clk_set_parent is expected to fail on OMAP3 platforms. We don't
consider that as fatal so don't spam console.
Signed-off-by: Roger Quadros <rogerq@xxxxxx>
---
drivers/mfd/omap-usb-host.c | 18 +++++++++---------
1 files changed, 9 insertions(+), 9 deletions(-)
diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 0bb54393..344ce09 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -657,32 +657,32 @@ static int __devinit usbhs_omap_probe(struct platform_device *pdev)
}
if (is_ehci_phy_mode(pdata->port_mode[0])) {
- /* for OMAP3 , the clk set paretn fails */
+ /* for OMAP3, clk_set_parent fails */
ret = clk_set_parent(omap->utmi_clk[0],
omap->xclk60mhsp1_ck);
if (ret != 0)
- dev_err(dev, "xclk60mhsp1_ck set parent"
- "failed error:%d\n", ret);
+ dev_dbg(dev, "xclk60mhsp1_ck set parent failed: %d\n",
+ ret);
} else if (is_ehci_tll_mode(pdata->port_mode[0])) {
ret = clk_set_parent(omap->utmi_clk[0],
omap->init_60m_fclk);
if (ret != 0)
- dev_err(dev, "init_60m_fclk set parent"
- "failed error:%d\n", ret);
+ dev_dbg(dev, "P0 init_60m_fclk set parent failed: %d\n",
+ ret);
}
if (is_ehci_phy_mode(pdata->port_mode[1])) {
ret = clk_set_parent(omap->utmi_clk[1],
omap->xclk60mhsp2_ck);
if (ret != 0)
- dev_err(dev, "xclk60mhsp2_ck set parent"
- "failed error:%d\n", ret);
+ dev_dbg(dev, "xclk60mhsp2_ck set parent failed: %d\n",
+ ret);
} else if (is_ehci_tll_mode(pdata->port_mode[1])) {
ret = clk_set_parent(omap->utmi_clk[1],
omap->init_60m_fclk);
if (ret != 0)
- dev_err(dev, "init_60m_fclk set parent"
- "failed error:%d\n", ret);
+ dev_dbg(dev, "P1 init_60m_fclk set parent failed: %d\n",
+ ret);
}
omap_usbhs_init(dev);