[RFC/RFT][PATCH 2/4] regulator: 88pm8607: Use activate_[reg|bit]with regmap based voltage_sel operations

[Axel Lin]

Signed-off-by: Axel Lin <axel.lin@xxxxxxxxxx>
---
 drivers/regulator/88pm8607.c |   43 ++++++++++++------------------------------
 1 file changed, 12 insertions(+), 31 deletions(-)

diff --git a/drivers/regulator/88pm8607.c b/drivers/regulator/88pm8607.c
index 2b55711..21a7334 100644
--- a/drivers/regulator/88pm8607.c
+++ b/drivers/regulator/88pm8607.c
@@ -30,8 +30,6 @@ struct pm8607_regulator_info {
 	unsigned int	*vol_table;
 	unsigned int	*vol_suspend;
 
-	int	update_reg;
-	int	update_bit;
 	int	slope_double;
 };
 
@@ -222,29 +220,6 @@ static int pm8607_list_voltage(struct regulator_dev *rdev, unsigned index)
 	return ret;
 }
 
-static int pm8607_set_voltage_sel(struct regulator_dev *rdev, unsigned selector)
-{
-	struct pm8607_regulator_info *info = rdev_get_drvdata(rdev);
-	uint8_t val;
-	int ret;
-
-	val = (uint8_t)(selector << (ffs(rdev->desc->vsel_mask) - 1));
-
-	ret = pm860x_set_bits(info->i2c, rdev->desc->vsel_reg,
-			      rdev->desc->vsel_mask, val);
-	if (ret)
-		return ret;
-	switch (info->desc.id) {
-	case PM8607_ID_BUCK1:
-	case PM8607_ID_BUCK3:
-		ret = pm860x_set_bits(info->i2c, info->update_reg,
-				      1 << info->update_bit,
-				      1 << info->update_bit);
-		break;
-	}
-	return ret;
-}
-
 static int pm8606_preg_enable(struct regulator_dev *rdev)
 {
 	struct pm8607_regulator_info *info = rdev_get_drvdata(rdev);
@@ -276,7 +251,7 @@ static int pm8606_preg_is_enabled(struct regulator_dev *rdev)
 
 static struct regulator_ops pm8607_regulator_ops = {
 	.list_voltage	= pm8607_list_voltage,
-	.set_voltage_sel = pm8607_set_voltage_sel,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
@@ -313,11 +288,11 @@ static struct regulator_ops pm8606_preg_ops = {
 		.n_voltages = ARRAY_SIZE(vreg##_table),			\
 		.vsel_reg = PM8607_##vreg,				\
 		.vsel_mask = ARRAY_SIZE(vreg##_table) - 1,		\
+		.activate_reg = PM8607_##ureg,				\
+		.activate_bit = (ubit),					\
 		.enable_reg = PM8607_##ereg,				\
 		.enable_mask = 1 << (ebit),				\
 	},								\
-	.update_reg	= PM8607_##ureg,				\
-	.update_bit	= (ubit),					\
 	.slope_double	= (0),						\
 	.vol_table	= (unsigned int *)&vreg##_table,		\
 	.vol_suspend	= (unsigned int *)&vreg##_suspend_table,	\
@@ -343,9 +318,15 @@ static struct regulator_ops pm8606_preg_ops = {
 }
 
 static struct pm8607_regulator_info pm8607_regulator_info[] = {
-	PM8607_DVC(BUCK1, GO, 0, SUPPLIES_EN11, 0),
-	PM8607_DVC(BUCK2, GO, 1, SUPPLIES_EN11, 1),
-	PM8607_DVC(BUCK3, GO, 2, SUPPLIES_EN11, 2),
+	PM8607_DVC(BUCK1, GO, BIT(0), SUPPLIES_EN11, 0),
+	/*
+	 * BUCK2 is designed to control voltage of CP domain.
+	 * Linux only runs in AP side, so we don't need to control BUCK2 in AP
+	 * side. Thus set the activate bit to be 0 instead of BIT(1) to avoid
+	 * updating activate_bit for BUCK2
+	 */
+	PM8607_DVC(BUCK2, GO, 0, SUPPLIES_EN11, 1),
+	PM8607_DVC(BUCK3, GO, BIT(2), SUPPLIES_EN11, 2),
 
 	PM8607_LDO(1,         LDO1, 0, SUPPLIES_EN11, 3),
 	PM8607_LDO(2,         LDO2, 0, SUPPLIES_EN11, 4),
-- 
1.7.9.5



--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/