Re: crypto: omap-sham, omap-aes anddma_request_slave_channel_compat()

[Vinod Koul]

On Wed, Feb 27, 2013 at 09:36:03PM +0000, Arnd Bergmann wrote:
> On Wednesday 27 February 2013, Vinod Koul wrote:
> > Yes we had agreed that I will send it.
> > 
> > I have applied this one now, and will send second PULL request to Linus soon.
> > 
> > Arnd,
> > The second patch of dw_dmac you wnated to send me fails to apply for me. Can you
> > either rebase or send with your updates with my ack?
> 
> I would prefer if you send the patch. I've rebased my patch on top of
> today's upstream tree but could not see any difference to my previous
> version. Anyway, here it is again.
Thanks, I have applied and pushed it now :)

I will send PULL to linus this evening...

--
~Vinod
> 
> 	Arnd
> 
> 8<----------
> Subject: [PATCH] dmaengine: dw_dmac: move to generic DMA binding
> 
> The original device tree binding for this driver, from Viresh Kumar
> unfortunately conflicted with the generic DMA binding, and did not allow
> to completely seperate slave device configuration from the controller.
> 
> This is an attempt to replace it with an implementation of the generic
> binding, but it is currently completely untested, because I do not have
> any hardware with this particular controller.
> 
> The patch applies on top of the slave-dma tree, which contains both the base
> support for the generic DMA binding, as well as the earlier attempt from
> Viresh. Both of these are currently not merged upstream however.
> 
> This version incorporates feedback from Viresh Kumar, Andy Shevchenko
> and Russell King.
> 
> Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
> Acked-by: Viresh Kumar <viresh.kumar@xxxxxxxxxx>
> Acked-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> Cc: Vinod Koul <vinod.koul@xxxxxxxxxxxxxxx>
> Cc: devicetree-discuss@xxxxxxxxxxxxxxxx
> Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> 
> diff --git a/Documentation/devicetree/bindings/dma/snps-dma.txt b/Documentation/devicetree/bindings/dma/snps-dma.txt
> index 5bb3dfb..d58675e 100644
> --- a/Documentation/devicetree/bindings/dma/snps-dma.txt
> +++ b/Documentation/devicetree/bindings/dma/snps-dma.txt
> @@ -3,59 +3,61 @@
>  Required properties:
>  - compatible: "snps,dma-spear1340"
>  - reg: Address range of the DMAC registers
> -- interrupt-parent: Should be the phandle for the interrupt controller
> -  that services interrupts for this device
>  - interrupt: Should contain the DMAC interrupt number
> -- nr_channels: Number of channels supported by hardware
> -- is_private: The device channels should be marked as private and not for by the
> -  general purpose DMA channel allocator. False if not passed.
> +- dma-channels: Number of channels supported by hardware
> +- dma-requests: Number of DMA request lines supported, up to 16
> +- dma-masters: Number of AHB masters supported by the controller
> +- #dma-cells: must be <3>
>  - chan_allocation_order: order of allocation of channel, 0 (default): ascending,
>    1: descending
>  - chan_priority: priority of channels. 0 (default): increase from chan 0->n, 1:
>    increase from chan n->0
>  - block_size: Maximum block size supported by the controller
> -- nr_masters: Number of AHB masters supported by the controller
>  - data_width: Maximum data width supported by hardware per AHB master
>    (0 - 8bits, 1 - 16bits, ..., 5 - 256bits)
> -- slave_info:
> -	- bus_id: name of this device channel, not just a device name since
> -	  devices may have more than one channel e.g. "foo_tx". For using the
> -	  dw_generic_filter(), slave drivers must pass exactly this string as
> -	  param to filter function.
> -	- cfg_hi: Platform-specific initializer for the CFG_HI register
> -	- cfg_lo: Platform-specific initializer for the CFG_LO register
> -	- src_master: src master for transfers on allocated channel.
> -	- dst_master: dest master for transfers on allocated channel.
> +
> +
> +Optional properties:
> +- interrupt-parent: Should be the phandle for the interrupt controller
> +  that services interrupts for this device
> +- is_private: The device channels should be marked as private and not for by the
> +  general purpose DMA channel allocator. False if not passed.
