[rebased-again-again][PATCH 1/4] acpi: move x86/mm/srat.c to x86/kernel/acpi/srat.c

[liguang]

srat table should present only on acpi domain,
seems mm/ is not the right place for it.

Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@xxxxxxxxxxxxxx>
Signed-off-by: liguang <lig.fnst@xxxxxxxxxxxxxx>
---
 arch/x86/kernel/acpi/Makefile |    1 +
 arch/x86/kernel/acpi/srat.c   |  317 +++++++++++++++++++++++++++++++++++++++++
 arch/x86/mm/Makefile          |    1 -
 arch/x86/mm/srat.c            |  317 -----------------------------------------
 4 files changed, 318 insertions(+), 318 deletions(-)
 create mode 100644 arch/x86/kernel/acpi/srat.c
 delete mode 100644 arch/x86/mm/srat.c

diff --git a/arch/x86/kernel/acpi/Makefile b/arch/x86/kernel/acpi/Makefile
index 163b225..98cea92 100644
--- a/arch/x86/kernel/acpi/Makefile
+++ b/arch/x86/kernel/acpi/Makefile
@@ -1,5 +1,6 @@
 obj-$(CONFIG_ACPI)		+= boot.o
 obj-$(CONFIG_ACPI_SLEEP)	+= sleep.o wakeup_$(BITS).o
+obj-$(CONFIG_ACPI_NUMA)	+= srat.o
 
 ifneq ($(CONFIG_ACPI_PROCESSOR),)
 obj-y				+= cstate.o
diff --git a/arch/x86/kernel/acpi/srat.c b/arch/x86/kernel/acpi/srat.c
new file mode 100644
index 0000000..79836d0
--- /dev/null
+++ b/arch/x86/kernel/acpi/srat.c
@@ -0,0 +1,317 @@
+/*
+ * ACPI 3.0 based NUMA setup
+ * Copyright 2004 Andi Kleen, SuSE Labs.
+ *
+ * Reads the ACPI SRAT table to figure out what memory belongs to which CPUs.
+ *
+ * Called from acpi_numa_init while reading the SRAT and SLIT tables.
+ * Assumes all memory regions belonging to a single proximity domain
+ * are in one chunk. Holes between them will be included in the node.
+ */
+
+#include <linux/kernel.h>
+#include <linux/acpi.h>
+#include <linux/mmzone.h>
+#include <linux/bitmap.h>
+#include <linux/module.h>
+#include <linux/topology.h>
+#include <linux/bootmem.h>
+#include <linux/memblock.h>
+#include <linux/mm.h>
+#include <asm/proto.h>
+#include <asm/numa.h>
+#include <asm/e820.h>
+#include <asm/apic.h>
+#include <asm/uv/uv.h>
+
+int acpi_numa __initdata;
+
+static __init int setup_node(int pxm)
+{
+	return acpi_map_pxm_to_node(pxm);
+}
+
+static __init void bad_srat(void)
+{
+	printk(KERN_ERR "SRAT: SRAT not used.\n");
+	acpi_numa = -1;
+}
+
+static __init inline int srat_disabled(void)
+{
+	return acpi_numa < 0;
+}
+
+/* Callback for SLIT parsing */
+void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
+{
+	int i, j;
+
+	for (i = 0; i < slit->locality_count; i++)
+		for (j = 0; j < slit->locality_count; j++)
+			numa_set_distance(pxm_to_node(i), pxm_to_node(j),
+				slit->entry[slit->locality_count * i + j]);
+}
+
+/* Callback for Proximity Domain -> x2APIC mapping */
+void __init
+acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa)
+{
+	int pxm, node;
+	int apic_id;
+
+	if (srat_disabled())
+		return;
+	if (pa->header.length < sizeof(struct acpi_srat_x2apic_cpu_affinity)) {
+		bad_srat();
+		return;
+	}
+	if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0)
+		return;
+	pxm = pa->proximity_domain;
+	apic_id = pa->apic_id;
+	if (!apic->apic_id_valid(apic_id)) {
+		printk(KERN_INFO "SRAT: PXM %u -> X2APIC 0x%04x ignored\n",
+			 pxm, apic_id);
+		return;
+	}
+	node = setup_node(pxm);
+	if (node < 0) {
+		printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm);
+		bad_srat();
+		return;
+	}
+
+	if (apic_id >= MAX_LOCAL_APIC) {
+		printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node);
+		return;
+	}
+	set_apicid_to_node(apic_id, node);
+	node_set(node, numa_nodes_parsed);
+	acpi_numa = 1;
+	printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u\n",
+	       pxm, apic_id, node);
+}
+
+/* Callback for Proximity Domain -> LAPIC mapping */
+void __init
+acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
+{
+	int pxm, node;
+	int apic_id;
+
+	if (srat_disabled())
