port.type == PORT_16C105XA){
+				ret = sb1054_get_register(state->port,PAGE_4,SB105X_RTR);
+			}
+			return ret;
+
+		case SETFCR:
+			if (info->port.type == PORT_16C105X || info->port.type == PORT_16C105XA){
+				ret = sb1054_set_register(state->port,PAGE_1,SB105X_FCR,arg);
+			}
+			else{
+				serial_out(info,2,arg);
+			}
+
+			return ret;
+		case TIOCSMDADDR:
+			/* set multi-drop address */
+			if (info->port.type == PORT_16C105XA)
+			{
+				state->port->mdmode |= MDMODE_ADDR;
+				return set_multidrop_addr((struct sb_uart_port *)info, (unsigned int)arg);
+			}
+			ret = -ENOTSUPP;
+			break;
+
+		case TIOCGMDADDR:
+			/* set multi-drop address */
+			if ((info->port.type == PORT_16C105XA) && (state->port->mdmode & MDMODE_ADDR))
+			{
+				return get_multidrop_addr((struct sb_uart_port *)info);
+			}
+			ret = -ENOTSUPP;
+			break;
+
+		case TIOCSENDADDR:
+			/* send address in multi-drop mode */
+			if ((info->port.type == PORT_16C105XA) 
+					&& (state->port->mdmode & (MDMODE_ENABLE)))
+			{
+				if (mp_chars_in_buffer(tty) > 0)
+				{
+					tty_wait_until_sent(tty, 0);
+				}
+				//while ((serial_in(info, UART_LSR) & 0x60) != 0x60);
+				//while (sb1054_get_register(state->port, PAGE_2, SB105X_TFCR) != 0);
+				while ((serial_in(info, UART_LSR) & 0x60) != 0x60);
+				serial_out(info, UART_SCR, (int)arg);
+			}
+			break;
+
+		case TIOCGSERIAL:
+			ret = mp_get_info(state, (struct serial_struct *)arg);
+			break;
+
+		case TIOCSSERIAL:
+			ret = mp_set_info(state, (struct serial_struct *)arg);
+			break;
+
+		case TIOCSERCONFIG:
+			ret = mp_do_autoconfig(state);
+			break;
+
+		case TIOCSERGWILD: /* obsolete */
+		case TIOCSERSWILD: /* obsolete */
+			ret = 0;
+			break;
+			/* for Multiport */
+		case TIOCGNUMOFPORT: /* Get number of ports */
+			return NR_PORTS;
+		case TIOCGGETDEVID:
+			return mp_devs[arg].device_id;
+		case TIOCGGETREV:
+			return mp_devs[arg].revision;
+		case TIOCGGETNRPORTS:
+			return mp_devs[arg].nr_ports;
+		case TIOCGGETBDNO:
+			return NR_BOARD;
+		case TIOCGGETINTERFACE:
+			if (mp_devs[arg].revision == 0xc0)
+			{
+				/* for SB16C1053APCI */
+				return (sb1053a_get_interface(info, info->port.line));
+			}
+			else
+			{
+				return (inb(mp_devs[arg].option_reg_addr+MP_OPTR_IIR0+(state->port->line/8)));
+			}
+		case TIOCGGETPORTTYPE:
+			ret = get_device_type(arg);;
+			return ret;
+		case TIOCSMULTIECHO: /* set to multi-drop mode(RS422) or echo mode(RS485)*/
+			outb( ( inb(info->interface_config_addr) & ~0x03 ) | 0x01 ,  
+					info->interface_config_addr);
+			return 0;
+		case TIOCSPTPNOECHO: /* set to multi-drop mode(RS422) or echo mode(RS485) */
+			outb( ( inb(info->interface_config_addr) & ~0x03 )  ,             
+					info->interface_config_addr);
+			return 0;
+	}
+
+	if (ret != -ENOIOCTLCMD)
+		goto out;
+
+	if (tty->flags & (1 << TTY_IO_ERROR)) {
+		ret = -EIO;
+		goto out;
+	}
+
+	switch (cmd) {
+		case TIOCMIWAIT:
+			ret = mp_wait_modem_status(state, arg);
+			break;
+
+		case TIOCGICOUNT:
+			ret = mp_get_count(state, (struct serial_icounter_struct *)arg);
+			break;
+	}
+
+	if (ret != -ENOIOCTLCMD)
+		goto out;
+
+	MP_STATE_LOCK(state);
+	switch (cmd) {
+		case TIOCSERGETLSR: /* Get line status register */
+			ret = mp_get_lsr_info(state, (unsigned int *)arg);
+			break;
+
+		default: {
+					struct sb_uart_port *port = state->port;
+					if (port->ops->ioctl)
+						ret = port->ops->ioctl(port, cmd, arg);
+					break;
+				}
+	}
+
+	MP_STATE_UNLOCK(state);
+out:
+	return ret;
+}
+
+static void mp_set_termios(struct tty_struct *tty, struct MP_TERMIOS *old_termios)
+{
+	struct sb_uart_state *state = tty->driver_data;
+	unsigned long flags;
+	unsigned int cflag = tty->termios.c_cflag;
+
+#define RELEVANT_IFLAG(iflag)	((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+
+	if ((cflag ^ old_termios->c_cflag) == 0 &&
+			RELEVANT_IFLAG(tty->termios.c_iflag ^ old_termios->c_iflag) == 0)
+		return;
+
+	mp_change_speed(state, old_termios);
+
+	if ((old_termios->c_cflag & CBAUD) && !(cflag & CBAUD))
+		uart_clear_mctrl(state->port, TIOCM_RTS | TIOCM_DTR);
+
+	if (!(old_termios->c_cflag & CBAUD) && (cflag & CBAUD)) {
+		unsigned int mask = TIOCM_DTR;
+		if (!(cflag & CRTSCTS) ||
+				!test_bit(TTY_THROTTLED, &tty->flags))
+			mask |= TIOCM_RTS;
+		uart_set_mctrl(state->port, mask);
+	}
+
+	if ((old_termios->c_cflag & CRTSCTS) && !(cflag & CRTSCTS)) {
+		spin_lock_irqsave(&state->port->lock, flags);
+		tty->hw_stopped = 0;
+		__mp_start(tty);
+		spin_unlock_irqrestore(&state->port->lock, flags);
+	}
+
+	if (!(old_termios->c_cflag & CRTSCTS) && (cflag & CRTSCTS)) {
+		spin_lock_irqsave(&state->port->lock, flags);
+		if (!(state->port->ops->get_mctrl(state->port) & TIOCM_CTS)) {
+			tty->hw_stopped = 1;
+			state->port->ops->stop_tx(state->port);
+		}
+		spin_unlock_irqrestore(&state->port->lock, flags);
+	}
+}
+
+static void mp_close(struct tty_struct *tty, struct file *filp)
+{
+	struct sb_uart_state *state = tty->driver_data;
+	struct sb_uart_port *port;
+
+	printk("mp_close!\n");
+	if (!state || !state->port)
+		return;
+
+	port = state->port;
+
+	printk("close1 %d\n", __LINE__);
+	MP_STATE_LOCK(state);
+
+	printk("close2 %d\n", __LINE__);
+	if (tty_hung_up_p(filp))
+		goto done;
+
+	printk("close3 %d\n", __LINE__);
+	if ((tty->count == 1) && (state->count != 1)) {
+		printk("mp_close: bad serial port count; tty->count is 1, "
+				"state->count is %d\n", state->count);
+		state->count = 1;
+	}
+	printk("close4 %d\n", __LINE__);
+	if (--state->count < 0) {
+		printk("rs_close: bad serial port count for ttyMP%d: %d\n",
+				port->line, state->count);
+		state->count = 0;
+	}
+	if (state->count)
+		goto done;
+
+	tty->closing = 1;
+
+	printk("close5 %d\n", __LINE__);
+	if (state->closing_wait != USF_CLOSING_WAIT_NONE)
+		tty_wait_until_sent(tty, state->closing_wait);
+
+	printk("close6 %d\n", __LINE__);
+	if (state->info->flags & UIF_INITIALIZED) {
+		unsigned long flags;
+		spin_lock_irqsave(&port->lock, flags);
+		port->ops->stop_rx(port);
+		spin_unlock_irqrestore(&port->lock, flags);
+		mp_wait_until_sent(tty, port->timeout);
+	}
+	printk("close7 %d\n", __LINE__);
+
+	mp_shutdown(state);
+	printk("close8 %d\n", __LINE__);
+	mp_flush_buffer(tty);
+	tty_ldisc_flush(tty);
+	tty->closing = 0;
+	state->info->tty = NULL;
+	if (state->info->blocked_open) 
+	{
+		if (state->close_delay)
+		{
+			set_current_state(TASK_INTERRUPTIBLE);
+			schedule_timeout(state->close_delay);
+		}
+	}
+	else
+	{
+		mp_change_pm(state, 3);
+	}
+	printk("close8 %d\n", __LINE__);
+
+	state->info->flags &= ~UIF_NORMAL_ACTIVE;
+	wake_up_interruptible(&state->info->open_wait);
+
+done:
+	printk("close done\n");
+	MP_STATE_UNLOCK(state);
+	module_put(THIS_MODULE);
+}
+
+static void mp_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+	struct sb_uart_state *state = tty->driver_data;
+	struct sb_uart_port *port = state->port;
+	unsigned long char_time, expire;
+
+	if (port->type == PORT_UNKNOWN || port->fifosize == 0)
+		return;
+
+	char_time = (port->timeout - HZ/50) / port->fifosize;
+	char_time = char_time / 5;
+	if (char_time == 0)
+		char_time = 1;
+	if (timeout && timeout < char_time)
+		char_time = timeout;
+
+	if (timeout == 0 || timeout > 2 * port->timeout)
+		timeout = 2 * port->timeout;
+
+	expire = jiffies + timeout;
+
+	while (!port->ops->tx_empty(port)) {
+		set_current_state(TASK_INTERRUPTIBLE);
+		schedule_timeout(char_time);
+		if (signal_pending(current))
+			break;
+		if (time_after(jiffies, expire))
+			break;
+	}
+	set_current_state(TASK_RUNNING); /* might not be needed */
+}
+
+static void mp_hangup(struct tty_struct *tty)
+{
+	struct sb_uart_state *state = tty->driver_data;
+
+	MP_STATE_LOCK(state);
+	if (state->info && state->info->flags & UIF_NORMAL_ACTIVE) {
+		mp_flush_buffer(tty);
+		mp_shutdown(state);
+		state->count = 0;
+		state->info->flags &= ~UIF_NORMAL_ACTIVE;
+		state->info->tty = NULL;
+		wake_up_interruptible(&state->info->open_wait);
+		wake_up_interruptible(&state->info->delta_msr_wait);
+	}
+	MP_STATE_UNLOCK(state);
+}
+
+static void mp_update_termios(struct sb_uart_state *state)
+{
+	struct tty_struct *tty = state->info->tty;
+	struct sb_uart_port *port = state->port;
+
+	if (!(tty->flags & (1 << TTY_IO_ERROR))) {
+		mp_change_speed(state, NULL);
+
+		if (tty->termios.c_cflag & CBAUD)
+			uart_set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
+	}
+}
+
+static int mp_block_til_ready(struct file *filp, struct sb_uart_state *state)
+{