>  
>  Example:
>  
> -	dma@fc000000 {
> +	dmahost: dma@fc000000 {
>  		compatible = "snps,dma-spear1340";
>  		reg = <0xfc000000 0x1000>;
>  		interrupt-parent = <&vic1>;
>  		interrupts = <12>;
>  
> -		nr_channels = <8>;
> +		dma-channels = <8>;
> +		dma-requests = <16>;
> +		dma-masters = <2>;
> +		#dma-cells = <3>;
>  		chan_allocation_order = <1>;
>  		chan_priority = <1>;
>  		block_size = <0xfff>;
> -		nr_masters = <2>;
>  		data_width = <3 3 0 0>;
> +	};
>  
> -		slave_info {
> -			uart0-tx {
> -				bus_id = "uart0-tx";
> -				cfg_hi = <0x4000>;	/* 0x8 << 11 */
> -				cfg_lo = <0>;
> -				src_master = <0>;
> -				dst_master = <1>;
> -			};
> -			spi0-tx {
> -				bus_id = "spi0-tx";
> -				cfg_hi = <0x2000>;	/* 0x4 << 11 */
> -				cfg_lo = <0>;
> -				src_master = <0>;
> -				dst_master = <0>;
> -			};
> -		};
> +DMA clients connected to the Designware DMA controller must use the format
> +described in the dma.txt file, using a four-cell specifier for each channel.
> +The four cells in order are:
> +
> +1. A phandle pointing to the DMA controller
> +2. The DMA request line number
> +3. Source master for transfers on allocated channel
> +4. Destination master for transfers on allocated channel
> +
> +Example:
> +	
> +	serial@e0000000 {
> +		compatible = "arm,pl011", "arm,primecell";
> +		reg = <0xe0000000 0x1000>;
> +		interrupts = <0 35 0x4>;
> +		status = "disabled";
> +		dmas = <&dmahost 12 0 1>,
> +			<&dmahost 13 0 1 0>;
> +		dma-names = "rx", "rx";
>  	};
> diff --git a/drivers/dma/dw_dmac.c b/drivers/dma/dw_dmac.c
> index 51c3ea2..c599558 100644
> --- a/drivers/dma/dw_dmac.c
> +++ b/drivers/dma/dw_dmac.c
> @@ -20,6 +20,7 @@
>  #include <linux/interrupt.h>
>  #include <linux/io.h>
>  #include <linux/of.h>
> +#include <linux/of_dma.h>
>  #include <linux/mm.h>
>  #include <linux/module.h>
>  #include <linux/platform_device.h>
> @@ -171,7 +172,13 @@ static void dwc_initialize(struct dw_dma_chan *dwc)
>  	if (dwc->initialized == true)
>  		return;
>  
> -	if (dws) {
> +	if (dws && dws->cfg_hi == ~0 && dws->cfg_lo == ~0) {
> +		/* autoconfigure based on request line from DT */
> +		if (dwc->direction == DMA_MEM_TO_DEV)
> +			cfghi = DWC_CFGH_DST_PER(dwc->request_line);
> +		else if (dwc->direction == DMA_DEV_TO_MEM)
> +			cfghi = DWC_CFGH_SRC_PER(dwc->request_line);
> +	} else if (dws) {
>  		/*
>  		 * We need controller-specific data to set up slave
>  		 * transfers.
> @@ -1226,49 +1233,64 @@ static void dwc_free_chan_resources(struct dma_chan *chan)
>  	dev_vdbg(chan2dev(chan), "%s: done\n", __func__);
>  }
>  
> -bool dw_dma_generic_filter(struct dma_chan *chan, void *param)
> +struct dw_dma_filter_args {
> +	struct dw_dma *dw;
> +	unsigned int req;
> +	unsigned int src;
> +	unsigned int dst;
> +};
> +
> +static bool dw_dma_generic_filter(struct dma_chan *chan, void *param)
>  {
> +	struct dw_dma_chan *dwc = to_dw_dma_chan(chan);
>  	struct dw_dma *dw = to_dw_dma(chan->device);
> -	static struct dw_dma *last_dw;
> -	static char *last_bus_id;
> -	int i = -1;
> +	struct dw_dma_filter_args *fargs = param;
> +	struct dw_dma_slave *dws = &dwc->slave;
>  
> -	/*
> -	 * dmaengine framework calls this routine for all channels of all dma
> -	 * controller, until true is returned. If 'param' bus_id is not
> -	 * registered with a dma controller (dw), then there is no need of
> -	 * running below function for all channels of dw.
> -	 *
> -	 * This block of code does this by saving the parameters of last
> -	 * failure. If dw and param are same, i.e. trying on same dw with
> -	 * different channel, return false.
> -	 */
> -	if ((last_dw == dw) && (last_bus_id == param))
> -		return false;
> -	/*
> -	 * Return true:
> -	 * - If dw_dma's platform data is not filled with slave info, then all
> -	 *   dma controllers are fine for transfer.