+		return;
+	if (pa->header.length != sizeof(struct acpi_srat_cpu_affinity)) {
+		bad_srat();
+		return;
+	}
+	if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0)
+		return;
+	pxm = pa->proximity_domain_lo;
+	if (acpi_srat_revision >= 2)
+		pxm |= *((unsigned int*)pa->proximity_domain_hi) << 8;
+	node = setup_node(pxm);
+	if (node < 0) {
+		printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm);
+		bad_srat();
+		return;
+	}
+
+	if (get_uv_system_type() >= UV_X2APIC)
+		apic_id = (pa->apic_id << 8) | pa->local_sapic_eid;
+	else
+		apic_id = pa->apic_id;
+
+	if (apic_id >= MAX_LOCAL_APIC) {
+		printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node);
+		return;
+	}
+
+	set_apicid_to_node(apic_id, node);
+	node_set(node, numa_nodes_parsed);
+	acpi_numa = 1;
+	printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u\n",
+	       pxm, apic_id, node);
+}
+
+#ifdef CONFIG_MEMORY_HOTPLUG
+static inline int save_add_info(void) {return 1;}
+#else
+static inline int save_add_info(void) {return 0;}
+#endif
+
+#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
+static void __init
+handle_movablemem(int node, u64 start, u64 end, u32 hotpluggable)
+{
+	int overlap, i;
+	unsigned long start_pfn, end_pfn;
+
+	start_pfn = PFN_DOWN(start);
+	end_pfn = PFN_UP(end);
+
+	/*
+	 * For movablemem_map=acpi:
+	 *
+	 * SRAT:		|_____| |_____| |_________| |_________| ......
+	 * node id:                0       1         1           2
+	 * hotpluggable:	   n       y         y           n
+	 * movablemem_map:	        |_____| |_________|
+	 *
+	 * Using movablemem_map, we can prevent memblock from allocating memory
+	 * on ZONE_MOVABLE at boot time.
+	 *
+	 * Before parsing SRAT, memblock has already reserve some memory ranges
+	 * for other purposes, such as for kernel image. We cannot prevent
+	 * kernel from using these memory, so we need to exclude these memory
+	 * even if it is hotpluggable.
+	 * Furthermore, to ensure the kernel has enough memory to boot, we make
+	 * all the memory on the node which the kernel resides in
+	 * un-hotpluggable.
+	 */
+	if (hotpluggable && movablemem_map.acpi) {
+		/* Exclude ranges reserved by memblock. */
+		struct memblock_type *rgn = &memblock.reserved;
+
+		for (i = 0; i < rgn->cnt; i++) {
+			if (end <= rgn->regions[i].base ||
+			    start >= rgn->regions[i].base +
+			    rgn->regions[i].size)
+				continue;
+
+			/*
+			 * If the memory range overlaps the memory reserved by
+			 * memblock, then the kernel resides in this node.
+			 */
+			node_set(node, movablemem_map.numa_nodes_kernel);
+
+			goto out;
+		}
+
+		/*
+		 * If the kernel resides in this node, then the whole node
+		 * should not be hotpluggable.
+		 */
+		if (node_isset(node, movablemem_map.numa_nodes_kernel))
+			goto out;
+
+		insert_movablemem_map(start_pfn, end_pfn);
+
+		/*
+		 * numa_nodes_hotplug nodemask represents which nodes are put
+		 * into movablemem_map.map[].
+		 */
+		node_set(node, movablemem_map.numa_nodes_hotplug);
+		goto out;
+	}
+
+	/*
+	 * For movablemem_map=nn[KMG]@ss[KMG]:
+	 *
+	 * SRAT:		|_____| |_____| |_________| |_________| ......
+	 * node id:		   0       1         1           2
+	 * user specified:	          |__|                 |___|
+	 * movablemem_map:		  |___| |_________|    |______| ......
+	 *
+	 * Using movablemem_map, we can prevent memblock from allocating memory
+	 * on ZONE_MOVABLE at boot time.
+	 *
+	 * NOTE: In this case, SRAT info will be ingored.
+	 */
+	overlap = movablemem_map_overlap(start_pfn, end_pfn);
+	if (overlap >= 0) {
+		/*
+		 * If part of this range is in movablemem_map, we need to
+		 * add the range after it to extend the range to the end
+		 * of the node, because from the min address specified to
+		 * the end of the node will be ZONE_MOVABLE.