+	DECLARE_WAITQUEUE(wait, current);
+	struct sb_uart_info *info = state->info;
+	struct sb_uart_port *port = state->port;
+	unsigned int mctrl;
+
+	info->blocked_open++;
+	state->count--;
+
+	add_wait_queue(&info->open_wait, &wait);
+	while (1) {
+		set_current_state(TASK_INTERRUPTIBLE);
+
+		if (tty_hung_up_p(filp) || info->tty == NULL)
+			break;
+
+		if (!(info->flags & UIF_INITIALIZED))
+			break;
+
+		if ((filp->f_flags & O_NONBLOCK) ||
+				(info->tty->termios.c_cflag & CLOCAL) ||
+				(info->tty->flags & (1 << TTY_IO_ERROR))) {
+			break;
+		}
+
+		if (info->tty->termios.c_cflag & CBAUD)
+			uart_set_mctrl(port, TIOCM_DTR);
+
+		spin_lock_irq(&port->lock);
+		port->ops->enable_ms(port);
+		mctrl = port->ops->get_mctrl(port);
+		spin_unlock_irq(&port->lock);
+		if (mctrl & TIOCM_CAR)
+			break;
+
+		MP_STATE_UNLOCK(state);
+		schedule();
+		MP_STATE_LOCK(state);
+
+		if (signal_pending(current))
+			break;
+	}
+	set_current_state(TASK_RUNNING);
+	remove_wait_queue(&info->open_wait, &wait);
+
+	state->count++;
+	info->blocked_open--;
+
+	if (signal_pending(current))
+		return -ERESTARTSYS;
+
+	if (!info->tty || tty_hung_up_p(filp))
+		return -EAGAIN;
+
+	return 0;
+}
+
+static struct sb_uart_state *uart_get(struct uart_driver *drv, int line)
+{
+	struct sb_uart_state *state;
+
+	MP_MUTEX_LOCK(mp_mutex);
+	state = drv->state + line;
+	if (mutex_lock_interruptible(&state->mutex)) {
+		state = ERR_PTR(-ERESTARTSYS);
+		goto out;
+	}
+	state->count++;
+	if (!state->port) {
+		state->count--;
+		MP_STATE_UNLOCK(state);
+		state = ERR_PTR(-ENXIO);
+		goto out;
+	}
+
+	if (!state->info) {
+		state->info = kmalloc(sizeof(struct sb_uart_info), GFP_KERNEL);
+		if (state->info) {
+			memset(state->info, 0, sizeof(struct sb_uart_info));
+			init_waitqueue_head(&state->info->open_wait);
+			init_waitqueue_head(&state->info->delta_msr_wait);
+
+			state->port->info = state->info;
+
+			tasklet_init(&state->info->tlet, mp_tasklet_action,
+					(unsigned long)state);
+		} else {
+			state->count--;
+			MP_STATE_UNLOCK(state);
+			state = ERR_PTR(-ENOMEM);
+		}
+	}
+
+out:
+	MP_MUTEX_UNLOCK(mp_mutex);
+	return state;
+}
+
+static int mp_open(struct tty_struct *tty, struct file *filp)
+{
+	struct uart_driver *drv = (struct uart_driver *)tty->driver->driver_state;
+	struct sb_uart_state *state;
+	int retval;
+	int  line = tty->index;
+	struct mp_port *mtpt;
+
+	retval = -ENODEV;
+	if (line >= tty->driver->num)
+		goto fail;
+
+	state = uart_get(drv, line);
+
+	mtpt  = (struct mp_port *)state->port;
+
+	if (IS_ERR(state)) {
+		retval = PTR_ERR(state);
+		goto fail;
+	}
+
+	tty->driver_data = state;
+	tty->low_latency = (state->port->flags & UPF_LOW_LATENCY) ? 1 : 0;
+	tty->alt_speed = 0;
+	state->info->tty = tty;
+
+	if (tty_hung_up_p(filp)) {
+		retval = -EAGAIN;
+		state->count--;
+		MP_STATE_UNLOCK(state);
+		goto fail;
+	}
+
+	if (state->count == 1)
+		mp_change_pm(state, 0);
+
+	retval = mp_startup(state, 0);
+
+	if (retval == 0)
+		retval = mp_block_til_ready(filp, state);
+	MP_STATE_UNLOCK(state);
+
+	if (retval == 0 && !(state->info->flags & UIF_NORMAL_ACTIVE)) {
+		state->info->flags |= UIF_NORMAL_ACTIVE;
+
+		mp_update_termios(state);
+	}
+
+	uart_clear_mctrl(state->port, TIOCM_RTS);
+	try_module_get(THIS_MODULE);
+fail:
+	return retval;
+}
+
+
+static const char *mp_type(struct sb_uart_port *port)
+{
+	const char *str = NULL;
+
+	if (port->ops->type)
+		str = port->ops->type(port);
+
+	if (!str)
+		str = "unknown";
+
+	return str;
+}
+
+static void mp_change_pm(struct sb_uart_state *state, int pm_state)
+{
+	struct sb_uart_port *port = state->port;
+	if (port->ops->pm)
+		port->ops->pm(port, pm_state, state->pm_state);
+	state->pm_state = pm_state;
+}
+
+static inline void mp_report_port(struct uart_driver *drv, struct sb_uart_port *port)
+{
+	char address[64];
+
+	switch (port->iotype) {
+		case UPIO_PORT:
+			snprintf(address, sizeof(address),"I/O 0x%x", port->iobase);
+			break;
+		case UPIO_HUB6:
+			snprintf(address, sizeof(address),"I/O 0x%x offset 0x%x", port->iobase, port->hub6);
+			break;
+		case UPIO_MEM:
+			snprintf(address, sizeof(address),"MMIO 0x%lx", port->mapbase);
+			break;
+		default:
+			snprintf(address, sizeof(address),"*unknown*" );
+			strlcpy(address, "*unknown*", sizeof(address));
+			break;
+	}
+
+	printk( "%s%d at %s (irq = %d) is a %s\n",
+			drv->dev_name, port->line, address, port->irq, mp_type(port));
+
+}
+
+static void mp_configure_port(struct uart_driver *drv, struct sb_uart_state *state, struct sb_uart_port *port)
+{
+	unsigned int flags;
+
+
+	if (!port->iobase && !port->mapbase && !port->membase)
+	{
+		DPRINTK("%s error \n",__FUNCTION__);
+		return;
+	}
+	flags = UART_CONFIG_TYPE;
+	if (port->flags & UPF_AUTO_IRQ)
+		flags |= UART_CONFIG_IRQ;
+	if (port->flags & UPF_BOOT_AUTOCONF) {
+		port->type = PORT_UNKNOWN;
+		port->ops->config_port(port, flags);
+	}
+
+	if (port->type != PORT_UNKNOWN) {
+		unsigned long flags;
+
+		mp_report_port(drv, port);
+
+		spin_lock_irqsave(&port->lock, flags);
+		port->ops->set_mctrl(port, 0);
+		spin_unlock_irqrestore(&port->lock, flags);
+
+		mp_change_pm(state, 3);
+	}
+}
+
+static void mp_unconfigure_port(struct uart_driver *drv, struct sb_uart_state *state)
+{
+	struct sb_uart_port *port = state->port;
+	struct sb_uart_info *info = state->info;
+
+	if (info && info->tty)
+		tty_hangup(info->tty);
+
+	MP_STATE_LOCK(state);
+
+	state->info = NULL;
+
+	if (port->type != PORT_UNKNOWN)
+		port->ops->release_port(port);
+
+	port->type = PORT_UNKNOWN;
+
+	if (info) {
+		tasklet_kill(&info->tlet);
+		kfree(info);
+	}
+
+	MP_STATE_UNLOCK(state);
+}
+static struct tty_operations mp_ops = {
+	.open		= mp_open,
+	.close		= mp_close,
+	.write		= mp_write,
+	.put_char	= mp_put_char,
+	.flush_chars	= mp_put_chars,
+	.write_room	= mp_write_room,
+	.chars_in_buffer= mp_chars_in_buffer,
+	.flush_buffer	= mp_flush_buffer,
+	.ioctl		= mp_ioctl,
+	.throttle	= mp_throttle,
+	.unthrottle	= mp_unthrottle,
+	.send_xchar	= mp_send_xchar,
+	.set_termios	= mp_set_termios,
+	.stop		= mp_stop,
+	.start		= mp_start,
+	.hangup		= mp_hangup,
+	.break_ctl	= mp_break_ctl,
+	.wait_until_sent= mp_wait_until_sent,
+#ifdef CONFIG_PROC_FS
+	.proc_fops	= NULL,
+#endif
+	.tiocmget	= mp_tiocmget,
+	.tiocmset	= mp_tiocmset,
+};
+
+static int mp_register_driver(struct uart_driver *drv)
+{
+	struct tty_driver *normal = NULL;
+	int i, retval;
+
+	drv->state = kmalloc(sizeof(struct sb_uart_state) * drv->nr, GFP_KERNEL);
+	retval = -ENOMEM;
+	if (!drv->state)
+	{
+		printk("SB PCI Error: Kernel memory allocation error!\n");
+		goto out;
+	}
+	memset(drv->state, 0, sizeof(struct sb_uart_state) * drv->nr);
+
+	normal = alloc_tty_driver(drv->nr);
+	if (!normal)
+	{
+		printk("SB PCI Error: tty allocation error!\n");
+		goto out;
+	}
+
+	drv->tty_driver = normal;
+
+	normal->owner           = drv->owner;
+	normal->magic		= TTY_DRIVER_MAGIC;
+	normal->driver_name     = drv->driver_name;
+	normal->name		= drv->dev_name;
+	normal->major		= drv->major;
+	normal->minor_start	= drv->minor;
+
+	normal->num		= MAX_MP_PORT ; 
+
+	normal->type		= TTY_DRIVER_TYPE_SERIAL;
+	normal->subtype		= SERIAL_TYPE_NORMAL;
+	normal->init_termios	= tty_std_termios;
+	normal->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+	normal->flags		= TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+	normal->driver_state    = drv;
+
+	tty_set_operations(normal, &mp_ops);
+
+for (i = 0; i < drv->nr; i++) {
+	struct sb_uart_state *state = drv->state + i;
+
+	state->close_delay     = 500;   
+	state->closing_wait    = 30000; 
+
+	mutex_init(&state->mutex);
+	}
+
+	retval = tty_register_driver(normal);
+out:
+	if (retval < 0) {
+		printk("Register tty driver Fail!\n");
+		put_tty_driver(normal);
+		kfree(drv->state);
+	}
+
+	return retval;
+}
+
+void mp_unregister_driver(struct uart_driver *drv)
+{
+    struct tty_driver *normal = NULL;
+
+    normal = drv->tty_driver;
+
+    if (!normal)
+    {
+        return;
+    }
+
+    tty_unregister_driver(normal);
+    put_tty_driver(normal);
+    drv->tty_driver = NULL;
+
+
+    if (drv->state)
+    {
+        kfree(drv->state);
+    }
+
+}
+
+static int mp_add_one_port(struct uart_driver *drv, struct sb_uart_port *port)
+{
+	struct sb_uart_state *state;
+	int ret = 0;
+
+
+	if (port->line >= drv->nr)
+		return -EINVAL;
+
+	state = drv->state + port->line;
+
+	MP_MUTEX_LOCK(mp_mutex);
+	if (state->port) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	state->port = port;
+
+	spin_lock_init(&port->lock);
