Re: [PATCH v4] Thermal: exynos: Add sysfs node supporting exynos'semulation mode.

From: jonghwa3 . lee
Date: Tue Nov 20 2012 - 21:19:11 EST

On 2012ë 11ì 21ì 11:00, Zhang Rui wrote:
> On Thu, 2012-11-08 at 14:54 +0530, Amit Kachhap wrote:
>> Hi Jonghwa Lee,
>>
>> I tested this patch and it looks good. I have some minor comments below,
>>
>> Reviewed-by: Amit Daniel Kachhap <amit.kachhap@xxxxxxxxxx>
>>
> Hi, Lee,
>
> I suppose there should be an updated version being sent out soon, right?
>
> Thanks,
> rui
Hi, Rui,

Yes, there is. I'll re-post it as soon.

Thanks.
>> Thanks,
>> Amit Daniel
>> On 2 November 2012 07:54, Jonghwa Lee <jonghwa3.lee@xxxxxxxxxxx> wrote:
>>> This patch supports exynos's emulation mode with newly created sysfs node.
>>> Exynos 4x12 (4212, 4412) and 5 series provide emulation mode for thermal
>>> management unit. Thermal emulation mode supports software debug for TMU's
>>> operation. User can set temperature manually with software code and TMU
>>> will read current temperature from user value not from sensor's value.
>>> This patch includes also documentary placed under Documentation/thermal/.
>>>
>>> Signed-off-by: Jonghwa Lee <jonghwa3.lee@xxxxxxxxxxx>
>>> ---
>>> v4
>>> - Fix Typo.
>>> - Remove unnecessary codes.
>>> - Add comments about feature of exynos emulation operation to the document.
>>>
>>> v3
>>> - Remove unnecessay variables.
>>> - Do some code clean in exynos_tmu_emulation_store().
>>> - Make wrapping function of sysfs node creation function to use
>>> #ifdefs in minimum.
>>>
>>> v2
>>> exynos_thermal.c
>>> - Fix build error occured by wrong emulation control register name.
>>> - Remove exynos5410 dependent codes.
>>> exynos_thermal_emulation
>>> - Align indentation.
>>>
>>> Documentation/thermal/exynos_thermal_emulation | 56 +++++++++++++++
>>> drivers/thermal/Kconfig | 9 +++
>>> drivers/thermal/exynos_thermal.c | 91 ++++++++++++++++++++++++
>>> 3 files changed, 156 insertions(+), 0 deletions(-)
>>> create mode 100644 Documentation/thermal/exynos_thermal_emulation
>>>
>>> diff --git a/Documentation/thermal/exynos_thermal_emulation b/Documentation/thermal/exynos_thermal_emulation
>>> new file mode 100644
>>> index 0000000..a6ea06f
>>> --- /dev/null
>>> +++ b/Documentation/thermal/exynos_thermal_emulation
>>> @@ -0,0 +1,56 @@
>>> +EXYNOS EMULATION MODE
>>> +========================
>>> +
>>> +Copyright (C) 2012 Samsung Electronics
>>> +
>>> +Written by Jonghwa Lee <jonghwa3.lee@xxxxxxxxxxx>
>>> +
>>> +Description
>>> +-----------
>>> +
>>> +Exynos 4x12 (4212, 4412) and 5 series provide emulation mode for thermal management unit.
>>> +Thermal emulation mode supports software debug for TMU's operation. User can set temperature
>>> +manually with software code and TMU will read current temperature from user value not from
>>> +sensor's value.
>>> +
>>> +Enabling CONFIG_EXYNOS_THERMAL_EMUL option will make this support in available.
>>> +When it's enabled, sysfs node will be created under
>>> +/sys/bus/platform/devices/'exynos device name'/ with name of 'emulation'.
>>> +
>>> +The sysfs node, 'emulation', will contain value 0 for the initial state. When you input any
>>> +temperature you want to update to sysfs node, it automatically enable emulation mode and
>>> +current temperature will be changed into it.
>>> +(Exynos also supports user changable delay time which would be used to delay of
>>> + changing temperature. However, this node only uses same delay of real sensing time, 938us.)