+		 */
+		start_pfn = max(start_pfn,
+			    movablemem_map.map[overlap].start_pfn);
+		insert_movablemem_map(start_pfn, end_pfn);
+
+		/*
+		 * Set the nodemask, so that if the address range on one node
+		 * is not continuse, we can add the subsequent ranges on the
+		 * same node into movablemem_map.
+		 */
+		node_set(node, movablemem_map.numa_nodes_hotplug);
+	} else {
+		if (node_isset(node, movablemem_map.numa_nodes_hotplug))
+			/*
+			 * Insert the range if we already have movable ranges
+			 * on the same node.
+			 */
+			insert_movablemem_map(start_pfn, end_pfn);
+	}
+out:
+	return;
+}
+#else		/* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
+static inline void
+handle_movablemem(int node, u64 start, u64 end, u32 hotpluggable)
+{
+}
+#endif		/* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
+
+/* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
+int __init
+acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
+{
+	u64 start, end;
+	u32 hotpluggable;
+	int node, pxm;
+
+	if (srat_disabled())
+		goto out_err;
+	if (ma->header.length != sizeof(struct acpi_srat_mem_affinity))
+		goto out_err_bad_srat;
+	if ((ma->flags & ACPI_SRAT_MEM_ENABLED) == 0)
+		goto out_err;
+	hotpluggable = ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE;
+	if (hotpluggable && !save_add_info())
+		goto out_err;
+
+	start = ma->base_address;
+	end = start + ma->length;
+	pxm = ma->proximity_domain;
+	if (acpi_srat_revision <= 1)
+		pxm &= 0xff;
+
+	node = setup_node(pxm);
+	if (node < 0) {
+		printk(KERN_ERR "SRAT: Too many proximity domains.\n");
+		goto out_err_bad_srat;
+	}
+
+	if (numa_add_memblk(node, start, end) < 0)
+		goto out_err_bad_srat;
+
+	node_set(node, numa_nodes_parsed);
+
+	printk(KERN_INFO "SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx] %s\n",
+	       node, pxm,
+	       (unsigned long long) start, (unsigned long long) end - 1,
+	       hotpluggable ? "Hot Pluggable": "");
+
+	handle_movablemem(node, start, end, hotpluggable);
+
+	return 0;
+out_err_bad_srat:
+	bad_srat();
+out_err:
+	return -1;
+}
+
+void __init acpi_numa_arch_fixup(void) {}
+
+int __init x86_acpi_numa_init(void)
+{
+	int ret;
+
+	ret = acpi_numa_init();
+	if (ret < 0)
+		return ret;
+	return srat_disabled() ? -EINVAL : 0;
+}
diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile
index 23d8e5f..d6f3692 100644
--- a/arch/x86/mm/Makefile
+++ b/arch/x86/mm/Makefile
@@ -24,7 +24,6 @@ obj-$(CONFIG_MMIOTRACE_TEST)	+= testmmiotrace.o
 
 obj-$(CONFIG_NUMA)		+= numa.o numa_$(BITS).o
 obj-$(CONFIG_AMD_NUMA)		+= amdtopology.o
-obj-$(CONFIG_ACPI_NUMA)		+= srat.o
 obj-$(CONFIG_NUMA_EMU)		+= numa_emulation.o
 
 obj-$(CONFIG_MEMTEST)		+= memtest.o
diff --git a/arch/x86/mm/srat.c b/arch/x86/mm/srat.c
deleted file mode 100644
index 79836d0..0000000
--- a/arch/x86/mm/srat.c
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- * ACPI 3.0 based NUMA setup
- * Copyright 2004 Andi Kleen, SuSE Labs.
- *
- * Reads the ACPI SRAT table to figure out what memory belongs to which CPUs.
- *
- * Called from acpi_numa_init while reading the SRAT and SLIT tables.
- * Assumes all memory regions belonging to a single proximity domain
- * are in one chunk. Holes between them will be included in the node.
