[RFC PATCH V2] OMAP: add devicetree support for clock nodes.(rev 2)
From: Nishanth Menon
Date: Tue Mar 26 2013 - 06:23:27 EST
Dummy patch based on Roger's original idea
this time have lesser possibiltiy of screwing up indices. instead
use a specific integer ID to uniquely (TI SoC wide) identify an clock.
on the flip side, we do not all make clock nodes to be accesible from DT
clock indexing.
Nyet-Signed-off-by: Nishanth Menon <nm@xxxxxx>
---
.../devicetree/bindings/clock/ti,clock.txt | 48 +++++++++++
arch/arm/boot/dts/omap3.dtsi | 5 ++
arch/arm/boot/dts/omap34xx.dtsi | 2 +
arch/arm/boot/dts/omap4.dtsi | 5 ++
arch/arm/boot/dts/omap443x.dtsi | 2 +
arch/arm/mach-omap2/cclock3xxx_data.c | 5 +-
arch/arm/mach-omap2/cclock44xx_data.c | 5 +-
arch/arm/mach-omap2/clock.h | 12 +++
arch/arm/mach-omap2/pm.c | 11 ++-
drivers/clk/Kconfig | 6 ++
drivers/clk/Makefile | 2 +
drivers/clk/ti.c | 85 ++++++++++++++++++++
include/linux/clk/ti.h | 30 +++++++
13 files changed, 211 insertions(+), 7 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/ti,clock.txt
create mode 100644 drivers/clk/ti.c
create mode 100644 include/linux/clk/ti.h
diff --git a/Documentation/devicetree/bindings/clock/ti,clock.txt b/Documentation/devicetree/bindings/clock/ti,clock.txt
new file mode 100644
index 0000000..53c947c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,clock.txt
@@ -0,0 +1,48 @@
+* Clock bindings for Texas Instruments clocks
+
+Required properties:
+- compatible: Should be "ti,clock"
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. The following is a list of ID reservations
+across TI SoCs
+
+ Clock ID
+ ------------------
+ cpu clock 1
+
+The definition is used by SoC clock data using CLKDT() macro
+(example of OMAP2+).
+
+Example Steps:
+/* step 1: definiting an SoC nodes compatible with ti clocks -skip if already done */
+clks: clocks {
+ compatible = "ti,clock";
+ #clock-cells = <1>;
+};
+
+/* step 2: Modify the bindings documentation to reserve an ID */
+ auxclk0_ck 2
+ auxclk1_ck 3
+ auxclk2_ck 4
+ auxclk3_ck 5
+ auxclk4_ck 6
+ auxclk5_ck 7
+etc. use an unique number not conflicting with previous reservations.
+WARNING: DONOT insert values - this breaks backward compatibility.
+/* Step 3: replace in clock data file */
+ CLK(NULL, "auxclk0_ck", &auxclk0_ck, CK_443X),
+with
+ CLKDT(2, NULL, "auxclk0_ck", &auxclk0_ck, CK_443X),
+
+/* step 4: in device tree entry, now we can use index 2 to uniquely identify auxclk0 clock */
+
+hsusb1_phy: hsusb1_phy {
+ compatible = "usb-nop-xceiv";
+ reset-supply = <&hsusb1_reset>;
+ clocks = <&aux_clks 2>;
+ clock-names = "main_clk";
+ clock-frequency = <19200000>;
+};
+
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 3344f05..a08990d 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -73,6 +73,11 @@
ti,hwmods = "counter_32k";
};
+ clks: clocks {
+ compatible = "ti,clock";
+ #clock-cells = <1>;
+ };
+
intc: interrupt-controller@48200000 {
compatible = "ti,omap2-intc";
interrupt-controller;
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index 75ed4ae..de59fb8 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -23,6 +23,8 @@
600000 1350000
>;
clock-latency = <300000>; /* From legacy driver */
+ clocks = <&clks 1>;
+ clock-names = "cpu";
};
};
};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 3329140..ad18d6a 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -106,6 +106,11 @@
