Re: [5/7] i2c-designware: enable/disable the controller properly

[Wolfram Sang]

On Tue, Apr 09, 2013 at 12:28:36PM +0300, Mika Westerberg wrote:
> On Tue, Apr 09, 2013 at 11:09:14AM +0200, Wolfram Sang wrote:
> > 
> > > +static void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable)
> > > +{
> > > +	int timeout = 100;
> > > +
> > > +	do {
> > > +		dw_writel(dev, enable, DW_IC_ENABLE);
> > > +		if ((dw_readl(dev, DW_IC_ENABLE_STATUS) & 1) == enable)
> > > +			return;
> > > +
> > > +		usleep_range(25, 250);
> > 
> > This would wait 25ms max. Is there a timeout value specified in the docs?
> 
> The datasheet says something like:
> 
> 	1. Define a timer interval (t_i2c_poll) equal 10 times the highest
> 	signaling period. For 400kHz this is 25us.
> 
> 	2. Define max timeout parameter, MAX_T_POLL_COUNT, such that if any
> 	repeated operation exeeds this maximum, an error is reported.
> 
> In this case I have:
> 
> 	t_i2c_poll = 25 (to 250 us)
> 	MAX_T_POLL_COUNT = 100

Maybe worth a comment?

Other than that, the series looks fine to me.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/