[PATCH v9 2/2] mmc: card: Adding support for sanitize in eMMC 4.5

From: Yaniv Gardi
Date: Tue Feb 19 2013 - 11:23:36 EST


This feature deletes the unmap memory region of the eMMC card,
by writing to a specific register in the EXT_CSD.
unmap region is the memory region that was previously deleted
(by erase, trim or discard operation).
In order to avoid timeout when sanitizing large-scale cards,
the timeout for sanitize operation is 240 seconds.

Signed-off-by: Yaniv Gardi <ygardi@xxxxxxxxxxxxxx>

---
drivers/mmc/card/block.c | 75 ++++++++++++++++++++++++++++++++-------------
drivers/mmc/card/queue.c | 10 +++++-
include/linux/mmc/host.h | 1 +
3 files changed, 63 insertions(+), 23 deletions(-)

diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index 21056b9..f532489 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -58,6 +58,7 @@ MODULE_ALIAS("mmc:block");
#define INAND_CMD38_ARG_SECTRIM1 0x81
#define INAND_CMD38_ARG_SECTRIM2 0x88
#define MMC_BLK_TIMEOUT_MS (10 * 60 * 1000) /* 10 minute timeout */
+#define MMC_SANITIZE_REQ_TIMEOUT 240000

static DEFINE_MUTEX(block_mutex);

@@ -925,10 +926,10 @@ static int mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq,
{
struct mmc_blk_data *md = mq->data;
struct mmc_card *card = md->queue.card;
- unsigned int from, nr, arg, trim_arg, erase_arg;
+ unsigned int from, nr, arg;
int err = 0, type = MMC_BLK_SECDISCARD;

- if (!(mmc_can_secure_erase_trim(card) || mmc_can_sanitize(card))) {
+ if (!(mmc_can_secure_erase_trim(card))) {
err = -EOPNOTSUPP;
goto out;
}
@@ -936,23 +937,11 @@ static int mmc_blk_issue_secdiscard_rq(struct mmc_queue *mq,
from = blk_rq_pos(req);
nr = blk_rq_sectors(req);

- /* The sanitize operation is supported at v4.5 only */
- if (mmc_can_sanitize(card)) {
- erase_arg = MMC_ERASE_ARG;
- trim_arg = MMC_TRIM_ARG;
- } else {
- erase_arg = MMC_SECURE_ERASE_ARG;
- trim_arg = MMC_SECURE_TRIM1_ARG;
- }
+ if (mmc_can_trim(card) && !mmc_erase_group_aligned(card, from, nr))
+ arg = MMC_SECURE_TRIM1_ARG;
+ else
+ arg = MMC_SECURE_ERASE_ARG;

- if (mmc_erase_group_aligned(card, from, nr))
- arg = erase_arg;
- else if (mmc_can_trim(card))
- arg = trim_arg;
- else {
- err = -EINVAL;
- goto out;
- }
retry:
if (card->quirks & MMC_QUIRK_INAND_CMD38) {
err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
@@ -988,9 +977,6 @@ retry:
goto out;
}

- if (mmc_can_sanitize(card))
- err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
- EXT_CSD_SANITIZE_START, 1, 0);
out_retry:
if (err && !mmc_blk_reset(md, card->host, type))
goto retry;
@@ -1002,6 +988,46 @@ out:
return err ? 0 : 1;
}

+static int mmc_blk_issue_sanitize_rq(struct mmc_queue *mq,
+ struct request *req)
+{
+ struct mmc_blk_data *md = mq->data;
+ struct mmc_card *card = md->queue.card;
+ int err = 0;
+
+ BUG_ON(!card);
+ BUG_ON(!card->host);
+
+ if (!(mmc_can_sanitize(card) &&
+ (card->host->caps2 & MMC_CAP2_SANITIZE))) {
+ pr_warn("%s: %s - SANITIZE is not supported\n",
+ mmc_hostname(card->host), __func__);
+ err = -EOPNOTSUPP;
+ goto out;
+ }
+
+ pr_debug("%s: %s - SANITIZE IN PROGRESS...\n",
+ mmc_hostname(card->host), __func__);
+
+ err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
+ EXT_CSD_SANITIZE_START, 1, MMC_SANITIZE_REQ_TIMEOUT);
+
+ if (err)
+ pr_err("%s: %s - mmc_switch() with SANITIZE failed. err=%d\n",
+ mmc_hostname(card->host), __func__, err);
+
+ pr_debug("%s: %s - SANITIZE COMPLETED\n", mmc_hostname(card->host),
+ __func__);
+
+out:
+ spin_lock_irq(&md->lock);
+ __blk_end_request(req, err, blk_rq_bytes(req));
+ spin_unlock_irq(&md->lock);
+
+ return err ? 0 : 1;
+}
+
+
static int mmc_blk_issue_flush(struct mmc_queue *mq, struct request *req)
{
struct mmc_blk_data *md = mq->data;
@@ -1486,7 +1512,12 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
goto out;
}

- if (req && req->cmd_flags & REQ_DISCARD) {
+ if (req && req->cmd_flags & REQ_SANITIZE) {
+ /* complete ongoing async transfer before issuing sanitize */
+ if (card->host && card->host->areq)
+ mmc_blk_issue_rw_rq(mq, NULL);
+ ret = mmc_blk_issue_sanitize_rq(mq, req);
+ } else if (req && req->cmd_flags & REQ_DISCARD) {
/* complete ongoing async transfer before issuing discard */
if (card->host->areq)
mmc_blk_issue_rw_rq(mq, NULL);
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index fadf52e..32c5bf1 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -148,10 +148,15 @@ static void mmc_queue_setup_discard(struct request_queue *q,
/* granularity must not be greater than max. discard */
if (card->pref_erase > max_discard)
q->limits.discard_granularity = 0;
- if (mmc_can_secure_erase_trim(card) || mmc_can_sanitize(card))
+ if (mmc_can_secure_erase_trim(card))
queue_flag_set_unlocked(QUEUE_FLAG_SECDISCARD, q);
}

+static void mmc_queue_setup_sanitize(struct request_queue *q)
+{
+ queue_flag_set_unlocked(QUEUE_FLAG_SANITIZE, q);
+}
+
/**
* mmc_init_queue - initialise a queue structure.
* @mq: mmc queue
@@ -187,6 +192,9 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card,
if (mmc_can_erase(card))
mmc_queue_setup_discard(mq->queue, card);

+ if ((mmc_can_sanitize(card) && (host->caps2 & MMC_CAP2_SANITIZE)))
+ mmc_queue_setup_sanitize(mq->queue);
+
#ifdef CONFIG_MMC_BLOCK_BOUNCE
if (host->max_segs == 1) {
unsigned int bouncesz;
diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
index 61a10c1..045e9f7 100644
--- a/include/linux/mmc/host.h
+++ b/include/linux/mmc/host.h
@@ -258,6 +258,7 @@ struct mmc_host {
#define MMC_CAP2_HC_ERASE_SZ (1 << 9) /* High-capacity erase size */
#define MMC_CAP2_CD_ACTIVE_HIGH (1 << 10) /* Card-detect signal active high */
#define MMC_CAP2_RO_ACTIVE_HIGH (1 << 11) /* Write-protect signal active high */
+#define MMC_CAP2_SANITIZE (1 << 12) /* Support Sanitize */

mmc_pm_flag_t pm_caps; /* supported pm features */

--
1.7.6
--
Sent by a consultant of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/