[PATCH v6 0/3] of/pci: Provide common support for PCI DT parsing

[Andrew Murray]

This patchset factors out duplicated code associated with parsing PCI
DT "ranges" properties across the architectures and introduces a
"ranges" parser. This parser "of_pci_range_parser" can be used directly
by ARM host bridge drivers enabling them to obtain ranges from device
trees.

I've included the Reviewed-by and Tested-by's received from v5 in this
patchset, earlier versions of this patchset (v3) have been tested-by:

Thierry Reding <thierry.reding@xxxxxxxxxxxxxxxxx>
Jingoo Han <jg1.han@xxxxxxxxxxx>

I believe a version of this patchset has also been tested through its
inclusion in Thomas Petazzoni's Armada 370 and Armada XP SoCs PCIe support by:

Linus Walleij <linus.walleij@xxxxxxxxxx>

I've tested that this patchset builds and runs on ARM and that it builds on
PowerPC.

Compared to the v5 sent by Andrew Murray, the following changes have
been made:

 * Use of CONFIG_64BIT instead of CONFIG_[a32bitarch] as suggested by
   Rob Herring in drivers/of/of_pci.c

 * Added forward declaration of struct pci_controller in linux/of_pci.h
   to prevent compiler warning as suggested by Thomas Petazzoni

 * Improved error checking (!range check), removal of unnecessary be32_to_cpup
   call, improved formatting of struct of_pci_range_parser layout and
   replacement of macro with a static inline. All suggested by Rob Herring.

Compared to the v4 (incorrectly labelled v3) sent by Andrew Murray,
the following changes have been made:

 * Split the patch as suggested by Rob Herring

Compared to the v3 sent by Andrew Murray, the following changes have
been made:

 * Unify and move duplicate pci_process_bridge_OF_ranges functions to
   drivers/of/of_pci.c as suggested by Rob Herring

 * Fix potential build errors with Microblaze/MIPS

Compared to "[PATCH v5 01/17] of/pci: Provide support for parsing PCI DT
ranges property", the following changes have been made:

 * Correct use of IORESOURCE_* as suggested by Russell King

 * Improved interface and naming as suggested by Thierry Reding

Compared to the v2 sent by Andrew Murray, Thomas Petazzoni did:

 * Add a memset() on the struct of_pci_range_iter when starting the
   for loop in for_each_pci_range(). Otherwise, with an uninitialized
   of_pci_range_iter, of_pci_process_ranges() may crash.

 * Add parenthesis around 'res', 'np' and 'iter' in the
   for_each_of_pci_range macro definitions. Otherwise, passing
   something like &foobar as 'res' didn't work.

 * Rebased on top of 3.9-rc2, which required fixing a few conflicts in
   the Microblaze code.

v2:
  This follows on from suggestions made by Grant Likely
  (marc.info/?l=linux-kernel&m=136079602806328)

Andrew Murray (3):
  of/pci: Unify pci_process_bridge_OF_ranges from Microblaze and
    PowerPC
  of/pci: Provide support for parsing PCI DT ranges property
  of/pci: mips: convert to common of_pci_range_parser

 arch/microblaze/include/asm/pci-bridge.h |    5 +-
 arch/microblaze/pci/pci-common.c         |  192 ------------------------------
 arch/mips/pci/pci.c                      |   50 +++------
 arch/powerpc/include/asm/pci-bridge.h    |    5 +-
 arch/powerpc/kernel/pci-common.c         |  192 ------------------------------
 drivers/of/address.c                     |   66 ++++++++++
 drivers/of/of_pci.c                      |  168 ++++++++++++++++++++++++++
 include/linux/of_address.h               |   46 +++++++
 include/linux/of_pci.h                   |    4 +
 9 files changed, 302 insertions(+), 426 deletions(-)

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/