ti,hwmods = "counter_32k";
};
+ clks: clocks {
+ compatible = "ti,clock";
+ #clock-cells = <1>;
+ };
+
omap4_pmx_core: pinmux@4a100040 {
compatible = "ti,omap4-padconf", "pinctrl-single";
reg = <0x4a100040 0x0196>;
diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
index cccf39a..5bfc02b 100644
--- a/arch/arm/boot/dts/omap443x.dtsi
+++ b/arch/arm/boot/dts/omap443x.dtsi
@@ -22,6 +22,8 @@
1008000 1375000
>;
clock-latency = <300000>; /* From legacy driver */
+ clocks = <&clks 1>;
+ clock-names = "cpu";
};
};
};
diff --git a/arch/arm/mach-omap2/cclock3xxx_data.c b/arch/arm/mach-omap2/cclock3xxx_data.c
index 4579c3c..2f2932b 100644
--- a/arch/arm/mach-omap2/cclock3xxx_data.c
+++ b/arch/arm/mach-omap2/cclock3xxx_data.c
@@ -22,6 +22,7 @@
#include <linux/clk-private.h>
#include <linux/list.h>
#include <linux/io.h>
+#include <linux/clk/ti.h>
#include "soc.h"
#include "iomap.h"
@@ -3501,7 +3502,7 @@ static struct omap_clk omap3xxx_clks[] = {
CLK(NULL, "uart4_ick", &uart4_ick_am35xx, CK_AM35XX),
CLK(NULL, "timer_32k_ck", &omap_32k_fck, CK_3XXX),
CLK(NULL, "timer_sys_ck", &sys_ck, CK_3XXX),
- CLK(NULL, "cpufreq_ck", &dpll1_ck, CK_3XXX),
+ CLKDT(1, NULL, "cpufreq_ck", &dpll1_ck, CK_3XXX),
};
static const char *enable_init_clks[] = {
@@ -3574,7 +3575,7 @@ int __init omap3xxx_clk_init(void)
for (c = omap3xxx_clks; c < omap3xxx_clks + ARRAY_SIZE(omap3xxx_clks);
c++)
if (c->cpu & cpu_clkflg) {
- clkdev_add(&c->lk);
+ ti_clk_node_add(&c->lk, c->dt_clkid);
if (!__clk_init(NULL, c->lk.clk))
omap2_init_clk_hw_omap_clocks(c->lk.clk);
}
diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c
index 0c6834a..74d4e8c 100644
--- a/arch/arm/mach-omap2/cclock44xx_data.c
+++ b/arch/arm/mach-omap2/cclock44xx_data.c
@@ -27,6 +27,7 @@
#include <linux/clk-private.h>
#include <linux/clkdev.h>
#include <linux/io.h>
+#include <linux/clk/ti.h>
#include "soc.h"
#include "iomap.h"
@@ -1672,7 +1673,7 @@ static struct omap_clk omap44xx_clks[] = {
CLK("4013a000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
CLK("4013c000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
CLK("4013e000.timer", "timer_sys_ck", &syc_clk_div_ck, CK_443X),
- CLK(NULL, "cpufreq_ck", &dpll_mpu_ck, CK_443X),
+ CLKDT(1, NULL, "cpufreq_ck", &dpll_mpu_ck, CK_443X),
};
int __init omap4xxx_clk_init(void)
@@ -1697,7 +1698,7 @@ int __init omap4xxx_clk_init(void)
for (c = omap44xx_clks; c < omap44xx_clks + ARRAY_SIZE(omap44xx_clks);
c++) {
if (c->cpu & cpu_clkflg) {
- clkdev_add(&c->lk);
+ ti_clk_node_add(&c->lk, c->dt_clkid);
if (!__clk_init(NULL, c->lk.clk))
omap2_init_clk_hw_omap_clocks(c->lk.clk);
}
diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h
index 60ddd86..9a7c95b 100644
--- a/arch/arm/mach-omap2/clock.h
+++ b/arch/arm/mach-omap2/clock.h
@@ -23,10 +23,22 @@
#include <linux/clk-provider.h>
struct omap_clk {
+ u16 dt_clkid;
u16 cpu;
struct clk_lookup lk;
};
+#define CLKDT(id, dev, con, ck, cp) \
+ { \
+ .dt_clkid = id, \
+ .cpu = cp, \
+ .lk = { \
+ .dev_id = dev, \
+ .con_id = con, \
+ .clk = ck, \
+ }, \
+ }
+
#define CLK(dev, con, ck, cp) \
{ \
.cpu = cp, \
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index a47e6ee..03c6e48 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -55,6 +55,12 @@ config COMMON_CLK_MAX77686
---help---
This driver supports Maxim 77686 crystal oscillator clock.