+	port->cons = drv->cons;
+	port->info = state->info;
+
+	mp_configure_port(drv, state, port);
+
+	tty_register_device(drv->tty_driver, port->line, port->dev);
+
+out:
+	MP_MUTEX_UNLOCK(mp_mutex);
+
+
+	return ret;
+}
+
+static int mp_remove_one_port(struct uart_driver *drv, struct sb_uart_port *port)
+{
+	struct sb_uart_state *state = drv->state + port->line;
+
+	if (state->port != port)
+		printk(KERN_ALERT "Removing wrong port: %p != %p\n",
+				state->port, port);
+
+	MP_MUTEX_LOCK(mp_mutex);
+
+	tty_unregister_device(drv->tty_driver, port->line);
+
+	mp_unconfigure_port(drv, state);
+	state->port = NULL;
+	MP_MUTEX_UNLOCK(mp_mutex);
+
+	return 0;
+}
+
+static void autoconfig(struct mp_port *mtpt, unsigned int probeflags)
+{
+	unsigned char status1, scratch, scratch2, scratch3;
+	unsigned char save_lcr, save_mcr;
+	unsigned long flags;
+
+	unsigned char u_type;
+	unsigned char b_ret = 0;
+
+	if (!mtpt->port.iobase && !mtpt->port.mapbase && !mtpt->port.membase)
+		return;
+
+	DEBUG_AUTOCONF("ttyMP%d: autoconf (0x%04x, 0x%p): ",
+			mtpt->port.line, mtpt->port.iobase, mtpt->port.membase);
+
+	spin_lock_irqsave(&mtpt->port.lock, flags);
+
+	if (!(mtpt->port.flags & UPF_BUGGY_UART)) {
+		scratch = serial_inp(mtpt, UART_IER);
+		serial_outp(mtpt, UART_IER, 0);
+#ifdef __i386__
+		outb(0xff, 0x080);
+#endif
+		scratch2 = serial_inp(mtpt, UART_IER) & 0x0f;
+		serial_outp(mtpt, UART_IER, 0x0F);
+#ifdef __i386__
+		outb(0, 0x080);
+#endif
+		scratch3 = serial_inp(mtpt, UART_IER) & 0x0F;
+		serial_outp(mtpt, UART_IER, scratch);
+		if (scratch2 != 0 || scratch3 != 0x0F) {
+			DEBUG_AUTOCONF("IER test failed (%02x, %02x) ",
+					scratch2, scratch3);
+			goto out;
+		}
+	}
+
+	save_mcr = serial_in(mtpt, UART_MCR);
+	save_lcr = serial_in(mtpt, UART_LCR);
+
+	if (!(mtpt->port.flags & UPF_SKIP_TEST)) {
+		serial_outp(mtpt, UART_MCR, UART_MCR_LOOP | 0x0A);
+		status1 = serial_inp(mtpt, UART_MSR) & 0xF0;
+		serial_outp(mtpt, UART_MCR, save_mcr);
+		if (status1 != 0x90) {
+			DEBUG_AUTOCONF("LOOP test failed (%02x) ",
+					status1);
+			goto out;
+		}
+	}
+
+	serial_outp(mtpt, UART_LCR, 0xBF);
+	serial_outp(mtpt, UART_EFR, 0);
+	serial_outp(mtpt, UART_LCR, 0);
+
+	serial_outp(mtpt, UART_FCR, UART_FCR_ENABLE_FIFO);
+	scratch = serial_in(mtpt, UART_IIR) >> 6;
+
+	DEBUG_AUTOCONF("iir=%d ", scratch);
+	if(mtpt->device->nr_ports >= 8)
+		b_ret = read_option_register(mtpt,(MP_OPTR_DIR0 + ((mtpt->port.line)/8)));
+	else	
+		b_ret = read_option_register(mtpt,MP_OPTR_DIR0);
+	u_type = (b_ret & 0xf0) >> 4;
+	if(mtpt->port.type == PORT_UNKNOWN )
+	{
+		switch (u_type)
+		{
+			case DIR_UART_16C550:
+				mtpt->port.type = PORT_16C55X;
+				break;
+			case DIR_UART_16C1050:
+				mtpt->port.type = PORT_16C105X;
+				break;
+			case DIR_UART_16C1050A:
+				if (mtpt->port.line < 2)
+				{
+					mtpt->port.type = PORT_16C105XA;
+				}
+				else
+				{
+					if (mtpt->device->device_id & 0x50)
+					{
+						mtpt->port.type = PORT_16C55X;
+					}
+					else
+					{
+						mtpt->port.type = PORT_16C105X;
+					}
+				}
+				break;
+			default:	
+				mtpt->port.type = PORT_UNKNOWN;
+				break;
+		}
+	}
+
+	if(mtpt->port.type == PORT_UNKNOWN )
+	{
+printk("unknow2\n");
+		switch (scratch) {
+			case 0:
+			case 1:
+				mtpt->port.type = PORT_UNKNOWN;
+				break;
+			case 2:
+			case 3:
+				mtpt->port.type = PORT_16C55X;
+				break;
+		}
+	}
+
+	serial_outp(mtpt, UART_LCR, save_lcr);
+
+	mtpt->port.fifosize = uart_config[mtpt->port.type].dfl_xmit_fifo_size;
+	mtpt->capabilities = uart_config[mtpt->port.type].flags;
+
+	if (mtpt->port.type == PORT_UNKNOWN)
+		goto out;
+	serial_outp(mtpt, UART_MCR, save_mcr);
+	serial_outp(mtpt, UART_FCR, (UART_FCR_ENABLE_FIFO |
+				UART_FCR_CLEAR_RCVR |
+				UART_FCR_CLEAR_XMIT));
+	serial_outp(mtpt, UART_FCR, 0);
+	(void)serial_in(mtpt, UART_RX);
+	serial_outp(mtpt, UART_IER, 0);
+
+out:
+	spin_unlock_irqrestore(&mtpt->port.lock, flags);
+	DEBUG_AUTOCONF("type=%s\n", uart_config[mtpt->port.type].name);
+}
+
+static void autoconfig_irq(struct mp_port *mtpt)
+{
+	unsigned char save_mcr, save_ier;
+	unsigned long irqs;
+	int irq;
+
+	/* forget possible initially masked and pending IRQ */
+	probe_irq_off(probe_irq_on());
+	save_mcr = serial_inp(mtpt, UART_MCR);
+	save_ier = serial_inp(mtpt, UART_IER);
+	serial_outp(mtpt, UART_MCR, UART_MCR_OUT1 | UART_MCR_OUT2);
+
+	irqs = probe_irq_on();
+	serial_outp(mtpt, UART_MCR, 0);
+	serial_outp(mtpt, UART_MCR,
+		UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2);
+
+	serial_outp(mtpt, UART_IER, 0x0f);    /* enable all intrs */
+	(void)serial_inp(mtpt, UART_LSR);
+	(void)serial_inp(mtpt, UART_RX);
+	(void)serial_inp(mtpt, UART_IIR);
+	(void)serial_inp(mtpt, UART_MSR);
+	serial_outp(mtpt, UART_TX, 0xFF);
+	irq = probe_irq_off(irqs);
+
+	serial_outp(mtpt, UART_MCR, save_mcr);
+	serial_outp(mtpt, UART_IER, save_ier);
+
+	mtpt->port.irq = (irq > 0) ? irq : 0;
+}
+
+static void multi_stop_tx(struct sb_uart_port *port)
+{
+	struct mp_port *mtpt = (struct mp_port *)port;
+
+	if (mtpt->ier & UART_IER_THRI) {
+		mtpt->ier &= ~UART_IER_THRI;
+		serial_out(mtpt, UART_IER, mtpt->ier);
+	}
+
+	tasklet_schedule(&port->info->tlet);
+}
+
+static void multi_start_tx(struct sb_uart_port *port)
+{
+	struct mp_port *mtpt = (struct mp_port *)port;
+
+	if (!(mtpt->ier & UART_IER_THRI)) {
+		mtpt->ier |= UART_IER_THRI;
+		serial_out(mtpt, UART_IER, mtpt->ier);
+	}
+}
+
+static void multi_stop_rx(struct sb_uart_port *port)
+{
+	struct mp_port *mtpt = (struct mp_port *)port;
+
+	mtpt->ier &= ~UART_IER_RLSI;
+	mtpt->port.read_status_mask &= ~UART_LSR_DR;
+	serial_out(mtpt, UART_IER, mtpt->ier);
+}
+
+static void multi_enable_ms(struct sb_uart_port *port)
+{
+	struct mp_port *mtpt = (struct mp_port *)port;
+
+	mtpt->ier |= UART_IER_MSI;
+	serial_out(mtpt, UART_IER, mtpt->ier);
+}
+
+
+static _INLINE_ void receive_chars(struct mp_port *mtpt, int *status )
+{
+	struct tty_struct *tty = mtpt->port.info->tty;
+	unsigned char lsr = *status;
+	int max_count = 256;
+	unsigned char ch;
+	char flag;
+
+	//lsr &= mtpt->port.read_status_mask;
+
+	do {
+		if ((lsr & UART_LSR_PE) && (mtpt->port.mdmode & MDMODE_ENABLE))
+		{
+			ch = serial_inp(mtpt, UART_RX);
+		}
+		else if (lsr & UART_LSR_SPECIAL) 
+		{
+			flag = 0;
+			ch = serial_inp(mtpt, UART_RX);
+
+			if (lsr & UART_LSR_BI) 
+			{
+
+				mtpt->port.icount.brk++;
+				flag = TTY_BREAK;
+
+				if (sb_uart_handle_break(&mtpt->port))
+					goto ignore_char;
+			} 
+			if (lsr & UART_LSR_PE)
+			{
+				mtpt->port.icount.parity++;
+				flag = TTY_PARITY;
+			}
+			if (lsr & UART_LSR_FE)
+			{
+				mtpt->port.icount.frame++;
+				flag = TTY_FRAME;
+			}
+			if (lsr & UART_LSR_OE)
+			{
+				mtpt->port.icount.overrun++;
+				flag = TTY_OVERRUN;
+			}
+			tty_insert_flip_char(tty, ch, flag);
+		}
+		else
+		{
+			ch = serial_inp(mtpt, UART_RX);
+			tty_insert_flip_char(tty, ch, 0);
+		}
+ignore_char:
+		lsr = serial_inp(mtpt, UART_LSR);
+	} while ((lsr & UART_LSR_DR) && (max_count-- > 0));
+
+	tty_flip_buffer_push(tty);
+}
+
+
+
+
+static _INLINE_ void transmit_chars(struct mp_port *mtpt)
+{
+	struct circ_buf *xmit = &mtpt->port.info->xmit;
+	int count;
+
+	if (mtpt->port.x_char) {
+		serial_outp(mtpt, UART_TX, mtpt->port.x_char);
+		mtpt->port.icount.tx++;
+		mtpt->port.x_char = 0;
+		return;
+	}
+	if (uart_circ_empty(xmit) || uart_tx_stopped(&mtpt->port)) {
+		multi_stop_tx(&mtpt->port);
+		return;
+	}
+
+	count = uart_circ_chars_pending(xmit);
+
+	if(count > mtpt->port.fifosize)
+	{
+		count = mtpt->port.fifosize;
+	}
+
+	printk("[%d] mdmode: %x\n", mtpt->port.line, mtpt->port.mdmode);
+	do {
+#if 0
+		/* check multi-drop mode */
+		if ((mtpt->port.mdmode & (MDMODE_ENABLE | MDMODE_ADDR)) == (MDMODE_ENABLE | MDMODE_ADDR))
+		{
+			printk("send address\n");
+			/* send multi-drop address */
+			serial_out(mtpt, UART_SCR, xmit->buf[xmit->tail]);
+		}
+		else
+#endif
+		{
+			serial_out(mtpt, UART_TX, xmit->buf[xmit->tail]);
+		}
+		xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+		mtpt->port.icount.tx++;
+	} while (--count > 0);
+}
+
+
+
+static _INLINE_ void check_modem_status(struct mp_port *mtpt)
+{
+	int status;
+
+	status = serial_in(mtpt, UART_MSR);
+
+	if ((status & UART_MSR_ANY_DELTA) == 0)
+		return;
+
+	if (status & UART_MSR_TERI)
+		mtpt->port.icount.rng++;
+	if (status & UART_MSR_DDSR)
+		mtpt->port.icount.dsr++;
+	if (status & UART_MSR_DDCD)
+		sb_uart_handle_dcd_change(&mtpt->port, status & UART_MSR_DCD);
+	if (status & UART_MSR_DCTS)
