[PATCH] mfd: arizona: Support configuring MICBIASes into bypass mode
From: Mark Brown
Date: Wed Mar 13 2013 - 06:54:56 EST
Signed-off-by: Mark Brown <broonie@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
---
drivers/mfd/arizona-core.c | 12 +++++++++++-
include/linux/mfd/arizona/pdata.h | 1 +
2 files changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c
index b562c7b..c9df7be 100644
--- a/drivers/mfd/arizona-core.c
+++ b/drivers/mfd/arizona-core.c
@@ -511,10 +511,16 @@ int arizona_dev_init(struct arizona *arizona)
}
for (i = 0; i < ARIZONA_MAX_MICBIAS; i++) {
- if (!arizona->pdata.micbias[i].mV)
+ if (!arizona->pdata.micbias[i].mV &&
+ !arizona->pdata.micbias[i].bypass)
continue;
+ /* Apply default for bypass mode */
+ if (!arizona->pdata.micbias[i].mV)
+ arizona->pdata.micbias[i].mV = 2800;
+
val = (arizona->pdata.micbias[i].mV - 1500) / 100;
+
val <<= ARIZONA_MICB1_LVL_SHIFT;
if (arizona->pdata.micbias[i].ext_cap)
@@ -526,10 +532,14 @@ int arizona_dev_init(struct arizona *arizona)
if (arizona->pdata.micbias[i].fast_start)
val |= ARIZONA_MICB1_RATE;
+ if (arizona->pdata.micbias[i].bypass)
+ val |= ARIZONA_MICB1_BYPASS;
+
regmap_update_bits(arizona->regmap,
ARIZONA_MIC_BIAS_CTRL_1 + i,
ARIZONA_MICB1_LVL_MASK |
ARIZONA_MICB1_DISCH |
+ ARIZONA_MICB1_BYPASS |
ARIZONA_MICB1_RATE, val);
}
diff --git a/include/linux/mfd/arizona/pdata.h b/include/linux/mfd/arizona/pdata.h
index 455c51d..779b7b8 100644
--- a/include/linux/mfd/arizona/pdata.h
+++ b/include/linux/mfd/arizona/pdata.h
@@ -78,6 +78,7 @@ struct arizona_micbias {
unsigned int ext_cap:1; /** External capacitor fitted */
unsigned int discharge:1; /** Actively discharge */
unsigned int fast_start:1; /** Enable aggressive startup ramp rate */
+ unsigned int bypass:1; /** Use bypass mode */
};
struct arizona_micd_config {
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/