+config COMMON_CLK_TI
+ tristate "Clock driver for TI SoCs"
+ depends on ARCH_OMAP && OF
+ ---help---
+ Fill me up.. some generic statement ofcourse (lets start with OMAP)
+
config CLK_TWL6040
tristate "External McPDM functional clock from twl6040"
depends on TWL6040_CORE
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 300d477..9621815 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -30,6 +30,8 @@ obj-$(CONFIG_ARCH_TEGRA) += tegra/
obj-$(CONFIG_X86) += x86/
+obj-$(CONFIG_COMMON_CLK_TI) += ti.o
+
# Chip specific
obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
diff --git a/drivers/clk/ti.c b/drivers/clk/ti.c
new file mode 100644
index 0000000..56b8754
--- /dev/null
+++ b/drivers/clk/ti.c
@@ -0,0 +1,85 @@
+/*
+ * TI Clock node provider
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Nishanth Menon
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/clk-private.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/clk/ti.h>
+
+struct ti_clk {
+ struct clk_lookup *lk;
+ u16 id;
+ struct list_head node;
+};
+
+static LIST_HEAD(ti_clk_list);
+
+static struct clk *ti_bypass_clk_get_by_name(struct of_phandle_args *clkspec,
+ void *data)
+{
+ struct ti_clk *c;
+ int idx = clkspec->args[0];
+
+ list_for_each_entry(c, &ti_clk_list, node) {
+ if (idx == c->id)
+ return c->lk->clk;
+ }
+
+ pr_err("%s: Clock ID %d not found in list\n", __func__, idx);
+ return ERR_PTR(-ENODEV);
+}
+
+static void __init ti_clock_init(struct device_node *node)
+{
+
+ pr_err("%s: START\n", __func__);
+ of_clk_add_provider(node, ti_bypass_clk_get_by_name, NULL);
+ pr_err("%s: END\n", __func__);
+}
+CLK_OF_DECLARE(ti_clk, "ti,clock", ti_clock_init);
+
+void __init ti_clk_node_add(struct clk_lookup *lk, u16 id)
+{
+ struct ti_clk *c;
+ static bool of_added;
+
+ if (lk->dev_id || !id)
+ goto out;
+
+ /* No lists if we did not boot supported by DT entries */
+ if (!of_have_populated_dt())
+ goto out;
+
+ c = kzalloc(sizeof(struct ti_clk), GFP_KERNEL);
+ if (!c) {
+ pr_err("%s: No memory!! cannot add clk node for DT!\n",
+ __func__);
+ /* lets try atleast an regular clock node */
+ goto out;
+ }
+ c->lk = lk;
+ c->id = id;
+ list_add_tail(&c->node, &ti_clk_list);
+ pr_err("%s: Added clock node %s\n", __func__, lk->con_id);
+ if (!of_added) {
+ of_clk_init(NULL);
+ of_added = true;
+ }
+out:
+ clkdev_add(lk);
+};
diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h
new file mode 100644
index 0000000..ebed98a
--- /dev/null
+++ b/include/linux/clk/ti.h
@@ -0,0 +1,30 @@
+/*
+ * TI Clock node provider header
+ *
+ * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
+ * Nishanth Menon
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __TI_CLK_H
+#define __TI_CLK_H
+
+#include <linux/clkdev.h>
+
+#ifdef CONFIG_OF
+extern void ti_clk_node_add(struct clk_lookup *lk, u16 id);
+#else
+static inline void ti_clk_node_add(struct clk_lookup *lk, u16 id)
+{
+ clkdev_add(lk);
+}
+#endif /* CONFIG_OF */
+
+#endif /* __TI_CLK_H */
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 8d15f9a..6cf95160 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -267,7 +267,12 @@ static void __init omap4_init_voltages(void)
static inline void omap_init_cpufreq(void)
{
- struct platform_device_info devinfo = { .name = "omap-cpufreq", };
+ struct platform_device_info devinfo = { };
+
+ if (!of_have_populated_dt())
+ devinfo.name = "omap-cpufreq";
+ else
+ devinfo.name = "cpufreq-cpu0";
platform_device_register_full(&devinfo);
}
@@ -301,9 +306,9 @@ int __init omap2_common_pm_late_init(void)
/* Smartreflex device init */
omap_devinit_smartreflex();
- /* cpufreq dummy device instantiation */
- omap_init_cpufreq();
}
+ /* cpufreq dummy device instantiation */
+ omap_init_cpufreq();
#ifdef CONFIG_SUSPEND
suspend_set_ops(&omap_pm_ops);
--
1.7.9.5
--
Regards,
Nishanth Menon
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/