Re: [PATCH] RFC: mmc: dw_mmc: Always go to STATE_DATA_BUSY fromSTATE_DATA_ERROR

[Jaehoon Chung]

On 04/10/2013 04:02 PM, Seungwon Jeon wrote:
> On Tuesday, April 09, 2013, Doug Anderson wrote:
>> Seungwon,
>>
>> On Mon, Apr 8, 2013 at 5:17 AM, Seungwon Jeon <tgih.jun@xxxxxxxxxxx> wrote:
>>> I guess Doug are debugging it with wifi, right?
>>
>> Yes, we're debugging it on the Samsung ARM Chromebook on a part that
>> has an SDIO WiFi module by Marvell.  Bing Zhao (CCed) has a unit in
>> hand that generates lots of CRC errors and has been testing patches
>> I've sent him.
>>
>>
>>> The problem happens when dw_mci_stop_dma is called in the middle of data transfers.
>>> If data error occurs in the end of block, EVENT_XFER_COMPLETE might be set. So, it's fine.
>>> Actually, dw_mci_idmac_stop_dma stops the dma working, there is no further interrupt for dma
>> completion.
>>
>> That sounds right to me.
>>
>>
>>> There are two solutions we have applied.
>>
>> I'm a little confused.  Have you already applied one or both of the
>> solutions you list below, or are you proposing them as alternates to
>> the patch I submitted?
> Yes, first one already has been applied.
> I wanted to introduce our fix. Did you try to test with these fixes?
Actually i have tested with Seungwon's fixes. It looks good.

> 
>>
>>> #1. deferring the call of dw_mci_stop_dma until EVENT_XFER_COMPLETE flag is set into pending_events.
>>> In this case, dma transfer will be continued with error.
>>>
>>> @@ -1062,7 +1062,6 @@ static void dw_mci_tasklet_func(unsigned long priv)
>>>                 case STATE_SENDING_DATA:
>>>                         if (test_and_clear_bit(EVENT_DATA_ERROR,
>>>                                                &host->pending_events)) {
>>> -                               dw_mci_stop_dma(host);
>>>                                 if (data->stop)
>>>                                         send_stop_cmd(host, data);
>>>                                 state = STATE_DATA_ERROR;
>>> @@ -1155,6 +1154,9 @@ static void dw_mci_tasklet_func(unsigned long priv)
>>>                                                 &host->pending_events))
>>>                                 break;
>>>
>>> +                       dw_mci_stop_dma(host);
>>> +                       set_bit(EVENT_XFER_COMPLETE, &host->completed_events);
>>> +
>>>                         state = STATE_DATA_BUSY;
>>>                         break;
>>
>> I can't say that I'm quite familiar enough with the intricate details
>> of the driver to know whether this is a good idea or guaranteed to
>> work.  Do we really think that we'll still get the end of the transfer
>> properly if we've seen an error already?  I worry that we won't.
> For example, let's pretend data CRC error occurs during data read.
> Peer device doesn't know that error occurrence and data transmission still keeps going.
> dma will run as long as host doesn't take the stop or see the end of descriptor.
>>
>>
>>> #2. set EVENT_XFER_COMPLETE flag when dw_mci_stop_dma is called regardless using_dma.
>>>
>>> @@ -299,10 +299,9 @@ static void dw_mci_stop_dma(struct dw_mci *host)
>>>         if (host->using_dma) {
>>>                 host->dma_ops->stop(host);
>>>                 host->dma_ops->cleanup(host);
>>> -       } else {
>>> -               /* Data transfer was stopped by the interrupt handler */
>>> -               set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
>>>         }
>>> +
>>> +       set_bit(EVENT_XFER_COMPLETE, &host->pending_events);
>>>  }
>>
>> This is fairly similar to my patch but goes further.  I believe my
>> patch has this effect but only for the call to dw_mci_stop_dma() in
>> STATE_SENDING_DATA in the tasklet.  Your affects all 3 calls to
>> dw_mci_stop_dma().
I think we can also use the second approach.
but i think that it also needs to test with this.
>>
>> This seems reasonable but I don't have confidence in my understanding
>> of this driver's state machine (especially with regards to the error
>> conditions) that I can say which is better.  If you think that this is
>> a more correct solution than mine then we can give it some testing.
> Yes. As a result, both patches prevent tasklet's hanging.
> In that regard, two patches give the similar effect.
> But I think your fix are just removing the test_bit to wait for EVENT_XFER_COMPLETE.
> 'clear_bit(...) part which is added might be of no effect.
> It doesn't make sense a bit.
> 
> <quotation>
>  		case STATE_DATA_ERROR:
> -			if (!test_and_clear_bit(EVENT_XFER_COMPLETE,
> -						&host->pending_events))
> -				break;
> -
> +			clear_bit(EVENT_XFER_COMPLETE, &host->pending_events);
> </quotation>
> 
> Thanks,
> Seugwon Jeon
>>
>> Thanks!
>>
>> -Doug
>> --
>> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
>> the body of a message to majordomo@xxxxxxxxxxxxxxx
>> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/