+		sb_uart_handle_cts_change(&mtpt->port, status & UART_MSR_CTS);
+
+	wake_up_interruptible(&mtpt->port.info->delta_msr_wait);
+}
+
+static inline void multi_handle_port(struct mp_port *mtpt)
+{
+	unsigned int status = serial_inp(mtpt, UART_LSR);
+
+	//printk("lsr: %x\n", status);
+
+	if ((status & UART_LSR_DR) || (status & UART_LSR_SPECIAL))
+		receive_chars(mtpt, &status);
+	check_modem_status(mtpt);
+	if (status & UART_LSR_THRE)
+	{
+		if ((mtpt->port.type == PORT_16C105X)
+			|| (mtpt->port.type == PORT_16C105XA))
+			transmit_chars(mtpt);
+		else
+		{
+			if (mtpt->interface >= RS485NE)
+				uart_set_mctrl(&mtpt->port, TIOCM_RTS);
+			
+			transmit_chars(mtpt);
+
+
+			if (mtpt->interface >= RS485NE)
+			{
+				while((status=serial_in(mtpt,UART_LSR) &0x60)!=0x60);
+				uart_clear_mctrl(&mtpt->port, TIOCM_RTS);
+			}
+		}
+	}
+}
+
+
+
+static irqreturn_t multi_interrupt(int irq, void *dev_id)
+{
+	struct irq_info *iinfo = dev_id;
+	struct list_head *lhead, *end = NULL;
+	int pass_counter = 0;
+
+
+	spin_lock(&iinfo->lock);
+
+	lhead = iinfo->head;
+	do {
+		struct mp_port *mtpt;
+		unsigned int iir;
+
+		mtpt = list_entry(lhead, struct mp_port, list);
+		
+		iir = serial_in(mtpt, UART_IIR);
+		printk("intrrupt! port %d, iir 0x%x\n", mtpt->port.line, iir); //wlee
+		if (!(iir & UART_IIR_NO_INT)) 
+		{
+			printk("interrupt handle\n");
+			spin_lock(&mtpt->port.lock);
+			multi_handle_port(mtpt);
+			spin_unlock(&mtpt->port.lock);
+
+			end = NULL;
+		} else if (end == NULL)
+			end = lhead;
+
+		lhead = lhead->next;
+		if (lhead == iinfo->head && pass_counter++ > PASS_LIMIT) 
+		{
+			printk(KERN_ERR "multi: too much work for "
+					"irq%d\n", irq);
+			printk( "multi: too much work for "
+					"irq%d\n", irq);
+			break;
+		}
+	} while (lhead != end);
+
+	spin_unlock(&iinfo->lock);
+
+
+        return IRQ_HANDLED;
+}
+
+static void serial_do_unlink(struct irq_info *i, struct mp_port *mtpt)
+{
+	spin_lock_irq(&i->lock);
+
+	if (!list_empty(i->head)) {
+		if (i->head == &mtpt->list)
+			i->head = i->head->next;
+		list_del(&mtpt->list);
+	} else {
+		i->head = NULL;
+	}
+
+	spin_unlock_irq(&i->lock);
+}
+
+static int serial_link_irq_chain(struct mp_port *mtpt)
+{
+	struct irq_info *i = irq_lists + mtpt->port.irq;
+	int ret, irq_flags = mtpt->port.flags & UPF_SHARE_IRQ ? IRQF_SHARED : 0;
+	spin_lock_irq(&i->lock);
+
+	if (i->head) {
+		list_add(&mtpt->list, i->head);
+		spin_unlock_irq(&i->lock);
+
+		ret = 0;
+	} else {
+		INIT_LIST_HEAD(&mtpt->list);
+		i->head = &mtpt->list;
+		spin_unlock_irq(&i->lock);
+
+		ret = request_irq(mtpt->port.irq, multi_interrupt,
+				irq_flags, "serial", i);
+		if (ret < 0)
+			serial_do_unlink(i, mtpt);
+	}
+
+	return ret;
+}
+
+
+
+
+static void serial_unlink_irq_chain(struct mp_port *mtpt)
+{
+	struct irq_info *i = irq_lists + mtpt->port.irq;
+
+	if (list_empty(i->head))
+	{
+		free_irq(mtpt->port.irq, i);
+	}
+	serial_do_unlink(i, mtpt);
+}
+
+static void multi_timeout(unsigned long data)
+{
+	struct mp_port *mtpt = (struct mp_port *)data;
+
+
+	spin_lock(&mtpt->port.lock);
+	multi_handle_port(mtpt);
+	spin_unlock(&mtpt->port.lock);
+
+	mod_timer(&mtpt->timer, jiffies+1 );
+}
+
+static unsigned int multi_tx_empty(struct sb_uart_port *port)
+{
+	struct mp_port *mtpt = (struct mp_port *)port;
+	unsigned long flags;
+	unsigned int ret;
+
+	spin_lock_irqsave(&mtpt->port.lock, flags);
+	ret = serial_in(mtpt, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
+	spin_unlock_irqrestore(&mtpt->port.lock, flags);
+
+	return ret;
+}
+
+
+static unsigned int multi_get_mctrl(struct sb_uart_port *port)
+{
+	struct mp_port *mtpt = (struct mp_port *)port;
+	unsigned char status;
+	unsigned int ret;
+
+	status = serial_in(mtpt, UART_MSR);
+
+	ret = 0;
+	if (status & UART_MSR_DCD)
+		ret |= TIOCM_CAR;
+	if (status & UART_MSR_RI)
+		ret |= TIOCM_RNG;
+	if (status & UART_MSR_DSR)
+		ret |= TIOCM_DSR;
+	if (status & UART_MSR_CTS)
+		ret |= TIOCM_CTS;
+	return ret;
+}
+
+static void multi_set_mctrl(struct sb_uart_port *port, unsigned int mctrl)
+{
+	struct mp_port *mtpt = (struct mp_port *)port;
+	unsigned char mcr = 0;
+
+	mctrl &= 0xff;
+
+	if (mctrl & TIOCM_RTS)
+		mcr |= UART_MCR_RTS;
+	if (mctrl & TIOCM_DTR)
+		mcr |= UART_MCR_DTR;
+	if (mctrl & TIOCM_OUT1)
+		mcr |= UART_MCR_OUT1;
+	if (mctrl & TIOCM_OUT2)
+		mcr |= UART_MCR_OUT2;
+	if (mctrl & TIOCM_LOOP)
+		mcr |= UART_MCR_LOOP;
+
+
+	serial_out(mtpt, UART_MCR, mcr);
+}
+
+
+static void multi_break_ctl(struct sb_uart_port *port, int break_state)
+{
+	struct mp_port *mtpt = (struct mp_port *)port;
+	unsigned long flags;
+
+	spin_lock_irqsave(&mtpt->port.lock, flags);
+	if (break_state == -1)
+		mtpt->lcr |= UART_LCR_SBC;
+	else
+		mtpt->lcr &= ~UART_LCR_SBC;
+	serial_out(mtpt, UART_LCR, mtpt->lcr);
+	spin_unlock_irqrestore(&mtpt->port.lock, flags);
+}
+
+
+
+static int multi_startup(struct sb_uart_port *port)
+{
+	struct mp_port *mtpt = (struct mp_port *)port;
+	unsigned long flags;
+	int retval;
+
+	mtpt->capabilities = uart_config[mtpt->port.type].flags;
+	mtpt->mcr = 0;
+
+	if (mtpt->capabilities & UART_CLEAR_FIFO) {
+		serial_outp(mtpt, UART_FCR, UART_FCR_ENABLE_FIFO);
+		serial_outp(mtpt, UART_FCR, UART_FCR_ENABLE_FIFO |
+				UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
+		serial_outp(mtpt, UART_FCR, 0);
+	}
+
+	(void) serial_inp(mtpt, UART_LSR);
+	(void) serial_inp(mtpt, UART_RX);
+	(void) serial_inp(mtpt, UART_IIR);
+	(void) serial_inp(mtpt, UART_MSR);
+	//test-wlee 9-bit disable
+	serial_outp(mtpt, UART_MSR, 0);
+
+
+	if (!(mtpt->port.flags & UPF_BUGGY_UART) &&
+			(serial_inp(mtpt, UART_LSR) == 0xff)) {
+		printk("ttyS%d: LSR safety check engaged!\n", mtpt->port.line);
+		//return -ENODEV;
+	}
+
+	if ((!is_real_interrupt(mtpt->port.irq)) || (mtpt->poll_type==TYPE_POLL)) {
+		unsigned int timeout = mtpt->port.timeout;
+
+		timeout = timeout > 6 ? (timeout / 2 - 2) : 1;
+
+		mtpt->timer.data = (unsigned long)mtpt;
+		mod_timer(&mtpt->timer, jiffies + timeout);
+	} 
+	else 
+	{
+		retval = serial_link_irq_chain(mtpt);
+		if (retval)
+			return retval;
+	}
+
+	serial_outp(mtpt, UART_LCR, UART_LCR_WLEN8);
+
+	spin_lock_irqsave(&mtpt->port.lock, flags);
+	if ((is_real_interrupt(mtpt->port.irq))||(mtpt->poll_type==TYPE_INTERRUPT))
+		mtpt->port.mctrl |= TIOCM_OUT2;
+
+	multi_set_mctrl(&mtpt->port, mtpt->port.mctrl);
+	spin_unlock_irqrestore(&mtpt->port.lock, flags);
+
+	
+	mtpt->ier = UART_IER_RLSI | UART_IER_RDI;
+	serial_outp(mtpt, UART_IER, mtpt->ier);
+
+	(void) serial_inp(mtpt, UART_LSR);
+	(void) serial_inp(mtpt, UART_RX);
+	(void) serial_inp(mtpt, UART_IIR);
+	(void) serial_inp(mtpt, UART_MSR);
+
+	return 0;
+}
+
+
+
+static void multi_shutdown(struct sb_uart_port *port)
+{
+	struct mp_port *mtpt = (struct mp_port *)port;
+	unsigned long flags;
+
+
+	mtpt->ier = 0;
+	serial_outp(mtpt, UART_IER, 0);
+
+	spin_lock_irqsave(&mtpt->port.lock, flags);
+	mtpt->port.mctrl &= ~TIOCM_OUT2;
+
+	multi_set_mctrl(&mtpt->port, mtpt->port.mctrl);
+	spin_unlock_irqrestore(&mtpt->port.lock, flags);
+
+	serial_out(mtpt, UART_LCR, serial_inp(mtpt, UART_LCR) & ~UART_LCR_SBC);
+	serial_outp(mtpt, UART_FCR, UART_FCR_ENABLE_FIFO |
+			UART_FCR_CLEAR_RCVR |
+			UART_FCR_CLEAR_XMIT);
+	serial_outp(mtpt, UART_FCR, 0);
+
+
+	(void) serial_in(mtpt, UART_RX);
+
+	if ((!is_real_interrupt(mtpt->port.irq))||(mtpt->poll_type==TYPE_POLL))
+	{
+		del_timer_sync(&mtpt->timer);
+	}
+	else
+	{
+		serial_unlink_irq_chain(mtpt);
+	}
+}
+
+
+
+static unsigned int multi_get_divisor(struct sb_uart_port *port, unsigned int baud)
+{
+	unsigned int quot;
+
+	if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
+			baud == (port->uartclk/4))
+		quot = 0x8001;
+	else if ((port->flags & UPF_MAGIC_MULTIPLIER) &&
+			baud == (port->uartclk/8))
+		quot = 0x8002;
+	else
+		quot = sb_uart_get_divisor(port, baud);
+
+	return quot;
+}
+
+
+
+
+static void multi_set_termios(struct sb_uart_port *port, struct MP_TERMIOS *termios, struct MP_TERMIOS *old)
+{
+	struct mp_port *mtpt = (struct mp_port *)port;
+	unsigned char cval, fcr = 0;
+	unsigned long flags;
+	unsigned int baud, quot;
+
+	switch (termios->c_cflag & CSIZE) {
+		case CS5:
+			cval = 0x00;
+			break;
+		case CS6:
+			cval = 0x01;
+			break;
+		case CS7:
+			cval = 0x02;
+			break;
+		default:
+		case CS8:
+			cval = 0x03;
+			break;
+	}
+
+	if (termios->c_cflag & CSTOPB)
+		cval |= 0x04;
+	if (termios->c_cflag & PARENB)
+		cval |= UART_LCR_PARITY;
+	if (!(termios->c_cflag & PARODD))
+		cval |= UART_LCR_EPAR;
+
+#ifdef CMSPAR