> -	 * - Or if param is NULL
> -	 */
> -	if (!dw->sd || !param)
> -		return true;
> +	/* ensure the device matches our channel */
> +        if (chan->device != &fargs->dw->dma)
> +                return false;
>  
> -	while (++i < dw->sd_count) {
> -		if (!strcmp(dw->sd[i].bus_id, param)) {
> -			chan->private = &dw->sd[i];
> -			last_dw = NULL;
> -			last_bus_id = NULL;
> +	dws->dma_dev	= dw->dma.dev;
> +	dws->cfg_hi	= ~0;
> +	dws->cfg_lo	= ~0;
> +	dws->src_master	= fargs->src;
> +	dws->dst_master	= fargs->dst;
>  
> -			return true;
> -		}
> -	}
> +	dwc->request_line = fargs->req;
>  
> -	last_dw = dw;
> -	last_bus_id = param;
> -	return false;
> +	chan->private = dws;
> +
> +	return true;
> +}
> +
> +static struct dma_chan *dw_dma_xlate(struct of_phandle_args *dma_spec,
> +					 struct of_dma *ofdma)
> +{
> +	struct dw_dma *dw = ofdma->of_dma_data;
> +	struct dw_dma_filter_args fargs = {
> +		.dw = dw,
> +	};
> +	dma_cap_mask_t cap;
> +
> +	if (dma_spec->args_count != 3)
> +		return NULL;
> +
> +	fargs.req = be32_to_cpup(dma_spec->args+0);
> +	fargs.src = be32_to_cpup(dma_spec->args+1);
> +	fargs.dst = be32_to_cpup(dma_spec->args+2);
> +
> +	if (WARN_ON(fargs.req >= DW_DMA_MAX_NR_REQUESTS ||
> +		    fargs.src >= dw->nr_masters ||
> +		    fargs.dst >= dw->nr_masters))
> +		return NULL;
> +
> +	dma_cap_zero(cap);
> +	dma_cap_set(DMA_SLAVE, cap);
> +
> +	/* TODO: there should be a simpler way to do this */
> +	return dma_request_channel(cap, dw_dma_generic_filter, &fargs);
>  }
> -EXPORT_SYMBOL(dw_dma_generic_filter);
>  
>  /* --------------------- Cyclic DMA API extensions -------------------- */
>  
> @@ -1554,9 +1576,8 @@ static void dw_dma_off(struct dw_dma *dw)
>  static struct dw_dma_platform_data *
>  dw_dma_parse_dt(struct platform_device *pdev)
>  {
> -	struct device_node *sn, *cn, *np = pdev->dev.of_node;
> +	struct device_node *np = pdev->dev.of_node;
>  	struct dw_dma_platform_data *pdata;
> -	struct dw_dma_slave *sd;
>  	u32 tmp, arr[4];
>  
>  	if (!np) {
> @@ -1568,7 +1589,7 @@ dw_dma_parse_dt(struct platform_device *pdev)
>  	if (!pdata)
>  		return NULL;
>  
> -	if (of_property_read_u32(np, "nr_channels", &pdata->nr_channels))
> +	if (of_property_read_u32(np, "dma-channels", &pdata->nr_channels))
>  		return NULL;
>  
>  	if (of_property_read_bool(np, "is_private"))
> @@ -1583,7 +1604,7 @@ dw_dma_parse_dt(struct platform_device *pdev)
>  	if (!of_property_read_u32(np, "block_size", &tmp))
>  		pdata->block_size = tmp;
>  
> -	if (!of_property_read_u32(np, "nr_masters", &tmp)) {
> +	if (!of_property_read_u32(np, "dma-masters", &tmp)) {
>  		if (tmp > 4)
>  			return NULL;
>  
> @@ -1595,36 +1616,6 @@ dw_dma_parse_dt(struct platform_device *pdev)
>  		for (tmp = 0; tmp < pdata->nr_masters; tmp++)
>  			pdata->data_width[tmp] = arr[tmp];
>  
> -	/* parse slave data */
> -	sn = of_find_node_by_name(np, "slave_info");
> -	if (!sn)
> -		return pdata;
> -
> -	/* calculate number of slaves */
> -	tmp = of_get_child_count(sn);
> -	if (!tmp)
> -		return NULL;
> -
> -	sd = devm_kzalloc(&pdev->dev, sizeof(*sd) * tmp, GFP_KERNEL);
> -	if (!sd)
> -		return NULL;
> -
> -	pdata->sd = sd;
> -	pdata->sd_count = tmp;
> -
