[PATCH] phy: Elimination the forced speed reduction algorithm.

From: Kirill Kapranov
Date: Thu Mar 14 2013 - 06:41:37 EST


In case of fixed speed set up for a NIC (e.g. ethtool -s eth0 autoneg off speed
100 duplex full) with an ethernet cable plugged off, the mentioned algorithm
slows down a NIC speed, so further cable hook-up leads to nonoperable link state.

Signed-off-by: Kirill Kapranov <kapranoff@xxxxxxxx>
---
drivers/net/phy/phy.c | 47 -----------------------------------------------
1 files changed, 0 insertions(+), 47 deletions(-)

diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index ef9ea92..0e40170 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -463,33 +463,6 @@ void phy_stop_machine(struct phy_device *phydev)
}

/**
- * phy_force_reduction - reduce PHY speed/duplex settings by one step
- * @phydev: target phy_device struct
- *
- * Description: Reduces the speed/duplex settings by one notch,
- * in this order--
- * 1000/FULL, 1000/HALF, 100/FULL, 100/HALF, 10/FULL, 10/HALF.
- * The function bottoms out at 10/HALF.
- */
-static void phy_force_reduction(struct phy_device *phydev)
-{
- int idx;
-
- idx = phy_find_setting(phydev->speed, phydev->duplex);
-
- idx++;
-
- idx = phy_find_valid(idx, phydev->supported);
-
- phydev->speed = settings[idx].speed;
- phydev->duplex = settings[idx].duplex;
-
- pr_info("Trying %d/%s\n",
- phydev->speed, DUPLEX_FULL == phydev->duplex ? "FULL" : "HALF");
-}
-
-
-/**
* phy_error - enter HALTED state for this PHY device
* @phydev: target phy_device struct
*
@@ -818,30 +791,11 @@ void phy_state_machine(struct work_struct *work)
phydev->adjust_link(phydev->attached_dev);

} else if (0 == phydev->link_timeout--) {
- int idx;
-
needs_aneg = 1;
/* If we have the magic_aneg bit,
* we try again */
if (phydev->drv->flags & PHY_HAS_MAGICANEG)
break;
-
- /* The timer expired, and we still
- * don't have a setting, so we try
- * forcing it until we find one that
- * works, starting from the fastest speed,
- * and working our way down */
- idx = phy_find_valid(0, phydev->supported);
-
- phydev->speed = settings[idx].speed;
- phydev->duplex = settings[idx].duplex;
-
- phydev->autoneg = AUTONEG_DISABLE;
-
- pr_info("Trying %d/%s\n",
- phydev->speed,
- DUPLEX_FULL == phydev->duplex ?
- "FULL" : "HALF");
}
break;
case PHY_NOLINK:
@@ -867,7 +821,6 @@ void phy_state_machine(struct work_struct *work)
netif_carrier_on(phydev->attached_dev);
} else {
if (0 == phydev->link_timeout--) {
- phy_force_reduction(phydev);
needs_aneg = 1;
}
}
--
1.7.2.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/