Re: [PATCH] PCI/PM: Keep runtime PM enabled for unbound PCI devices

[Alan Stern]

On Tue, 20 Nov 2012, Huang Ying wrote:

> For unbound PCI devices, what we need is:
> 
>  - Always in D0 state, because some devices does not work again after
>    being put into D3 by the PCI bus.
> 
>  - In SUSPENDED state if allowed, so that the parent devices can still
>    be put into low power state.
> 
> To satisfy these requirement, the runtime PM for the unbound PCI
> devices are disabled and set to SUSPENDED state.  One issue of this
> solution is that the PCI devices will be put into SUSPENDED state even
> if the SUSPENDED state is forbidden via the sysfs interface
> (.../power/control) of the device.  This is not an issue for most
> devices, because most PCI devices are not used at all if unbounded.
> But there are exceptions.  For example, unbound VGA card can be used
> for display, but suspend its parents make it stop working.
> 
> To fix the issue, we keep the runtime PM enabled when the PCI devices
> are unbound.  But the runtime PM callbacks will do nothing if the PCI
> devices are unbound.  This way, we can put the PCI devices into
> SUSPENDED state without put the PCI devices into D3 state.

Acked-by: Alan Stern <stern@xxxxxxxxxxxxxxxxxxx>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/