[PATCH 27/40] Input: atmel_mxt_ts - Add check for incorrect firmware file format

[Nick Dyer]

Atmel supplies firmware files in ASCII HEX format (.enc) which must be
converted before they can be loaded by kernel driver. Try to detect the error
and print a friendly error message rather than feeding junk to the bootloader.

Signed-off-by: Nick Dyer <nick.dyer@xxxxxxxxxxx>
---
 drivers/input/touchscreen/atmel_mxt_ts.c |   26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
index 3aac912..a1f196b 100644
--- a/drivers/input/touchscreen/atmel_mxt_ts.c
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -1724,6 +1724,27 @@ done:
 	return error ?: count;
 }
 
+static int mxt_check_firmware_format(struct device *dev, const struct firmware *fw)
+{
+	unsigned int pos = 0;
+	char c;
+
+	while (pos < fw->size) {
+		c = *(fw->data + pos);
+
+		if (c < '0' || (c > '9' && c < 'A') || c > 'F')
+			return 0;
+
+		pos++;
+	}
+
+	/* To convert file try
+	 * xxd -r -p mXTXXX__APP_VX-X-XX.enc > maxtouch.fw */
+	dev_err(dev, "Aborting: firmware file must be in binary format\n");
+
+	return -1;
+}
+
 static int mxt_load_fw(struct device *dev, const char *fn)
 {
 	struct mxt_data *data = dev_get_drvdata(dev);
@@ -1740,6 +1761,11 @@ static int mxt_load_fw(struct device *dev, const char *fn)
 		return ret;
 	}
 
+	/* Check for incorrect enc file */
+	ret = mxt_check_firmware_format(dev, fw);
+	if (ret)
+		goto release_firmware;
+
 	if (data->state != BOOTLOADER) {
 		/* Change to the bootloader mode */
 		ret = mxt_soft_reset(data, MXT_BOOT_VALUE);
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/