Re: [PATCH RFC] ARM: dts: mxs: leave card detect out of common mmc pins config

[Marek Vasut]

Dear Hector Palacios,

> Dear Marek Vasut,
> 
> On 04/08/2013 06:28 PM, Marek Vasut wrote:
> > Dear Shawn Guo,
> > 
> >> On Mon, Apr 08, 2013 at 03:58:05PM +0200, Hector Palacios wrote:
> >>> On 04/08/2013 02:48 PM, Shawn Guo wrote:
> >>>> On Mon, Apr 08, 2013 at 12:12:20PM +0200, Hector Palacios wrote:
> >>>>> MicroSD card sockets don't usually have card detect line. This pin
> >>>>> is actually not needed for the MMC to work and it is more of a
> >>>>> platform design decission to have it.
> >>>>> The card detect pin already has a configuration entry of its own:
> >>>>> 'mmc0_cd_cfg' so we complete the iomux configuration here and let
> >>>>> platforms to include it or not depending on whether the card detect
> >>>>> line is routed to the SD socket.
> >>>> 
> >>>> Sounds sensible.
> >>>> 
> >>>>> Signed-off-by: Hector Palacios <hector.palacios@xxxxxxxx>
> >>>>> ---
> >>>>> 
> >>>>> Hello,
> >>>>> 
> >>>>> All imx28 based platforms except 'bluegiga,apx4devkit' and
> >>>>> 'schulercontrol,imx28-sps1', use 'mmc0_cd_cfg' in their mmc
> >>>>> configuration so please check whether this patch would break these
> >>>>> platforms.
> >>>> 
> >>>> I just tested the patch on imx28-evk and card-detection still works. 
> >>>> So patches applied, thanks.
> >>> 
> >>> The EVK and most platforms will work because they are using
> >>> 'mmc0_cd_cfg' so actually this patch does not change anything on
> >>> them.
> >>> Platforms 'bluegiga,apx4devkit' and 'schulercontrol,imx28-sps1'
> >>> however are not referencing 'mmc0_cd_cfg' so after applying this
> >>> patch they will have unconfigured CD line and they may break.
> >> 
> >> Ah, yes.  I thought that any board that has CD support has to reference
> >> 'mmc0_cd_cfg'.  That's not necessarily true.
> >> 
> >>> The driver will call get_cd() upon probing, which returns the status of
> >>> the CD line. Please check these two platforms before applying.
> >> 
> >> Ok, let's wait for people owning the boards to confirm.
> > 
> > Maybe you want to use MMC_CAP_NEEDS_POLL as was noted by someone before
> > on the olinuxino -- the slot is there, it's just the CD line that's
> > missing.
> 
> I'm not sure of what you mean. The mxs-mmc.c driver already sets the
> MMC_CAP_NEEDS_POLL flag by default in the probe() function. My platform
> does not even route the CD line because the microSD socket does not have
> it.
> So what I have done is modify the driver to parse the property
> 'non-removable' from the device tree in order to set the
> MMC_CAP_NONREMOVABLE flag:

Yes, I get it. I have two remarks still:
1) The card is removable (you can pull it out from olinuxino's slot)
2) Why is the NEEDS_POLL set by default ?
3) Does the NEEDS_POLL not solve the issue with missing CD line?

Best regards,
Marek Vasut
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/