- */
-
-#include <linux/kernel.h>
-#include <linux/acpi.h>
-#include <linux/mmzone.h>
-#include <linux/bitmap.h>
-#include <linux/module.h>
-#include <linux/topology.h>
-#include <linux/bootmem.h>
-#include <linux/memblock.h>
-#include <linux/mm.h>
-#include <asm/proto.h>
-#include <asm/numa.h>
-#include <asm/e820.h>
-#include <asm/apic.h>
-#include <asm/uv/uv.h>
-
-int acpi_numa __initdata;
-
-static __init int setup_node(int pxm)
-{
-	return acpi_map_pxm_to_node(pxm);
-}
-
-static __init void bad_srat(void)
-{
-	printk(KERN_ERR "SRAT: SRAT not used.\n");
-	acpi_numa = -1;
-}
-
-static __init inline int srat_disabled(void)
-{
-	return acpi_numa < 0;
-}
-
-/* Callback for SLIT parsing */
-void __init acpi_numa_slit_init(struct acpi_table_slit *slit)
-{
-	int i, j;
-
-	for (i = 0; i < slit->locality_count; i++)
-		for (j = 0; j < slit->locality_count; j++)
-			numa_set_distance(pxm_to_node(i), pxm_to_node(j),
-				slit->entry[slit->locality_count * i + j]);
-}
-
-/* Callback for Proximity Domain -> x2APIC mapping */
-void __init
-acpi_numa_x2apic_affinity_init(struct acpi_srat_x2apic_cpu_affinity *pa)
-{
-	int pxm, node;
-	int apic_id;
-
-	if (srat_disabled())
-		return;
-	if (pa->header.length < sizeof(struct acpi_srat_x2apic_cpu_affinity)) {
-		bad_srat();
-		return;
-	}
-	if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0)
-		return;
-	pxm = pa->proximity_domain;
-	apic_id = pa->apic_id;
-	if (!apic->apic_id_valid(apic_id)) {
-		printk(KERN_INFO "SRAT: PXM %u -> X2APIC 0x%04x ignored\n",
-			 pxm, apic_id);
-		return;
-	}
-	node = setup_node(pxm);
-	if (node < 0) {
-		printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm);
-		bad_srat();
-		return;
-	}
-
-	if (apic_id >= MAX_LOCAL_APIC) {
-		printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node);
-		return;
-	}
-	set_apicid_to_node(apic_id, node);
-	node_set(node, numa_nodes_parsed);
-	acpi_numa = 1;
-	printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u\n",
-	       pxm, apic_id, node);
-}
-
-/* Callback for Proximity Domain -> LAPIC mapping */
-void __init
-acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
-{
-	int pxm, node;
-	int apic_id;
-
-	if (srat_disabled())
-		return;
-	if (pa->header.length != sizeof(struct acpi_srat_cpu_affinity)) {
-		bad_srat();
-		return;
-	}
-	if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0)
-		return;
-	pxm = pa->proximity_domain_lo;
-	if (acpi_srat_revision >= 2)
-		pxm |= *((unsigned int*)pa->proximity_domain_hi) << 8;
-	node = setup_node(pxm);
-	if (node < 0) {
-		printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm);
-		bad_srat();
-		return;
-	}
-
-	if (get_uv_system_type() >= UV_X2APIC)
-		apic_id = (pa->apic_id << 8) | pa->local_sapic_eid;
-	else
-		apic_id = pa->apic_id;
-
-	if (apic_id >= MAX_LOCAL_APIC) {
-		printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node);
-		return;
-	}
-
-	set_apicid_to_node(apic_id, node);
-	node_set(node, numa_nodes_parsed);
-	acpi_numa = 1;
-	printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u\n",
-	       pxm, apic_id, node);
-}
-
-#ifdef CONFIG_MEMORY_HOTPLUG
-static inline int save_add_info(void) {return 1;}
-#else
-static inline int save_add_info(void) {return 0;}
-#endif
-
-#ifdef CONFIG_HAVE_MEMBLOCK_NODE_MAP
-static void __init
-handle_movablemem(int node, u64 start, u64 end, u32 hotpluggable)
-{
-	int overlap, i;
-	unsigned long start_pfn, end_pfn;
-
-	start_pfn = PFN_DOWN(start);
-	end_pfn = PFN_UP(end);
-
-	/*
-	 * For movablemem_map=acpi:
-	 *
-	 * SRAT:		|_____| |_____| |_________| |_________| ......
-	 * node id:                0       1         1           2
-	 * hotpluggable:	   n       y         y           n
-	 * movablemem_map:	        |_____| |_________|
-	 *
-	 * Using movablemem_map, we can prevent memblock from allocating memory
-	 * on ZONE_MOVABLE at boot time.
-	 *
-	 * Before parsing SRAT, memblock has already reserve some memory ranges
-	 * for other purposes, such as for kernel image. We cannot prevent
-	 * kernel from using these memory, so we need to exclude these memory
-	 * even if it is hotpluggable.
-	 * Furthermore, to ensure the kernel has enough memory to boot, we make
-	 * all the memory on the node which the kernel resides in
-	 * un-hotpluggable.