+	if (termios->c_cflag & CMSPAR)
+		cval |= UART_LCR_SPAR;
+#endif
+
+	baud = sb_uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+	quot = multi_get_divisor(port, baud);
+
+	if (mtpt->capabilities & UART_USE_FIFO) {
+		//if (baud < 2400)
+		//	fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
+		//else
+		//	fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_8;
+
+		//	fcr = UART_FCR_ENABLE_FIFO | 0x90;
+			fcr = fcr_arr[mtpt->port.line];
+	}
+
+	spin_lock_irqsave(&mtpt->port.lock, flags);
+
+	sb_uart_update_timeout(port, termios->c_cflag, baud);
+
+	mtpt->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
+	if (termios->c_iflag & INPCK)
+		mtpt->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+	if (termios->c_iflag & (BRKINT | PARMRK))
+		mtpt->port.read_status_mask |= UART_LSR_BI;
+
+	mtpt->port.ignore_status_mask = 0;
+	if (termios->c_iflag & IGNPAR)
+		mtpt->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
+	if (termios->c_iflag & IGNBRK) {
+		mtpt->port.ignore_status_mask |= UART_LSR_BI;
+		if (termios->c_iflag & IGNPAR)
+			mtpt->port.ignore_status_mask |= UART_LSR_OE;
+	}
+
+	if ((termios->c_cflag & CREAD) == 0)
+		mtpt->port.ignore_status_mask |= UART_LSR_DR;
+
+	mtpt->ier &= ~UART_IER_MSI;
+	if (UART_ENABLE_MS(&mtpt->port, termios->c_cflag))
+		mtpt->ier |= UART_IER_MSI;
+
+	serial_out(mtpt, UART_IER, mtpt->ier);
+
+	if (mtpt->capabilities & UART_STARTECH) {
+		serial_outp(mtpt, UART_LCR, 0xBF);
+		serial_outp(mtpt, UART_EFR,
+				termios->c_cflag & CRTSCTS ? UART_EFR_CTS :0);
+	}
+
+	serial_outp(mtpt, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
+
+	serial_outp(mtpt, UART_DLL, quot & 0xff);     /* LS of divisor */
+	serial_outp(mtpt, UART_DLM, quot >> 8);       /* MS of divisor */
+
+	serial_outp(mtpt, UART_LCR, cval);        /* reset DLAB */
+	mtpt->lcr = cval;                 /* Save LCR */
+
+	if (fcr & UART_FCR_ENABLE_FIFO) {
+		/* emulated UARTs (Lucent Venus 167x) need two steps */
+		serial_outp(mtpt, UART_FCR, UART_FCR_ENABLE_FIFO);
+	}
+
+	serial_outp(mtpt, UART_FCR, fcr);     /* set fcr */
+
+
+	if ((mtpt->port.type == PORT_16C105X)
+		|| (mtpt->port.type == PORT_16C105XA))
+	{
+		if(deep[mtpt->port.line]!=0)
+			set_deep_fifo(port, ENABLE);
+
+		if (mtpt->interface != RS232)
+			set_auto_rts(port,mtpt->interface);
+
+	}
+	else
+	{
+		if (mtpt->interface >= RS485NE)
+		{
+			uart_clear_mctrl(&mtpt->port, TIOCM_RTS);
+		}
+	}
+
+	if(mtpt->device->device_id == PCI_DEVICE_ID_MP4M)
+	{
+		SendATCommand(mtpt);
+		printk("SendATCommand\n");
+	}	
+	multi_set_mctrl(&mtpt->port, mtpt->port.mctrl);
+	spin_unlock_irqrestore(&mtpt->port.lock, flags);
+}
+
+static void multi_pm(struct sb_uart_port *port, unsigned int state, unsigned int oldstate)
+{
+	struct mp_port *mtpt = (struct mp_port *)port;
+	if (state) {
+		if (mtpt->capabilities & UART_STARTECH) {
+			serial_outp(mtpt, UART_LCR, 0xBF);
+			serial_outp(mtpt, UART_EFR, UART_EFR_ECB);
+			serial_outp(mtpt, UART_LCR, 0);
+			serial_outp(mtpt, UART_IER, UART_IERX_SLEEP);
+			serial_outp(mtpt, UART_LCR, 0xBF);
+			serial_outp(mtpt, UART_EFR, 0);
+			serial_outp(mtpt, UART_LCR, 0);
+		}
+
+		if (mtpt->pm)
+			mtpt->pm(port, state, oldstate);
+	} 
+	else 
+	{
+		if (mtpt->capabilities & UART_STARTECH) {
+			serial_outp(mtpt, UART_LCR, 0xBF);
+			serial_outp(mtpt, UART_EFR, UART_EFR_ECB);
+			serial_outp(mtpt, UART_LCR, 0);
+			serial_outp(mtpt, UART_IER, 0);
+			serial_outp(mtpt, UART_LCR, 0xBF);
+			serial_outp(mtpt, UART_EFR, 0);
+			serial_outp(mtpt, UART_LCR, 0);
+		}
+
+		if (mtpt->pm)
+			mtpt->pm(port, state, oldstate);
+	}
+}
+
+static void multi_release_std_resource(struct mp_port *mtpt)
+{
+	unsigned int size = 8 << mtpt->port.regshift;
+
+	switch (mtpt->port.iotype) {
+		case UPIO_MEM:
+			if (!mtpt->port.mapbase)
+				break;
+
+			if (mtpt->port.flags & UPF_IOREMAP) {
+				iounmap(mtpt->port.membase);
+				mtpt->port.membase = NULL;
+			}
+
+			release_mem_region(mtpt->port.mapbase, size);
+			break;
+
+		case UPIO_HUB6:
+		case UPIO_PORT:
+			release_region(mtpt->port.iobase,size);
+			break;
+	}
+}
+
+static void multi_release_port(struct sb_uart_port *port)
+{
+}
+
+static int multi_request_port(struct sb_uart_port *port)
+{
+	return 0;
+}
+
+static void multi_config_port(struct sb_uart_port *port, int flags)
+{
+	struct mp_port *mtpt = (struct mp_port *)port;
+	int probeflags = PROBE_ANY;
+
+	if (flags & UART_CONFIG_TYPE)
+		autoconfig(mtpt, probeflags);
+	if (mtpt->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
+		autoconfig_irq(mtpt);
+
+	if (mtpt->port.type == PORT_UNKNOWN)
+		multi_release_std_resource(mtpt);
+}
+
+static int multi_verify_port(struct sb_uart_port *port, struct serial_struct *ser)
+{
+	if (ser->irq >= NR_IRQS || ser->irq < 0 ||
+			ser->baud_base < 9600 || ser->type < PORT_UNKNOWN ||
+			ser->type == PORT_STARTECH)
+		return -EINVAL;
+	return 0;
+}
+
+static const char * multi_type(struct sb_uart_port *port)
+{
+	int type = port->type;
+
+	if (type >= ARRAY_SIZE(uart_config))
+		type = 0;
+	return uart_config[type].name;
+}
+
+static struct sb_uart_ops multi_pops = {
+	.tx_empty   = multi_tx_empty,
+	.set_mctrl  = multi_set_mctrl,
+	.get_mctrl  = multi_get_mctrl,
+	.stop_tx    = multi_stop_tx,
+	.start_tx   = multi_start_tx,
+	.stop_rx    = multi_stop_rx,
+	.enable_ms  = multi_enable_ms,
+	.break_ctl  = multi_break_ctl,
+	.startup    = multi_startup,
+	.shutdown   = multi_shutdown,
+	.set_termios    = multi_set_termios,
+	.pm     	= multi_pm,
+	.type       	= multi_type,
+	.release_port   = multi_release_port,
+	.request_port   = multi_request_port,
+	.config_port    = multi_config_port,
+	.verify_port    = multi_verify_port,
+};
+
+static struct uart_driver multi_reg = {
+	.owner          = THIS_MODULE,
+	.driver_name    = "goldel_tulip",
+	.dev_name       = "ttyMP",
+	.major          = SB_TTY_MP_MAJOR,
+	.minor          = 0,
+	.nr             = MAX_MP_PORT, 
+	.cons           = NULL,
+};
+
+static void __init multi_init_ports(void)
+{
+	struct mp_port *mtpt;
+	static int first = 1;
+	int i,j,k;
+	unsigned char osc;
+	unsigned char b_ret = 0;
+	static struct mp_device_t * sbdev; 
+
+	if (!first)
+		return;
+	first = 0;
+
+	mtpt = multi_ports; 
+
+	for (k=0;k<NR_BOARD;k++)
+	{
+		sbdev = &mp_devs[k];
+
+		for (i = 0; i < sbdev->nr_ports; i++, mtpt++) 
+		{
+			mtpt->device 		= sbdev;
+			mtpt->port.iobase   = sbdev->uart_access_addr + 8*i;
+			mtpt->port.irq      = sbdev->irq;
+			if ( ((sbdev->device_id == PCI_DEVICE_ID_MP4)&&(sbdev->revision==0x91)))
+				mtpt->interface_config_addr = sbdev->option_reg_addr + 0x08 + i;
+			else if (sbdev->revision == 0xc0)
+				mtpt->interface_config_addr = sbdev->option_reg_addr + 0x08 + (i & 0x1);
+			else
+				mtpt->interface_config_addr = sbdev->option_reg_addr + 0x08 + i/8;
+
+			mtpt->option_base_addr = sbdev->option_reg_addr;
+
+			mtpt->poll_type = sbdev->poll_type;
+
+			mtpt->port.uartclk  = BASE_BAUD * 16;
+
+			/* get input clock infomation */
+			osc = inb(sbdev->option_reg_addr + MP_OPTR_DIR0 + i/8) & 0x0F;
+			if (osc==0x0f)
+				osc = 0;
+			for(j=0;j<osc;j++)
+				mtpt->port.uartclk *= 2;
+			mtpt->port.flags    |= STD_COM_FLAGS | UPF_SHARE_IRQ ;
+			mtpt->port.iotype   = UPIO_PORT;
+			mtpt->port.ops      = &multi_pops;
+
+			if (sbdev->revision == 0xc0)
+			{
+				/* for SB16C1053APCI */
+				b_ret = sb1053a_get_interface(mtpt, i);
+			}
+			else
+			{
+				b_ret = read_option_register(mtpt,(MP_OPTR_IIR0 + i/8));
+				printk("IIR_RET = %x\n",b_ret);
+			}
+
+			if(IIR_RS232 == (b_ret & IIR_RS232))
+			{
+				mtpt->interface = RS232;
+			}
+			if(IIR_RS422 == (b_ret & IIR_RS422))
+			{
+				mtpt->interface = RS422PTP;
+			}
+			if(IIR_RS485 == (b_ret & IIR_RS485))
+			{
+				mtpt->interface = RS485NE;
+			}
+		}
+	}
+}
+
+static void __init multi_register_ports(struct uart_driver *drv)
+{
+	int i;
+
+	multi_init_ports();
+
+	for (i = 0; i < NR_PORTS; i++) {
+		struct mp_port *mtpt = &multi_ports[i];
+
+		mtpt->port.line = i;
+		mtpt->port.ops = &multi_pops;
+		init_timer(&mtpt->timer);
+		mtpt->timer.function = multi_timeout;
+		mp_add_one_port(drv, &mtpt->port);
+	}
+}
+
+/**
+ * pci_remap_base - remap BAR value of pci device
+ *
+ * PARAMETERS
+ *  pcidev  - pci_dev structure address
+ *  offset  - BAR offset PCI_BASE_ADDRESS_0 ~ PCI_BASE_ADDRESS_4
+ *  address - address to be changed BAR value
+ *  size	- size of address space 
+ *
+ * RETURNS
+ *  If this function performs successful, it returns 0. Otherwise, It returns -1.