> -	for_each_child_of_node(sn, cn) {
> -		sd->dma_dev = &pdev->dev;
> -		of_property_read_string(cn, "bus_id", &sd->bus_id);
> -		of_property_read_u32(cn, "cfg_hi", &sd->cfg_hi);
> -		of_property_read_u32(cn, "cfg_lo", &sd->cfg_lo);
> -		if (!of_property_read_u32(cn, "src_master", &tmp))
> -			sd->src_master = tmp;
> -
> -		if (!of_property_read_u32(cn, "dst_master", &tmp))
> -			sd->dst_master = tmp;
> -		sd++;
> -	}
> -
>  	return pdata;
>  }
>  #else
> @@ -1705,8 +1696,6 @@ static int dw_probe(struct platform_device *pdev)
>  	clk_prepare_enable(dw->clk);
>  
>  	dw->regs = regs;
> -	dw->sd = pdata->sd;
> -	dw->sd_count = pdata->sd_count;
>  
>  	/* get hardware configuration parameters */
>  	if (autocfg) {
> @@ -1837,6 +1826,14 @@ static int dw_probe(struct platform_device *pdev)
>  
>  	dma_async_device_register(&dw->dma);
>  
> +	if (pdev->dev.of_node) {
> +		err = of_dma_controller_register(pdev->dev.of_node,
> +						 dw_dma_xlate, dw);
> +		if (err && err != -ENODEV)
> +			dev_err(&pdev->dev,
> +				"could not register of_dma_controller\n");
> +	}
> +
>  	return 0;
>  }
>  
> @@ -1845,6 +1842,8 @@ static int dw_remove(struct platform_device *pdev)
>  	struct dw_dma		*dw = platform_get_drvdata(pdev);
>  	struct dw_dma_chan	*dwc, *_dwc;
>  
> +	if (pdev->dev.of_node)
> +		of_dma_controller_free(pdev->dev.of_node);
>  	dw_dma_off(dw);
>  	dma_async_device_unregister(&dw->dma);
>  
> diff --git a/drivers/dma/dw_dmac_regs.h b/drivers/dma/dw_dmac_regs.h
> index 88dd8eb..cf0ce5c 100644
> --- a/drivers/dma/dw_dmac_regs.h
> +++ b/drivers/dma/dw_dmac_regs.h
> @@ -13,6 +13,7 @@
>  #include <linux/dw_dmac.h>
>  
>  #define DW_DMA_MAX_NR_CHANNELS	8
> +#define DW_DMA_MAX_NR_REQUESTS	16
>  
>  /* flow controller */
>  enum dw_dma_fc {
> @@ -211,6 +212,8 @@ struct dw_dma_chan {
>  	/* hardware configuration */
>  	unsigned int		block_size;
>  	bool			nollp;
> +	unsigned int		request_line;
> +	struct dw_dma_slave	slave;
>  
>  	/* configuration passed via DMA_SLAVE_CONFIG */
>  	struct dma_slave_config dma_sconfig;
> @@ -239,10 +242,6 @@ struct dw_dma {
>  	struct tasklet_struct	tasklet;
>  	struct clk		*clk;
>  
> -	/* slave information */
> -	struct dw_dma_slave	*sd;
> -	unsigned int		sd_count;
> -
>  	u8			all_chan_mask;
>  
>  	/* hardware configuration */
> diff --git a/include/linux/dw_dmac.h b/include/linux/dw_dmac.h
> index 41766de..481ab23 100644
> --- a/include/linux/dw_dmac.h
> +++ b/include/linux/dw_dmac.h
> @@ -27,7 +27,6 @@
>   */
>  struct dw_dma_slave {
>  	struct device		*dma_dev;
> -	const char		*bus_id;
>  	u32			cfg_hi;
>  	u32			cfg_lo;
>  	u8			src_master;
> @@ -60,9 +59,6 @@ struct dw_dma_platform_data {
>  	unsigned short	block_size;
>  	unsigned char	nr_masters;
>  	unsigned char	data_width[4];
> -
> -	struct dw_dma_slave *sd;
> -	unsigned int sd_count;
>  };
>  
>  /* bursts size */
> @@ -114,6 +110,5 @@ void dw_dma_cyclic_stop(struct dma_chan *chan);
>  dma_addr_t dw_dma_get_src_addr(struct dma_chan *chan);
>  
>  dma_addr_t dw_dma_get_dst_addr(struct dma_chan *chan);
> -bool dw_dma_generic_filter(struct dma_chan *chan, void *param);
>  
>  #endif /* DW_DMAC_H */
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/