Re: [PATCH] arm: dts: omap4-sdp: Add I2c pinctrl data

[Sourav]

Hi Luciano,
On Wednesday 30 January 2013 11:55 AM, Luciano Coelho wrote:
> Hi Sourav,
>
> On Mon, 2013-01-28 at 16:47 +0530, Sourav Poddar wrote:
> > Booting 3.8-rc4 om omap 4430sdp results in the following error
> >
> > omap_i2c 48070000.i2c: did not get pins for i2c error: -19
> > [    1.024261] omap_i2c 48070000.i2c: bus 0 rev0.12 at 100 kHz
> > [    1.030181] omap_i2c 48072000.i2c: did not get pins for i2c error: -19
> > [    1.037384] omap_i2c 48072000.i2c: bus 1 rev0.12 at 400 kHz
> > [    1.043762] omap_i2c 48060000.i2c: did not get pins for i2c error: -19
> > [    1.050964] omap_i2c 48060000.i2c: bus 2 rev0.12 at 100 kHz
> > [    1.056823] omap_i2c 4807a000.i2c: did not get pins for i2c error: -19
> > [    1.064025] omap_i2c 4807a000.i2c: bus 3 rev0.12 at 400 kHz
> >
> > This happens because omap4 dts file is not adapted to use i2c through pinctrl
> > framework. Populating i2c pinctrl data to get rid of the error.
> >
> > Tested on omap4430 sdp with 3.8-rc4 kernel.
> >
> > Signed-off-by: Sourav Poddar <sourav.poddar@xxxxxx>
> > Reported-by: Santosh Shilimkar <santosh.shilimkar@xxxxxx>
> > ---
> Could you do the same thing for panda? I'm getting the same kind of
> errors with it:
Sure, I will do that.
> [    0.000000] Machine: Generic OMAP4 (Flattened Device Tree), model: TI OMAP4 PandaBoard
> [...]
> [    2.884826] omap_i2c 48072000.i2c: did not get pins for i2c error: -19
> [    2.890686] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz
> [    2.892028] omap_i2c 48060000.i2c: did not get pins for i2c error: -19
> [    2.899047] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz
> [    2.906677] omap_i2c 48350000.i2c: did not get pins for i2c error: -19
> [    2.912872] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz
>
> --
> Cheers,
> Luca.
Thanks,
Sourav
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/