Re: [PATCH v2 2/3] ARM/dts: omap3: Add support for IGEPv2 board

[Enric Balletbo Serra]

2012/11/30 Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>:
> ISEE IGEPv2 is an TI OMAP3 SoC based embedded board.
>
> This patch adds an initial device tree support to boot
> an IGEPv2 from the MMC/SD.
>
> Currently is working everything that is supported by DT on OMAP3
> SoCs (MMC/SD, GPIO LEDs, EEPROM, TWL4030 audio and pinctrl based mux).
>
> Signed-off-by: Javier Martinez Canillas <javier.martinez@xxxxxxxxxxxxxxx>
> Acked-by: Matthias Brugger <matthias.bgg@xxxxxxxxx>
> ---
>
> Changes since v1:
>     - Use default-state = "on" instead default-trigger = "default-on" for LED
>
>  arch/arm/boot/dts/Makefile           |    1 +
>  arch/arm/boot/dts/omap3-igep0020.dts |   56 ++++++++++++++++++++++++++++++++++
>  2 files changed, 57 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/boot/dts/omap3-igep0020.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index f37cf9f..1dc0f39 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -66,6 +66,7 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \
>         omap3-beagle-xm.dtb \
>         omap3-evm.dtb \
>         omap3-tobi.dtb \
> +       omap3-igep0020.dtb \
>         omap4-panda.dtb \
>         omap4-pandaES.dtb \
>         omap4-var_som.dtb \
> diff --git a/arch/arm/boot/dts/omap3-igep0020.dts b/arch/arm/boot/dts/omap3-igep0020.dts
> new file mode 100644
> index 0000000..e2b9849
> --- /dev/null
> +++ b/arch/arm/boot/dts/omap3-igep0020.dts
> @@ -0,0 +1,56 @@
> +/*
> + * Device Tree Source for IGEPv2 board
> + *
> + * Copyright (C) 2012 Javier Martinez Canillas <javier@xxxxxxxxxxxxxxx>
> + * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + */
> +
> +/include/ "omap3-igep.dtsi"
> +
> +/ {
> +       model = "IGEPv2";
> +       compatible = "isee,omap3-igep0020", "ti,omap3";
> +
> +       leds {
> +               compatible = "gpio-leds";
> +               boot {
> +                        label = "omap3:green:boot";
> +                        gpios = <&gpio1 26 0>;
> +                        default-state = "on";
> +               };
> +
> +               user0 {
> +                        label = "omap3:red:user0";
> +                        gpios = <&gpio1 27 0>;
> +                        default-state = "off";
> +               };
> +
> +               user1 {
> +                        label = "omap3:red:user1";
> +                        gpios = <&gpio1 28 0>;
> +                        default-state = "off";
> +               };
> +
> +               user2 {
> +                       label = "omap3:green:user1";
> +                       gpios = <&twl_gpio 19 1>;
> +               };
> +       };
> +};
> +
> +&i2c3 {
> +       clock-frequency = <100000>;
> +
> +       /*
> +        * Display monitor features are burnt in the EEPROM
> +        * as EDID data.
> +        */
> +       eeprom@50 {
> +               compatible = "ti,eeprom";
> +               reg = <0x50>;
> +       };
> +};
> --
> 1.7.7.6
>

Tested-by: Enric Balletbo i Serra <eballetbo@xxxxxxxxx>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/