[PATCH 1/4] block: IBM RamSan 70/80 trivial changes.
From: Philip J. Kelleher
Date: Mon Feb 25 2013 - 13:30:14 EST
From: Philip J Kelleher <pjk1939@xxxxxxxxxxxxxxxxxx>
This patch includes trivial changes that were recommended by
different members of the Linux Community.
Signed-off-by: Philip J Kelleher <pjk1939@xxxxxxxxxxxxxxxxxx>
-------------------------------------------------------------------------------
This was built from Jen's for-next branch.
Changes include:
o Removing the redundant wmb().
o Formatting
o Various other little things.
diff -uprN -X linux-block-vanilla/Documentation/dontdiff linux-block-vanilla/drivers/block/rsxx/config.c linux-block/drivers/block/rsxx/config.c
--- linux-block-vanilla/drivers/block/rsxx/config.c 2013-02-25 11:53:40.891299171 -0600
+++ linux-block/drivers/block/rsxx/config.c 2013-02-25 11:57:32.944194401 -0600
@@ -29,10 +29,8 @@
#include "rsxx_priv.h"
#include "rsxx_cfg.h"
-static void initialize_config(void *config)
+static void initialize_config(struct rsxx_card_cfg *cfg)
{
- struct rsxx_card_cfg *cfg = config;
-
cfg->hdr.version = RSXX_CFG_VERSION;
cfg->data.block_size = RSXX_HW_BLK_SIZE;
@@ -181,7 +179,7 @@ int rsxx_load_config(struct rsxx_cardinf
} else {
dev_info(CARD_TO_DEV(card),
"Initializing card configuration.\n");
- initialize_config(card);
+ initialize_config(&card->config);
st = rsxx_save_config(card);
if (st)
return st;
diff -uprN -X linux-block-vanilla/Documentation/dontdiff linux-block-vanilla/drivers/block/rsxx/core.c linux-block/drivers/block/rsxx/core.c
--- linux-block-vanilla/drivers/block/rsxx/core.c 2013-02-25 11:53:40.896495173 -0600
+++ linux-block/drivers/block/rsxx/core.c 2013-02-25 12:05:13.567185446 -0600
@@ -161,9 +161,9 @@ static irqreturn_t rsxx_isr(int irq, voi
}
/*----------------- Card Event Handler -------------------*/
-static char *rsxx_card_state_to_str(unsigned int state)
+static const char * const rsxx_card_state_to_str(unsigned int state)
{
- static char *state_strings[] = {
+ static const char * const state_strings[] = {
"Unknown", "Shutdown", "Starting", "Formatting",
"Uninitialized", "Good", "Shutting Down",
"Fault", "Read Only Fault", "dStroying"
diff -uprN -X linux-block-vanilla/Documentation/dontdiff linux-block-vanilla/drivers/block/rsxx/cregs.c linux-block/drivers/block/rsxx/cregs.c
--- linux-block-vanilla/drivers/block/rsxx/cregs.c 2013-02-25 11:53:40.901473091 -0600
+++ linux-block/drivers/block/rsxx/cregs.c 2013-02-25 11:57:32.958184534 -0600
@@ -126,13 +126,6 @@ static void creg_issue_cmd(struct rsxx_c
cmd->buf, cmd->stream);
}
- /*
- * Data copy must complete before initiating the command. This is
- * needed for weakly ordered processors (i.e. PowerPC), so that all
- * neccessary registers are written before we kick the hardware.
- */
- wmb();
-
/* Setting the valid bit will kick off the command. */
iowrite32(cmd->op, card->regmap + CREG_CMD);
}
@@ -399,12 +392,12 @@ static int __issue_creg_rw(struct rsxx_c
return st;
/*
- * This timeout is neccessary for unresponsive hardware. The additional
+ * This timeout is necessary for unresponsive hardware. The additional
* 20 seconds to used to guarantee that each cregs requests has time to
* complete.
*/
- timeout = msecs_to_jiffies((CREG_TIMEOUT_MSEC *
- card->creg_ctrl.q_depth) + 20000);
+ timeout = msecs_to_jiffies(CREG_TIMEOUT_MSEC *
+ card->creg_ctrl.q_depth + 20000);
/*
* The creg interface is guaranteed to complete. It has a timeout
diff -uprN -X linux-block-vanilla/Documentation/dontdiff linux-block-vanilla/drivers/block/rsxx/dma.c linux-block/drivers/block/rsxx/dma.c
--- linux-block-vanilla/drivers/block/rsxx/dma.c 2013-02-25 11:53:40.906245893 -0600
+++ linux-block/drivers/block/rsxx/dma.c 2013-02-25 11:57:32.964183930 -0600
@@ -432,16 +432,6 @@ static void rsxx_issue_dmas(struct work_
/* Let HW know we've queued commands. */
if (cmds_pending) {
- /*
- * We must guarantee that the CPU writes to 'ctrl->cmd.buf'
- * (which is in PCI-consistent system-memory) from the loop
- * above make it into the coherency domain before the
- * following PIO "trigger" updating the cmd.idx. A WMB is
- * sufficient. We need not explicitly CPU cache-flush since
- * the memory is a PCI-consistent (ie; coherent) mapping.
- */
- wmb();
-
atomic_add(cmds_pending, &ctrl->stats.hw_q_depth);
mod_timer(&ctrl->activity_timer,
jiffies + DMA_ACTIVITY_TIMEOUT);
@@ -798,8 +788,6 @@ static int rsxx_dma_ctrl_init(struct pci
iowrite32(ctrl->cmd.idx, ctrl->regmap + HW_CMD_IDX);
iowrite32(ctrl->cmd.idx, ctrl->regmap + SW_CMD_IDX);
- wmb();
-
return 0;
}
diff -uprN -X linux-block-vanilla/Documentation/dontdiff linux-block-vanilla/drivers/block/rsxx/rsxx.h linux-block/drivers/block/rsxx/rsxx.h
--- linux-block-vanilla/drivers/block/rsxx/rsxx.h 2013-02-25 11:53:40.911245445 -0600
+++ linux-block/drivers/block/rsxx/rsxx.h 2013-02-25 11:57:32.970182625 -0600
@@ -27,15 +27,17 @@
/*----------------- IOCTL Definitions -------------------*/
+#define RSXX_MAX_DATA 8
+
struct rsxx_reg_access {
__u32 addr;
__u32 cnt;
__u32 stat;
__u32 stream;
- __u32 data[8];
+ __u32 data[RSXX_MAX_DATA];
};
-#define RSXX_MAX_REG_CNT (8 * (sizeof(__u32)))
+#define RSXX_MAX_REG_CNT (RSXX_MAX_DATA * (sizeof(__u32)))
#define RSXX_IOC_MAGIC 'r'
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/