[PATCH 2/2] regulators: max8998.c: use dev_err() instead of printk()

[Thiago Farina]

Fixes the following checkpatch warning:

WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(...  to printk(KERN_ERR ...

Signed-off-by: Thiago Farina <tfarina@xxxxxxxxxxxx>
---
 drivers/regulator/max8998.c | 7 ++++---
 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/regulator/max8998.c b/drivers/regulator/max8998.c
index faeb7e8..a57a1b1 100644
--- a/drivers/regulator/max8998.c
+++ b/drivers/regulator/max8998.c
@@ -666,7 +666,7 @@ static int max8998_pmic_probe(struct platform_device *pdev)
 		/* Check if SET1 is not equal to 0 */
 		if (!pdata->buck1_set1) {
 			dev_err(&pdev->dev,
-                                "MAX8998 SET1 GPIO defined as 0 !\n");
+				"MAX8998 SET1 GPIO defined as 0 !\n");
 			WARN_ON(!pdata->buck1_set1);
 			ret = -EIO;
 			goto err_out;
@@ -674,7 +674,7 @@ static int max8998_pmic_probe(struct platform_device *pdev)
 		/* Check if SET2 is not equal to 0 */
 		if (!pdata->buck1_set2) {
 			dev_err(&pdev->dev,
-                                "MAX8998 SET2 GPIO defined as 0 !\n");
+				"MAX8998 SET2 GPIO defined as 0 !\n");
 			WARN_ON(!pdata->buck1_set2);
 			ret = -EIO;
 			goto err_out;
@@ -740,7 +740,8 @@ static int max8998_pmic_probe(struct platform_device *pdev)
 	if (gpio_is_valid(pdata->buck2_set3)) {
 		/* Check if SET3 is not equal to 0 */
 		if (!pdata->buck2_set3) {
-			printk(KERN_ERR "MAX8998 SET3 GPIO defined as 0 !\n");
+			dev_err(&pdev->dev,
+				"MAX8998 SET3 GPIO defined as 0 !\n");
 			WARN_ON(!pdata->buck2_set3);
 			ret = -EIO;
 			goto err_out;
-- 
1.8.1.151.g32238ae

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/