>>> +
>>> +Exynos emulation mode requires synchronous of value changing and enabling. It means when you
>>> +want to update the any value of delay or next temperature, then you have to enable emulation
>>> +mode at the same time. (Or you have to keep the mode enabling.) If you don't, it fails to
>>> +change the value to updated one and just use last succeessful value repeatedly. That's why
>>> +this node gives users the right to change termerpature only. Just one interface makes it more
>>> +simply to use.
>>> +
>>> +Disabling emulation mode only requires writing value 0 to sysfs node.
>>> +
>>> +
>>> +TEMP 120 |
>>> + |
>>> + 100 |
>>> + |
>>> + 80 |
>>> + | +-----------
>>> + 60 | | |
>>> + | +-------------| |
>>> + 40 | | | |
>>> + | | | |
>>> + 20 | | | +----------
>>> + | | | | |
>>> + 0 |______________|_____________|__________|__________|_________
>>> + A A A A TIME
>>> + |<----->| |<----->| |<----->| |
>>> + | 938us | | | | | |
>>> +emulation : 0 50 | 70 | 20 | 0
>>> +current temp : sensor 50 70 20 sensor
>>> +
>>> +
>>> +
>>> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
>>> index e1cb6bd..c02a66c 100644
>>> --- a/drivers/thermal/Kconfig
>>> +++ b/drivers/thermal/Kconfig
>>> @@ -55,3 +55,12 @@ config EXYNOS_THERMAL
>>> help
>>> If you say yes here you get support for TMU (Thermal Managment
>>> Unit) on SAMSUNG EXYNOS series of SoC.
>>> +
>>> +config EXYNOS_THERMAL_EMUL
>>> + bool "EXYNOS TMU emulation mode support"
>>> + depends on !CPU_EXYNOS4210 && EXYNOS_THERMAL
>> Instead of using CPU_EXYNOS4210 here it is better to use data->soc ==
>> SOC_ARCH_EXYNOS4210 inside the emulation show/store functions.
>>> + help
>>> + Exynos 4412 and 4414 and 5 series has emulation mode on TMU.
>>> + Enable this option will be make sysfs node in exynos thermal platform
>>> + device directory to support emulation mode. With emulation mode sysfs
>>> + node, you can manually input temperature to TMU for simulation purpose.
>>> diff --git a/drivers/thermal/exynos_thermal.c b/drivers/thermal/exynos_thermal.c
>>> index fd03e85..eebd4e5 100644
>>> --- a/drivers/thermal/exynos_thermal.c
>>> +++ b/drivers/thermal/exynos_thermal.c
>>> @@ -99,6 +99,14 @@
>>> #define IDLE_INTERVAL 10000
>>> #define MCELSIUS 1000
>>>
>>> +#ifdef CONFIG_EXYNOS_THERMAL_EMUL
>>> +#define EXYNOS_EMUL_TIME 0x57F0
>>> +#define EXYNOS_EMUL_TIME_SHIFT 16
>>> +#define EXYNOS_EMUL_DATA_SHIFT 8
>>> +#define EXYNOS_EMUL_DATA_MASK 0xFF
>>> +#define EXYNOS_EMUL_ENABLE 0x1
>>> +#endif /* CONFIG_EXYNOS_THERMAL_EMUL */
>>> +
>>> /* CPU Zone information */
>>> #define PANIC_ZONE 4
>>> #define WARN_ZONE 3
>>> @@ -832,6 +840,82 @@ static inline struct exynos_tmu_platform_data *exynos_get_driver_data(
>>> return (struct exynos_tmu_platform_data *)
>>> platform_get_device_id(pdev)->driver_data;
>>> }
>>> +
>>> +#ifdef CONFIG_EXYNOS_THERMAL_EMUL
>>> +static ssize_t exynos_tmu_emulation_show(struct device *dev,
>>> + struct device_attribute *attr,
>>> + char *buf)
>>> +{
>>> + struct platform_device *pdev = container_of(dev,
>>> + struct platform_device, dev);
>>> + struct exynos_tmu_data *data = platform_get_drvdata(pdev);
>>> + unsigned int reg;
>>> + u8 temp_code;
>>> + int temp = 0;
>>> +
>>> + mutex_lock(&data->lock);
>>> + clk_enable(data->clk);
>>> + reg = readl(data->base + EXYNOS_EMUL_CON);
>>> + clk_disable(data->clk);
>>> + mutex_unlock(&data->lock);
>>> +
>>> + if (reg & EXYNOS_EMUL_ENABLE) {
>>> + reg >>= EXYNOS_EMUL_DATA_SHIFT;
>>> + temp_code = reg & EXYNOS_EMUL_DATA_MASK;
>>> + temp = code_to_temp(data, temp_code);
>>> + }
>>> +
>>> + return sprintf(buf, "%d\n", temp);
>> Currently in /sys/devices/virtual/thermal/thermal_zone0/ all
>> temperatures are shown in millicelsius so it is better show this in
>> millicelsius also.
