[PATCH EDAC 1/6] ghes_edac: remove GHES_PFX macro

[Mauro Carvalho Chehab]

As suggested by Joe:

On Fri, 15 Feb 2013 08:38:17 -0800
Joe Perches <joe@xxxxxxxxxxx> wrote:

	Perhaps these should use
	#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
	and remove GHES_PFX from all the pr_<level>()'s?

Suggested-by: Joe Perches <joe@xxxxxxxxxxx>
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxx>
---
 drivers/edac/ghes_edac.c | 28 +++++++++++++++-------------
 1 file changed, 15 insertions(+), 13 deletions(-)

diff --git a/drivers/edac/ghes_edac.c b/drivers/edac/ghes_edac.c
index 94d5286..565c516 100644
--- a/drivers/edac/ghes_edac.c
+++ b/drivers/edac/ghes_edac.c
@@ -1,14 +1,16 @@
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <acpi/ghes.h>
 #include <linux/edac.h>
 #include <linux/dmi.h>
 #include "edac_core.h"
 
-#define GHES_PFX   "ghes_edac: "
 #define GHES_EDAC_REVISION " Ver: 1.0.0"
 
 static DEFINE_MUTEX(ghes_edac_lock);
 static int ghes_edac_mc_num;
 
+
 /* Memory Device - Type 17 of SMBIOS spec */
 struct memdev_dmi_entry {
 	u8 type;
@@ -80,7 +82,7 @@ static void ghes_edac_dmidecode(const struct dmi_header *dh, void *arg)
 						       dimm_fill->count, 0, 0);
 
 		if (entry->size == 0xffff) {
-			pr_info(GHES_PFX "Can't get DIMM%i size\n",
+			pr_info("Can't get DIMM%i size\n",
 				dimm_fill->count);
 			dimm->nr_pages = MiB_TO_PAGES(32);/* Unknown */
 		} else if (entry->size == 0x7fff) {
@@ -228,7 +230,7 @@ int ghes_edac_register(struct ghes *ghes, struct device *dev)
 	mutex_lock(&ghes_edac_lock);
 	mci = edac_mc_alloc(ghes_edac_mc_num, ARRAY_SIZE(layers), layers, 0);
 	if (!mci) {
-		pr_info(GHES_PFX "Can't allocate memory for EDAC data\n");
+		pr_info("Can't allocate memory for EDAC data\n");
 		mutex_unlock(&ghes_edac_lock);
 		return -ENOMEM;
 	}
@@ -246,17 +248,17 @@ int ghes_edac_register(struct ghes *ghes, struct device *dev)
 
 	if (!ghes_edac_mc_num) {
 		if (!fake) {
-			pr_info(GHES_PFX "This EDAC driver relies on BIOS to enumerate memory and get error reports.\n");
-			pr_info(GHES_PFX "Unfortunately, not all BIOSes reflect the memory layout correctly.\n");
-			pr_info(GHES_PFX "So, the end result of using this driver varies from vendor to vendor.\n");
-			pr_info(GHES_PFX "If you find incorrect reports, please contact your hardware vendor\n");
-			pr_info(GHES_PFX "to correct its BIOS.\n");
-			pr_info(GHES_PFX "This system has %d DIMM sockets.\n",
+			pr_info("This EDAC driver relies on BIOS to enumerate memory and get error reports.\n");
+			pr_info("Unfortunately, not all BIOSes reflect the memory layout correctly.\n");
+			pr_info("So, the end result of using this driver varies from vendor to vendor.\n");
+			pr_info("If you find incorrect reports, please contact your hardware vendor\n");
+			pr_info("to correct its BIOS.\n");
+			pr_info("This system has %d DIMM sockets.\n",
 				num_dimm);
 		} else {
-			pr_info(GHES_PFX "This system has a very crappy BIOS: It doesn't even list the DIMMS.\n");
-			pr_info(GHES_PFX "Its SMBIOS info is wrong. It is doubtful that the error report would\n");
-			pr_info(GHES_PFX "work on such system. Use this driver with caution\n");
+			pr_info("This system has a very crappy BIOS: It doesn't even list the DIMMS.\n");
+			pr_info("Its SMBIOS info is wrong. It is doubtful that the error report would\n");
+			pr_info("work on such system. Use this driver with caution\n");
 		}
 	}
 
@@ -287,7 +289,7 @@ int ghes_edac_register(struct ghes *ghes, struct device *dev)
 
 	rc = edac_mc_add_mc(mci);
 	if (rc < 0) {
-		pr_info(GHES_PFX "Can't register at EDAC core\n");
+		pr_info("Can't register at EDAC core\n");
 		edac_mc_free(mci);
 		mutex_unlock(&ghes_edac_lock);
 		return -ENODEV;
-- 
1.8.1.2

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/