-	 */
-	if (hotpluggable && movablemem_map.acpi) {
-		/* Exclude ranges reserved by memblock. */
-		struct memblock_type *rgn = &memblock.reserved;
-
-		for (i = 0; i < rgn->cnt; i++) {
-			if (end <= rgn->regions[i].base ||
-			    start >= rgn->regions[i].base +
-			    rgn->regions[i].size)
-				continue;
-
-			/*
-			 * If the memory range overlaps the memory reserved by
-			 * memblock, then the kernel resides in this node.
-			 */
-			node_set(node, movablemem_map.numa_nodes_kernel);
-
-			goto out;
-		}
-
-		/*
-		 * If the kernel resides in this node, then the whole node
-		 * should not be hotpluggable.
-		 */
-		if (node_isset(node, movablemem_map.numa_nodes_kernel))
-			goto out;
-
-		insert_movablemem_map(start_pfn, end_pfn);
-
-		/*
-		 * numa_nodes_hotplug nodemask represents which nodes are put
-		 * into movablemem_map.map[].
-		 */
-		node_set(node, movablemem_map.numa_nodes_hotplug);
-		goto out;
-	}
-
-	/*
-	 * For movablemem_map=nn[KMG]@ss[KMG]:
-	 *
-	 * SRAT:		|_____| |_____| |_________| |_________| ......
-	 * node id:		   0       1         1           2
-	 * user specified:	          |__|                 |___|
-	 * movablemem_map:		  |___| |_________|    |______| ......
-	 *
-	 * Using movablemem_map, we can prevent memblock from allocating memory
-	 * on ZONE_MOVABLE at boot time.
-	 *
-	 * NOTE: In this case, SRAT info will be ingored.
-	 */
-	overlap = movablemem_map_overlap(start_pfn, end_pfn);
-	if (overlap >= 0) {
-		/*
-		 * If part of this range is in movablemem_map, we need to
-		 * add the range after it to extend the range to the end
-		 * of the node, because from the min address specified to
-		 * the end of the node will be ZONE_MOVABLE.
-		 */
-		start_pfn = max(start_pfn,
-			    movablemem_map.map[overlap].start_pfn);
-		insert_movablemem_map(start_pfn, end_pfn);
-
-		/*
-		 * Set the nodemask, so that if the address range on one node
-		 * is not continuse, we can add the subsequent ranges on the
-		 * same node into movablemem_map.
-		 */
-		node_set(node, movablemem_map.numa_nodes_hotplug);
-	} else {
-		if (node_isset(node, movablemem_map.numa_nodes_hotplug))
-			/*
-			 * Insert the range if we already have movable ranges
-			 * on the same node.
-			 */
-			insert_movablemem_map(start_pfn, end_pfn);
-	}
-out:
-	return;
-}
-#else		/* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
-static inline void
-handle_movablemem(int node, u64 start, u64 end, u32 hotpluggable)
-{
-}
-#endif		/* CONFIG_HAVE_MEMBLOCK_NODE_MAP */
-
-/* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
-int __init
-acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
-{
-	u64 start, end;
-	u32 hotpluggable;
-	int node, pxm;
-
-	if (srat_disabled())
-		goto out_err;
-	if (ma->header.length != sizeof(struct acpi_srat_mem_affinity))
-		goto out_err_bad_srat;
-	if ((ma->flags & ACPI_SRAT_MEM_ENABLED) == 0)
-		goto out_err;
-	hotpluggable = ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE;
-	if (hotpluggable && !save_add_info())
-		goto out_err;
-
-	start = ma->base_address;
-	end = start + ma->length;
-	pxm = ma->proximity_domain;
-	if (acpi_srat_revision <= 1)
-		pxm &= 0xff;
-
-	node = setup_node(pxm);
-	if (node < 0) {
-		printk(KERN_ERR "SRAT: Too many proximity domains.\n");
-		goto out_err_bad_srat;
-	}
-
-	if (numa_add_memblk(node, start, end) < 0)
-		goto out_err_bad_srat;
-
-	node_set(node, numa_nodes_parsed);
-
-	printk(KERN_INFO "SRAT: Node %u PXM %u [mem %#010Lx-%#010Lx] %s\n",
-	       node, pxm,
-	       (unsigned long long) start, (unsigned long long) end - 1,
-	       hotpluggable ? "Hot Pluggable": "");
-
-	handle_movablemem(node, start, end, hotpluggable);
-
-	return 0;
-out_err_bad_srat:
-	bad_srat();
-out_err:
-	return -1;
-}
-
-void __init acpi_numa_arch_fixup(void) {}
-
-int __init x86_acpi_numa_init(void)
-{
-	int ret;
-
-	ret = acpi_numa_init();
-	if (ret < 0)
-		return ret;
-	return srat_disabled() ? -EINVAL : 0;
-}
-- 
1.7.2.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/