>>> +}
>>> +
>>> +static ssize_t exynos_tmu_emulation_store(struct device *dev,
>>> + struct device_attribute *attr,
>>> + const char *buf, size_t count)
>>> +{
>>> + struct platform_device *pdev = container_of(dev,
>>> + struct platform_device, dev);
>>> + struct exynos_tmu_data *data = platform_get_drvdata(pdev);
>>> + unsigned int reg;
>>> + int temp;
>>> +
>>> + if (!sscanf(buf, "%d\n", &temp) || temp < 0)
>>> + return -EINVAL;
>>> +
>>> + mutex_lock(&data->lock);
>>> + clk_enable(data->clk);
>>> +
>>> + reg = readl(data->base + EXYNOS_EMUL_CON);
>>> +
>>> + if (temp)
>>> + reg = (EXYNOS_EMUL_TIME << EXYNOS_EMUL_TIME_SHIFT) |
>>> + (temp_to_code(data, temp) << EXYNOS_EMUL_DATA_SHIFT) |
>> Same as above.
>>> + EXYNOS_EMUL_ENABLE;
>>> + else
>>> + reg &= ~EXYNOS_EMUL_ENABLE;
>>> +
>>> + writel(reg, data->base + EXYNOS_EMUL_CON);
>>> +
>>> + clk_disable(data->clk);
>>> + mutex_unlock(&data->lock);
>>> +
>>> + return count;
>>> +}
>>> +
>>> +static DEVICE_ATTR(emulation, 0644, exynos_tmu_emulation_show,
>>> + exynos_tmu_emulation_store);
>>> +static int create_emulation_sysfs(struct device *dev)
>>> +{
>>> + return device_create_file(dev, &dev_attr_emulation);
>>> +}
>>> +static void remove_emulation_sysfs(struct device *dev)
>>> +{
>>> + device_remove_file(dev, &dev_attr_emulation);
>>> +}
>>> +#else
>>> +static inline int create_emulation_sysfs(struct device *dev) {return 0;}
>>> +static inline void remove_emulation_sysfs(struct device *dev){}
>>> +#endif
>>> +
>>> static int __devinit exynos_tmu_probe(struct platform_device *pdev)
>>> {
>>> struct exynos_tmu_data *data;
>>> @@ -930,6 +1014,11 @@ static int __devinit exynos_tmu_probe(struct platform_device *pdev)
>>> dev_err(&pdev->dev, "Failed to register thermal interface\n");
>>> goto err_clk;
>>> }
>>> +
>>> + ret = create_emulation_sysfs(&pdev->dev);
>>> + if (ret)
>>> + dev_err(&pdev->dev, "Failed to create emulation mode sysfs node\n");
>>> +
>>> return 0;
>>> err_clk:
>>> platform_set_drvdata(pdev, NULL);
>>> @@ -941,6 +1030,8 @@ static int __devexit exynos_tmu_remove(struct platform_device *pdev)
>>> {
>>> struct exynos_tmu_data *data = platform_get_drvdata(pdev);
>>>
>>> + remove_emulation_sysfs(&pdev->dev);
>>> +
>>> exynos_tmu_control(pdev, false);
>>>
>>> exynos_unregister_thermal();
>>> --
>>> 1.7.4.1
>>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-pm" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/