+ */
+static int pci_remap_base(struct pci_dev *pcidev, unsigned int offset, 
+		unsigned int address, unsigned int size) 
+{
+#if 0
+	struct resource *root;
+	unsigned index = (offset - 0x10) >> 2;
+#endif
+
+	pci_write_config_dword(pcidev, offset, address);
+#if 0
+	root = pcidev->resource[index].parent;
+	release_resource(&pcidev->resource[index]);
+	address &= ~0x1;
+	pcidev->resource[index].start = address;
+	pcidev->resource[index].end	  = address + size - 1;
+
+	if (request_resource(root, &pcidev->resource[index]) != NULL)
+	{
+		printk(KERN_ERR "pci remap conflict!! 0x%x\n", address);
+		return (-1);
+	}
+#endif
+
+	return (0);
+}
+
+static int init_mp_dev(struct pci_dev *pcidev, mppcibrd_t brd)
+{
+	static struct mp_device_t * sbdev = mp_devs;
+	unsigned long addr = 0;
+	int j;
+	struct resource * ret = NULL;
+
+	sbdev->device_id = brd.device_id;
+	pci_read_config_byte(pcidev, PCI_CLASS_REVISION, &(sbdev->revision));
+	sbdev->name = brd.name;
+	sbdev->uart_access_addr = pcidev->resource[0].start & PCI_BASE_ADDRESS_IO_MASK;
+
+	/* check revision. The SB16C1053APCI's option i/o address is BAR4 */
+	if (sbdev->revision == 0xc0)
+	{
+		/* SB16C1053APCI */
+		sbdev->option_reg_addr = pcidev->resource[4].start & PCI_BASE_ADDRESS_IO_MASK;
+	}
+	else
+	{
+		sbdev->option_reg_addr = pcidev->resource[1].start & PCI_BASE_ADDRESS_IO_MASK;
+	}
+#if 1	
+	if (sbdev->revision == 0xc0)
+	{
+		outb(0x00, sbdev->option_reg_addr + MP_OPTR_GPOCR);
+		inb(sbdev->option_reg_addr + MP_OPTR_GPOCR);
+		outb(0x83, sbdev->option_reg_addr + MP_OPTR_GPOCR);
+	}
+#endif
+
+	sbdev->irq = pcidev->irq;
+
+	if ((brd.device_id & 0x0800) || !(brd.device_id &0xff00))
+	{
+		sbdev->poll_type = TYPE_INTERRUPT;
+	}
+	else
+	{
+		sbdev->poll_type = TYPE_POLL;
+	}
+
+	/* codes which is specific to each board*/
+	switch(brd.device_id){
+		case PCI_DEVICE_ID_MP1 :
+		case PCIE_DEVICE_ID_MP1 :
+		case PCIE_DEVICE_ID_MP1E :
+		case PCIE_DEVICE_ID_GT_MP1 :
+			sbdev->nr_ports = 1;
+			break;
+		case PCI_DEVICE_ID_MP2 :
+		case PCIE_DEVICE_ID_MP2 :
+		case PCIE_DEVICE_ID_GT_MP2 :
+		case PCIE_DEVICE_ID_MP2B :
+		case PCIE_DEVICE_ID_MP2E :
+			sbdev->nr_ports = 2;
+
+			/* serial base address remap */
+			if (sbdev->revision == 0xc0)
+			{
+				int prev_port_addr = 0;
+
+				pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_0, &prev_port_addr);
+				pci_remap_base(pcidev, PCI_BASE_ADDRESS_1, prev_port_addr + 8, 8);
+			}
+			break;
+		case PCI_DEVICE_ID_MP4 :
+		case PCI_DEVICE_ID_MP4A :
+		case PCIE_DEVICE_ID_MP4 :
+		case PCI_DEVICE_ID_GT_MP4 :
+		case PCI_DEVICE_ID_GT_MP4A :
+		case PCIE_DEVICE_ID_GT_MP4 :
+		case PCI_DEVICE_ID_MP4M :
+		case PCIE_DEVICE_ID_MP4B :
+			sbdev->nr_ports = 4;
+
+			if(sbdev->revision == 0x91){
+				sbdev->reserved_addr[0] = pcidev->resource[0].start & PCI_BASE_ADDRESS_IO_MASK;
+				outb(0x03 , sbdev->reserved_addr[0] + 0x01);
+				outb(0x03 , sbdev->reserved_addr[0] + 0x02);
+				outb(0x01 , sbdev->reserved_addr[0] + 0x20);
+				outb(0x00 , sbdev->reserved_addr[0] + 0x21);
+				request_region(sbdev->reserved_addr[0], 32, sbdev->name);
+				sbdev->uart_access_addr = pcidev->resource[1].start & PCI_BASE_ADDRESS_IO_MASK;
+				sbdev->option_reg_addr = pcidev->resource[2].start & PCI_BASE_ADDRESS_IO_MASK;
+			}
+
+			/* SB16C1053APCI */
+			if (sbdev->revision == 0xc0)
+			{
+				int prev_port_addr = 0;
+
+				pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_0, &prev_port_addr);
+				pci_remap_base(pcidev, PCI_BASE_ADDRESS_1, prev_port_addr + 8, 8);
+				pci_remap_base(pcidev, PCI_BASE_ADDRESS_2, prev_port_addr + 16, 8);
+				pci_remap_base(pcidev, PCI_BASE_ADDRESS_3, prev_port_addr + 24, 8);
+			}
+			break;
+		case PCI_DEVICE_ID_MP6 :
+		case PCI_DEVICE_ID_MP6A :
+		case PCI_DEVICE_ID_GT_MP6 :
+		case PCI_DEVICE_ID_GT_MP6A :
+			sbdev->nr_ports = 6;
+
+			/* SB16C1053APCI */
+			if (sbdev->revision == 0xc0)
+			{
+				int prev_port_addr = 0;
+
+				pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_0, &prev_port_addr);
+				pci_remap_base(pcidev, PCI_BASE_ADDRESS_1, prev_port_addr + 8, 8);
+				pci_remap_base(pcidev, PCI_BASE_ADDRESS_2, prev_port_addr + 16, 16);
+				pci_remap_base(pcidev, PCI_BASE_ADDRESS_3, prev_port_addr + 32, 16);
+			}
+			break;
+		case PCI_DEVICE_ID_MP8 :
+		case PCIE_DEVICE_ID_MP8 :
+		case PCI_DEVICE_ID_GT_MP8 :
+		case PCIE_DEVICE_ID_GT_MP8 :
+		case PCIE_DEVICE_ID_MP8B :
+			sbdev->nr_ports = 8;
+			break;
+		case PCI_DEVICE_ID_MP32 :
+		case PCIE_DEVICE_ID_MP32 :
+		case PCI_DEVICE_ID_GT_MP32 :
+		case PCIE_DEVICE_ID_GT_MP32 :
+			{
+				int portnum_hex=0;
+				portnum_hex = inb(sbdev->option_reg_addr);
+				sbdev->nr_ports = ((portnum_hex/16)*10) + (portnum_hex % 16);
+			}
+			break;
+		case PCI_DEVICE_ID_MP2S1P :
+			sbdev->nr_ports = 2;
+
+			/* SB16C1053APCI */
+			if (sbdev->revision == 0xc0)
+			{
+				int prev_port_addr = 0;
+
+				pci_read_config_dword(pcidev, PCI_BASE_ADDRESS_0, &prev_port_addr);
+				pci_remap_base(pcidev, PCI_BASE_ADDRESS_1, prev_port_addr + 8, 8);
+			}
+
+			/* add PC compatible parallel port */
+			parport_pc_probe_port(pcidev->resource[2].start, pcidev->resource[3].start, PARPORT_IRQ_NONE, PARPORT_DMA_NONE, &pcidev->dev, 0);
+			break;
+		case PCI_DEVICE_ID_MP1P :
+			/* add PC compatible parallel port */
+			parport_pc_probe_port(pcidev->resource[2].start, pcidev->resource[3].start, PARPORT_IRQ_NONE, PARPORT_DMA_NONE, &pcidev->dev, 0);
+			break;
+	}
+
+	ret = request_region(sbdev->uart_access_addr, (8*sbdev->nr_ports), sbdev->name);
+
+	if (sbdev->revision == 0xc0)
+	{
+		ret = request_region(sbdev->option_reg_addr, 0x40, sbdev->name);
+	}
+	else
+	{
+		ret = request_region(sbdev->option_reg_addr, 0x20, sbdev->name);
+	}
+
+
+	NR_BOARD++;
+	NR_PORTS += sbdev->nr_ports;
+
+	/* Enable PCI interrupt */
+	addr = sbdev->option_reg_addr + MP_OPTR_IMR0;
+	for(j=0; j < (sbdev->nr_ports/8)+1; j++)
+	{
+		if (sbdev->poll_type == TYPE_INTERRUPT)
+		{
+			outb(0xff,addr +j);
+		}
+	}
+	sbdev++;
+
+	return 0;
+}
+
+static int __init multi_init(void)
+{
+	int ret, i;
+	struct pci_dev  *dev = NULL;
+
+	if(fcr_count==0)
+	{
+		for(i=0;i<256;i++)
+		{
+			fcr_arr[i] = 0x01;
+			
+		}
+	}
+	if(deep_count==0)
+	{
+		for(i=0;i<256;i++)
+		{
+			deep[i] = 1;
+			
+		}
+	}
+	if(rtr_count==0)
+        {
+                for(i=0;i<256;i++)
+                {
+                        rtr[i] = 0x10;
+                }
+        }
+	if(ttr_count==0)
+        {
+                for(i=0;i<256;i++)
+                {
+                        ttr[i] = 0x38;
+                }
+        }
+
+
+printk("MULTI INIT\n");
+	for( i=0; i< mp_nrpcibrds; i++)
+	{
+
+		while( (dev = pci_get_device(mp_pciboards[i].vendor_id, mp_pciboards[i].device_id, dev) ) )
+
+		{
+printk("FOUND~~~\n");
+//	Cent OS bug fix
+//			if (mp_pciboards[i].device_id & 0x0800)
+			{
+				int status;
+	        		pci_disable_device(dev);
+	        		status = pci_enable_device(dev);
+            
+	   		     	if (status != 0)
+        			{ 
+               				printk("Multiport Board Enable Fail !\n\n");
+               				status = -ENXIO;
+                			return status;
+           			}
+			}
+
+			init_mp_dev(dev, mp_pciboards[i]);	
+		}
+	}
+
+	for (i = 0; i < NR_IRQS; i++)
+		spin_lock_init(&irq_lists[i].lock);
+
+	ret = mp_register_driver(&multi_reg);
+
+	if (ret >= 0)
+		multi_register_ports(&multi_reg);
+
+	return ret;
+}
+
+static void __exit multi_exit(void)
+{
+	int i;
+
+	for (i = 0; i < NR_PORTS; i++)
+		mp_remove_one_port(&multi_reg, &multi_ports[i].port);
+
+	mp_unregister_driver(&multi_reg);
+}
+
+module_init(multi_init);
+module_exit(multi_exit);
+
+MODULE_DESCRIPTION("SystemBase Multiport PCI/PCIe CORE");
+MODULE_LICENSE("GPL");
diff --git a/drivers/staging/sb105x/sb_pci_mp.h b/drivers/staging/sb105x/sb_pci_mp.h
new file mode 100644
index 0000000..f33efde
--- /dev/null
+++ b/drivers/staging/sb105x/sb_pci_mp.h
@@ -0,0 +1,293 @@
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial.h>
+#include <linux/serial_reg.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/wait.h>
+#include <linux/tty_driver.h>
+#include <linux/pci.h>
+#include <linux/circ_buf.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/segment.h>
+#include <asm/serial.h>
+#include <linux/interrupt.h>
+
+
+#include <linux/parport.h>
+#include <linux/ctype.h>
+#include <linux/poll.h>
+
+
+#define MP_TERMIOS  ktermios
+
+#include "sb_mp_register.h"
+#include "sb_ser_core.h"
+
+#define DRIVER_VERSION  "1.1"
+#define DRIVER_DATE     "2012/01/05"
+#define DRIVER_AUTHOR  "SYSTEMBASE<tech@xxxxxxxxxx>"
+#define DRIVER_DESC  "SystemBase PCI/PCIe Multiport Core"
+
+#define SB_TTY_MP_MAJOR			54
+#define PCI_VENDOR_ID_MULTIPORT		0x14A1
+
+#define PCI_DEVICE_ID_MP1		0x4d01
+#define PCI_DEVICE_ID_MP2		0x4d02
+#define PCI_DEVICE_ID_MP4		0x4d04
+#define PCI_DEVICE_ID_MP4A		0x4d54
+#define PCI_DEVICE_ID_MP6		0x4d06
+#define PCI_DEVICE_ID_MP6A		0x4d56
+#define PCI_DEVICE_ID_MP8		0x4d08
+#define PCI_DEVICE_ID_MP32		0x4d32
+/* Parallel port */
+#define PCI_DEVICE_ID_MP1P		0x4301
+#define PCI_DEVICE_ID_MP2S1P		0x4303
+
+#define PCIE_DEVICE_ID_MP1		0x4501
+#define PCIE_DEVICE_ID_MP2		0x4502
+#define PCIE_DEVICE_ID_MP4		0x4504
+#define PCIE_DEVICE_ID_MP8		0x4508
+#define PCIE_DEVICE_ID_MP32		0x4532
+
+#define PCIE_DEVICE_ID_MP1E		0x4e01
