Re: [PATCH v3 1/2] thermal: exynos: Fix wrong bit to control tmu core
From: Amit Kachhap
Date: Wed Nov 21 2012 - 04:46:09 EST
On 20 November 2012 11:23, Zhang Rui <rui.zhang@xxxxxxxxx> wrote:
> On Tue, 2012-11-20 at 10:39 +0900, Kyungmin Park wrote:
>> On 11/20/12, Jonghwan Choi <jhbird.choi@xxxxxxxxxxx> wrote:
>> > [0]bit is used to enable/disable tmu core. [1] bit is a reserved bit.
>> >
>> > Signed-off-by: Jonghwan Choi <jhbird.choi@xxxxxxxxxxx>
>> Acked-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
>
> Amit and Donggeun Kim,
>
> any comments on this patch?
>
> thanks,
> rui
Hi Riu,
This patch is according to the suggestion I made earlier and looks fine.
Acked-by: Amit Daniel Kachhap <amit.daniel@xxxxxxxxxxx>
Thanks,
Amit Daniel
>
>> > ---
>> > drivers/thermal/exynos_thermal.c | 16 ++++++++++++----
>> > 1 files changed, 12 insertions(+), 4 deletions(-)
>> >
>> > diff --git a/drivers/thermal/exynos_thermal.c
>> > b/drivers/thermal/exynos_thermal.c
>> > index 6dd29e4..129e827 100644
>> > --- a/drivers/thermal/exynos_thermal.c
>> > +++ b/drivers/thermal/exynos_thermal.c
>> > @@ -52,9 +52,12 @@
>> >
>> > #define EXYNOS_TMU_TRIM_TEMP_MASK 0xff
>> > #define EXYNOS_TMU_GAIN_SHIFT 8
>> > +#define EXYNOS_TMU_GAIN_MASK (0xF << EXYNOS_TMU_GAIN_SHIFT)
>> > #define EXYNOS_TMU_REF_VOLTAGE_SHIFT 24
>> > -#define EXYNOS_TMU_CORE_ON 3
>> > -#define EXYNOS_TMU_CORE_OFF 2
>> > +#define EXYNOS_TMU_REF_VOLTAGE_MASK (0x1F <<
>> > EXYNOS_TMU_REF_VOLTAGE_SHIFT)
>> > +#define EXYNOS_TMU_CORE_ON BIT(0)
>> > +#define EXYNOS_TMU_CORE_ON_SHIFT 0
>> > +#define EXYNOS_TMU_CORE_ON_MASK (0x1 <<
>> > EXYNOS_TMU_CORE_ON_SHIFT)
>> > #define EXYNOS_TMU_DEF_CODE_TO_TEMP_OFFSET 50
>> >
>> > /* Exynos4210 specific registers */
>> > @@ -85,7 +88,9 @@
>> > #define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 16)
>> > #define EXYNOS_MUX_ADDR_VALUE 6
>> > #define EXYNOS_MUX_ADDR_SHIFT 20
>> > +#define EXYNOS_MUX_ADDR_MASK (0x7 << EXYNOS_MUX_ADDR_SHIFT)
>> > #define EXYNOS_TMU_TRIP_MODE_SHIFT 13
>> > +#define EXYNOS_TMU_TRIP_MODE_MASK (0x7 << EXYNOS_TMU_TRIP_MODE_SHIFT)
>> >
>> > #define EFUSE_MIN_VALUE 40
>> > #define EFUSE_MAX_VALUE 100
>> > @@ -650,10 +655,14 @@ static void exynos_tmu_control(struct platform_device
>> > *pdev, bool on)
>> > mutex_lock(&data->lock);
>> > clk_enable(data->clk);
>> >
>> > - con = pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT |
>> > + con = readl(data->base + EXYNOS_TMU_REG_CONTROL);
>> > + con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK | EXYNOS_TMU_GAIN_MASK |
>> > + EXYNOS_TMU_CORE_ON_MASK);
>> > + con |= pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT |
>> > pdata->gain << EXYNOS_TMU_GAIN_SHIFT;
>> >
>> > if (data->soc == SOC_ARCH_EXYNOS) {
>> > + con &= ~(EXYNOS_TMU_TRIP_MODE_MASK | EXYNOS_MUX_ADDR_MASK);
>> > con |= pdata->noise_cancel_mode <<
>> > EXYNOS_TMU_TRIP_MODE_SHIFT;
>> > con |= (EXYNOS_MUX_ADDR_VALUE << EXYNOS_MUX_ADDR_SHIFT);
>> > }
>> > @@ -665,7 +674,6 @@ static void exynos_tmu_control(struct platform_device
>> > *pdev, bool on)
>> > pdata->trigger_level1_en << 4 |
>> > pdata->trigger_level0_en;
>> > } else {
>> > - con |= EXYNOS_TMU_CORE_OFF;
>> > interrupt_en = 0; /* Disable all interrupts */
>> > }
>> > writel(interrupt_en, data->base + EXYNOS_TMU_REG_INTEN);
>> > --
>> > 1.7.4.1
>> >
>> > --
>> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
>> > the body of a message to majordomo@xxxxxxxxxxxxxxx
>> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>> > Please read the FAQ at http://www.tux.org/lkml/
>> >
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/