+#define PCIE_DEVICE_ID_MP2E		0x4e02
+#define PCIE_DEVICE_ID_MP2B		0x4b02
+#define PCIE_DEVICE_ID_MP4B		0x4b04
+#define PCIE_DEVICE_ID_MP8B		0x4b08
+
+#define PCI_DEVICE_ID_GT_MP4		0x0004
+#define PCI_DEVICE_ID_GT_MP4A		0x0054
+#define PCI_DEVICE_ID_GT_MP6		0x0006
+#define PCI_DEVICE_ID_GT_MP6A		0x0056
+#define PCI_DEVICE_ID_GT_MP8		0x0008
+#define PCI_DEVICE_ID_GT_MP32		0x0032
+
+#define PCIE_DEVICE_ID_GT_MP1		0x1501
+#define PCIE_DEVICE_ID_GT_MP2		0x1502
+#define PCIE_DEVICE_ID_GT_MP4		0x1504
+#define PCIE_DEVICE_ID_GT_MP8		0x1508
+#define PCIE_DEVICE_ID_GT_MP32		0x1532
+
+#define PCI_DEVICE_ID_MP4M		0x4604  //modem
+
+#define MAX_MP_DEV  8
+#define BD_MAX_PORT 32 	/* Max serial port in one board */
+#define MAX_MP_PORT 256 /* Max serial port in one PC */
+
+#define PORT_16C105XA	3
+#define PORT_16C105X	2
+#define PORT_16C55X		1
+
+#define ENABLE		1
+#define DISABLE		0
+
+/* ioctls */
+#define TIOCGNUMOFPORT		0x545F
+#define TIOCSMULTIECHO		0x5440
+#define TIOCSPTPNOECHO		0x5441
+
+#define TIOCGOPTIONREG		0x5461
+#define TIOCGDISABLEIRQ		0x5462
+#define TIOCGENABLEIRQ		0x5463
+#define TIOCGSOFTRESET		0x5464
+#define TIOCGSOFTRESETR		0x5465
+#define TIOCGREGINFO		0x5466
+#define TIOCGGETLSR		0x5467
+#define TIOCGGETDEVID		0x5468
+#define TIOCGGETBDNO		0x5469
+#define TIOCGGETINTERFACE	0x546A
+#define TIOCGGETREV		0x546B
+#define TIOCGGETNRPORTS		0x546C
+#define TIOCGGETPORTTYPE	0x546D
+#define GETDEEPFIFO		0x54AA
+#define SETDEEPFIFO		0x54AB
+#define SETFCR			0x54BA
+#define SETTTR			0x54B1
+#define SETRTR			0x54B2
+#define GETTTR			0x54B3
+#define GETRTR			0x54B4
+
+/* multi-drop mode related ioctl commands */
+#define TIOCSMULTIDROP		0x5470
+#define TIOCSMDADDR   		0x5471
+#define TIOCGMDADDR   		0x5472
+#define TIOCSENDADDR		0x5473
+
+
+/* serial interface */
+#define RS232		1 
+#define RS422PTP	2
+#define RS422MD		3
+#define RS485NE		4
+#define RS485ECHO	5
+
+#define serial_inp(up, offset)      serial_in(up, offset)
+#define serial_outp(up, offset, value)  serial_out(up, offset, value)
+	
+#define PASS_LIMIT  256
+#define is_real_interrupt(irq)  ((irq) != 0)
+
+#define PROBE_ANY   (~0)
+
+static DEFINE_MUTEX(mp_mutex);
+#define MP_MUTEX_LOCK(x) mutex_lock(&(x)) 
+#define MP_MUTEX_UNLOCK(x) mutex_unlock(&(x)) 
+#define MP_STATE_LOCK(x) mutex_lock(&((x)->mutex)) 
+#define MP_STATE_UNLOCK(x) mutex_unlock(&((x)->mutex)) 
+        
+
+#define UART_LSR_SPECIAL    0x1E
+        
+#define HIGH_BITS_OFFSET        ((sizeof(long)-sizeof(int))*8)
+#define uart_users(state)       ((state)->count + ((state)->info ? (state)->info->blocked_open : 0))
+
+
+//#define MP_DEBUG 1
+#undef MP_DEBUG
+
+#ifdef MP_DEBUG
+#define DPRINTK(x...)   printk(x)
+#else
+#define DPRINTK(x...)   do { } while (0)
+#endif
+
+#ifdef MP_DEBUG
+#define DEBUG_AUTOCONF(fmt...)  printk(fmt)
+#else
+#define DEBUG_AUTOCONF(fmt...)  do { } while (0)
+#endif
+
+#ifdef MP_DEBUG
+#define DEBUG_INTR(fmt...)  printk(fmt)
+#else
+#define DEBUG_INTR(fmt...)  do { } while (0)
+#endif
+
+#if defined(__i386__) && (defined(CONFIG_M386) || defined(CONFIG_M486))
+#define SERIAL_INLINE
+#endif
+#ifdef SERIAL_INLINE
+#define _INLINE_ inline
+#else
+#define _INLINE_
+#endif
+
+#define TYPE_POLL	1
+#define TYPE_INTERRUPT	2
+
+
+struct mp_device_t {
+        unsigned short  device_id;
+        unsigned char   revision;
+        char            *name;
+        unsigned long   uart_access_addr;
+        unsigned long   option_reg_addr;
+        unsigned long   reserved_addr[4];
+        int             irq;
+        int             nr_ports;
+        int             poll_type;
+};
+
+typedef struct mppcibrd {
+        char            *name;
+        unsigned short  vendor_id;
+        unsigned short  device_id;
+} mppcibrd_t;
+
+static mppcibrd_t mp_pciboards[] = {
+
+        { "Multi-1 PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP1} ,
+        { "Multi-2 PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP2} ,
+        { "Multi-4 PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP4} ,
+        { "Multi-4 PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP4A} ,
+        { "Multi-6 PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP6} ,
+        { "Multi-6 PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP6A} ,
+        { "Multi-8 PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP8} ,
+        { "Multi-32 PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP32} ,
+
+        { "Multi-1P PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP1P} ,
+        { "Multi-2S1P PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP2S1P} ,
+
+        { "Multi-4(GT) PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_GT_MP4} ,
+        { "Multi-4(GT) PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_GT_MP4A} ,
+        { "Multi-6(GT) PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_GT_MP6} ,
+        { "Multi-6(GT) PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_GT_MP6A} ,
+        { "Multi-8(GT) PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_GT_MP8} ,
+        { "Multi-32(GT) PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_GT_MP32} ,
+
+        { "Multi-1 PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP1} ,
+        { "Multi-2 PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP2} ,
+        { "Multi-4 PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP4} ,
+        { "Multi-8 PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP8} ,
+        { "Multi-32 PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP32} ,
+
+        { "Multi-1 PCIe E", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP1E} ,
+        { "Multi-2 PCIe E", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP2E} ,
+        { "Multi-2 PCIe B", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP2B} ,
+        { "Multi-4 PCIe B", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP4B} ,
+        { "Multi-8 PCIe B", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_MP8B} ,
+
+        { "Multi-1(GT) PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_GT_MP1} ,
+        { "Multi-2(GT) PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_GT_MP2} ,
+        { "Multi-4(GT) PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_GT_MP4} ,
+        { "Multi-8(GT) PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_GT_MP8} ,
+        { "Multi-32(GT) PCIe", PCI_VENDOR_ID_MULTIPORT , PCIE_DEVICE_ID_GT_MP32} ,
+
+        { "Multi-4M PCI", PCI_VENDOR_ID_MULTIPORT , PCI_DEVICE_ID_MP4M} ,
+};
+
+struct mp_port {
+        struct sb_uart_port port;
+
+        struct timer_list   timer;      /* "no irq" timer */
+        struct list_head    list;       /* ports on this IRQ */
+        unsigned int        capabilities;   /* port capabilities */
+        unsigned short      rev;
+        unsigned char       acr;
+        unsigned char       ier;
+        unsigned char       lcr;
+        unsigned char       mcr;
+        unsigned char       mcr_mask;   /* mask of user bits */
+        unsigned char       mcr_force;  /* mask of forced bits */
+        unsigned char       lsr_break_flag;
+
+        void            (*pm)(struct sb_uart_port *port,
+                        unsigned int state, unsigned int old);
+        struct mp_device_t *device;
+        unsigned long   interface_config_addr;
+        unsigned long   option_base_addr;
+        unsigned char   interface;
+        unsigned char   poll_type;
+};
+
+struct irq_info {
+        spinlock_t      lock;
+        struct list_head    *head;
+};
+
+struct sb105x_uart_config {
+	char    *name;
+	int     dfl_xmit_fifo_size;
+	int     flags;
+};
+
+static const struct sb105x_uart_config uart_config[] = {
+        { "unknown",    1,  0 },
+        { "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO },
+        { "SB16C1050",    128,    UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
+        { "SB16C1050A",    128,    UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
+};
+
+
+
diff --git a/drivers/staging/sb105x/sb_ser_core.h b/drivers/staging/sb105x/sb_ser_core.h
new file mode 100644
index 0000000..c8fb991
--- /dev/null
+++ b/drivers/staging/sb105x/sb_ser_core.h
@@ -0,0 +1,368 @@
+#include <linux/wait.h>
+
+#define UART_CONFIG_TYPE	(1 << 0)
+#define UART_CONFIG_IRQ		(1 << 1)
+#define UPIO_PORT		(0)
+#define UPIO_HUB6		(1)
+#define UPIO_MEM		(2)
+#define UPIO_MEM32		(3)
+#define UPIO_AU			(4)			/* Au1x00 type IO */
+#define UPIO_TSI		(5)			/* Tsi108/109 type IO */
+#define UPF_FOURPORT		(1 << 1)
+#define UPF_SAK			(1 << 2)
+#define UPF_SPD_MASK		(0x1030)
+#define UPF_SPD_HI		(0x0010)
+#define UPF_SPD_VHI		(0x0020)
+#define UPF_SPD_CUST		(0x0030)
+#define UPF_SPD_SHI		(0x1000)
+#define UPF_SPD_WARP		(0x1010)
+#define UPF_SKIP_TEST		(1 << 6)
+#define UPF_AUTO_IRQ		(1 << 7)
+#define UPF_HARDPPS_CD		(1 << 11)
+#define UPF_LOW_LATENCY		(1 << 13)
+#define UPF_BUGGY_UART		(1 << 14)
+#define UPF_MAGIC_MULTIPLIER	(1 << 16)
+#define UPF_CONS_FLOW		(1 << 23)
+#define UPF_SHARE_IRQ		(1 << 24)
+#define UPF_BOOT_AUTOCONF	(1 << 28)
+#define UPF_DEAD		(1 << 30)
+#define UPF_IOREMAP		(1 << 31)
+#define UPF_CHANGE_MASK		(0x17fff)
+#define UPF_USR_MASK		(UPF_SPD_MASK|UPF_LOW_LATENCY)
+#define USF_CLOSING_WAIT_INF	(0)
+#define USF_CLOSING_WAIT_NONE	(~0U)
+
+#define UART_XMIT_SIZE	PAGE_SIZE
+
+#define UIF_CHECK_CD		(1 << 25)
+#define UIF_CTS_FLOW		(1 << 26)
+#define UIF_NORMAL_ACTIVE	(1 << 29)
+#define UIF_INITIALIZED		(1 << 31)
+#define UIF_SUSPENDED		(1 << 30)
+
+#define WAKEUP_CHARS		256
+
+#define uart_circ_empty(circ)		((circ)->head == (circ)->tail)
+#define uart_circ_clear(circ)		((circ)->head = (circ)->tail = 0)
+
+#define uart_circ_chars_pending(circ)	\
+	(CIRC_CNT((circ)->head, (circ)->tail, UART_XMIT_SIZE))
+
+#define uart_circ_chars_free(circ)	\
+	(CIRC_SPACE((circ)->head, (circ)->tail, UART_XMIT_SIZE))
+
+#define uart_tx_stopped(port)		\
+	((port)->info->tty->stopped || (port)->info->tty->hw_stopped)
+
+#define UART_ENABLE_MS(port,cflag)	((port)->flags & UPF_HARDPPS_CD || \
+					 (cflag) & CRTSCTS || \
+					 !((cflag) & CLOCAL))
+
+
+struct sb_uart_port;
+struct sb_uart_info;
+struct serial_struct;
+struct device;
+
+struct sb_uart_ops {
+	unsigned int	(*tx_empty)(struct sb_uart_port *);
+	void		(*set_mctrl)(struct sb_uart_port *, unsigned int mctrl);
+	unsigned int	(*get_mctrl)(struct sb_uart_port *);
+	void		(*stop_tx)(struct sb_uart_port *);
+	void		(*start_tx)(struct sb_uart_port *);
+	void		(*send_xchar)(struct sb_uart_port *, char ch);
+	void		(*stop_rx)(struct sb_uart_port *);
+	void		(*enable_ms)(struct sb_uart_port *);
+	void		(*break_ctl)(struct sb_uart_port *, int ctl);
+	int		(*startup)(struct sb_uart_port *);
+	void		(*shutdown)(struct sb_uart_port *);
+	void		(*set_termios)(struct sb_uart_port *, struct MP_TERMIOS *new,
+				       struct MP_TERMIOS *old);
+	void		(*pm)(struct sb_uart_port *, unsigned int state,
+			      unsigned int oldstate);
+	int		(*set_wake)(struct sb_uart_port *, unsigned int state);
+
+	const char *(*type)(struct sb_uart_port *);
+
+	void		(*release_port)(struct sb_uart_port *);
+
+	int		(*request_port)(struct sb_uart_port *);
+	void		(*config_port)(struct sb_uart_port *, int);
+	int		(*verify_port)(struct sb_uart_port *, struct serial_struct *);
+	int		(*ioctl)(struct sb_uart_port *, unsigned int, unsigned long);
+};
+
+
+struct sb_uart_icount {
+	__u32	cts;
+	__u32	dsr;
+	__u32	rng;
+	__u32	dcd;
+	__u32	rx;
+	__u32	tx;
+	__u32	frame;
+	__u32	overrun;
+	__u32	parity;
+	__u32	brk;
+	__u32	buf_overrun;
+};
+typedef unsigned int  upf_t;
+
+struct sb_uart_port {
+	spinlock_t		lock;			/* port lock */
+	unsigned int		iobase;			/* in/out[bwl] */
+	unsigned char __iomem	*membase;		/* read/write[bwl] */
+	unsigned int		irq;			/* irq number */
+	unsigned int		uartclk;		/* base uart clock */
+	unsigned int		fifosize;		/* tx fifo size */
+	unsigned char		x_char;			/* xon/xoff char */
+	unsigned char		regshift;		/* reg offset shift */
+	unsigned char		iotype;			/* io access style */
+	unsigned char		unused1;
+
+
+	unsigned int		read_status_mask;	/* driver specific */
+	unsigned int		ignore_status_mask;	/* driver specific */
+	struct sb_uart_info	*info;			/* pointer to parent info */
+	struct sb_uart_icount	icount;			/* statistics */
+
+	struct console		*cons;			/* struct console, if any */
+#ifdef CONFIG_SERIAL_CORE_CONSOLE
+	unsigned long		sysrq;			/* sysrq timeout */
+#endif
+
+	upf_t			flags;
+
+	unsigned int		mctrl;			/* current modem ctrl settings */
+	unsigned int		timeout;		/* character-based timeout */
+	unsigned int		type;			/* port type */
+	const struct sb_uart_ops	*ops;
+	unsigned int		custom_divisor;
+	unsigned int		line;			/* port index */
+	unsigned long		mapbase;		/* for ioremap */
+	struct device		*dev;			/* parent device */
+	unsigned char		hub6;			/* this should be in the 8250 driver */
+	unsigned char		unused[3];
+};
+
+#define mdmode			unused[2]
+#define MDMODE_ADDR		0x1
+#define MDMODE_ENABLE	0x2
+#define MDMODE_AUTO		0x4
+#define MDMODE_ADDRSEND	0x8
+
+struct sb_uart_state {
+	unsigned int		close_delay;		/* msec */
+	unsigned int		closing_wait;		/* msec */
+
+
+	int			count;
+	int			pm_state;
+	struct sb_uart_info	*info;
+	struct sb_uart_port	*port;
+
+	struct mutex		mutex;
+};
+
+typedef unsigned int  uif_t;
+
+struct sb_uart_info {
+	struct tty_struct	*tty;
+	struct circ_buf		xmit;
+	uif_t			flags;
+
+	int			blocked_open;
+
+	struct tasklet_struct	tlet;
+
+	wait_queue_head_t	open_wait;
+	wait_queue_head_t	delta_msr_wait;
+};
+
+
+struct module;
+struct tty_driver;
+
+struct uart_driver {
+	struct module		*owner;
+	const char		*driver_name;
+	const char		*dev_name;
+	int			 major;
+	int			 minor;
+	int			 nr;
+	struct console		*cons;
+
+	struct sb_uart_state	*state;
+        struct tty_driver               *tty_driver;
+};
+
+void sb_uart_write_wakeup(struct sb_uart_port *port)
+{
+    struct sb_uart_info *info = port->info;
+    tasklet_schedule(&info->tlet);
+}
+
+void sb_uart_update_timeout(struct sb_uart_port *port, unsigned int cflag,
+			 unsigned int baud)
+{
+    unsigned int bits;
+
+    switch (cflag & CSIZE)
+    {
+        case CS5:
+            bits = 7;
+            break;
+
+        case CS6:
+            bits = 8;
+            break;
+
+        case CS7:
+            bits = 9;
+            break;
+
+        default:
+            bits = 10;
+            break;
+    }
+
+    if (cflag & CSTOPB)
+    {
+        bits++;
+    }
+
+    if (cflag & PARENB)
+    {
+        bits++;
+    }
+
+    bits = bits * port->fifosize;
+
+    port->timeout = (HZ * bits) / baud + HZ/50;
+}
+unsigned int sb_uart_get_baud_rate(struct sb_uart_port *port, struct MP_TERMIOS *termios,
+				struct MP_TERMIOS *old, unsigned int min,
+				unsigned int max)
+{
+        unsigned int try, baud, altbaud = 38400;
+        upf_t flags = port->flags & UPF_SPD_MASK;
+
+        if (flags == UPF_SPD_HI)
+                altbaud = 57600;
+        if (flags == UPF_SPD_VHI)
+                altbaud = 115200;
+        if (flags == UPF_SPD_SHI)
+                altbaud = 230400;
+        if (flags == UPF_SPD_WARP)
+                altbaud = 460800;
+
+        for (try = 0; try < 2; try++) {
+
+                switch (termios->c_cflag & (CBAUD | CBAUDEX))
+                {
+                	case B921600    : baud = 921600;    break;
+                	case B460800    : baud = 460800;    break;
+                	case B230400    : baud = 230400;    break;
+                	case B115200    : baud = 115200;    break;
+                	case B57600     : baud = 57600;     break;
+                	case B38400     : baud = 38400;     break;
+                	case B19200     : baud = 19200;     break;
+                	case B9600      : baud = 9600;      break;
+                	case B4800      : baud = 4800;      break;
+                	case B2400      : baud = 2400;      break;
+                	case B1800      : baud = 1800;      break;
+                	case B1200      : baud = 1200;      break;
+                	case B600       : baud = 600;       break;
+                	case B300       : baud = 300;       break;
+                        case B200       : baud = 200;       break;
+                	case B150       : baud = 150;       break;
+                	case B134       : baud = 134;       break;
+                	case B110       : baud = 110;       break;
+                	case B75        : baud = 75;        break;
+                	case B50        : baud = 50;        break;
+                	default         : baud = 9600;      break;
+                }
+
+                if (baud == 38400)
+                        baud = altbaud;
+
+                if (baud == 0)
+                        baud = 9600;
+
+                if (baud >= min && baud <= max)
+                        return baud;
+
+                termios->c_cflag &= ~CBAUD;
+                if (old) {
+                        termios->c_cflag |= old->c_cflag & CBAUD;
+                        old = NULL;
+                        continue;
+                }
+
+                termios->c_cflag |= B9600;
+        }
+
+        return 0;
+}
+unsigned int sb_uart_get_divisor(struct sb_uart_port *port, unsigned int baud)
+{
+        unsigned int quot;
+
+        if (baud == 38400 && (port->flags & UPF_SPD_MASK) == UPF_SPD_CUST)
+                quot = port->custom_divisor;
+        else
+                quot = (port->uartclk + (8 * baud)) / (16 * baud);
+
+        return quot;
+}
+
+
+
+static inline int sb_uart_handle_break(struct sb_uart_port *port)
+{
+	struct sb_uart_info *info = port->info;
+
+	if (port->flags & UPF_SAK)
+		do_SAK(info->tty);
+	return 0;
+}
+
+static inline void sb_uart_handle_dcd_change(struct sb_uart_port *port, unsigned int status)
+{
+	struct sb_uart_info *info = port->info;
+
+	port->icount.dcd++;
+
+	if (info->flags & UIF_CHECK_CD) {
+		if (status)
+			wake_up_interruptible(&info->open_wait);
+		else if (info->tty)
+			tty_hangup(info->tty);
+	}
+}
+
+static inline void sb_uart_handle_cts_change(struct sb_uart_port *port, unsigned int status)
+{
+	struct sb_uart_info *info = port->info;
+	struct tty_struct *tty = info->tty;
+
+	port->icount.cts++;
+
+	if (info->flags & UIF_CTS_FLOW) {
+		if (tty->hw_stopped) {
+			if (status) {
+				tty->hw_stopped = 0;
+				port->ops->start_tx(port);
+				sb_uart_write_wakeup(port);
+			}
+		} else {
+			if (!status) {
+				tty->hw_stopped = 1;
+				port->ops->stop_tx(port);
+			}
+		}
+	}
+}
+
+
+
-- 
1.7.10.4



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/