Re: [PATCH] alsa/usb: Add quirk for 192KHz recording on E-Mu devices

[Takashi Iwai]

At Fri, 12 Apr 2013 22:33:59 -0500,
Calvin Owens wrote:
> 
> When recording at 176.2KHz or 192Khz, the device adds a 32-bit length
> header to the capture packets, which obviously needs to be ignored for
> recording to work properly.
> 
> Userspace expected:  L0 L1 L2 R0 R1 R2
> ...but actually got: R2 L0 L1 L2 R0 R1
> 
> Also, the last byte of the length header being interpreted as L0 of
> the first sample caused spikes every 0.5ms, resulting in a loud 16KHz
> tone (about the highest 'B' on a piano) being present throughout
> captures.
> 
> Tested at all sample rates on an E-Mu 0404USB, and tested for
> regressions on a generic USB headset.
> 
> Signed-off-by: Calvin Owens <jcalvinowens@xxxxxxxxx>

Thanks, applied for 3.10 kernel (but with Cc to stable) now.


Takashi

> ---
>  sound/usb/card.h   | 1 +
>  sound/usb/pcm.c    | 2 +-
>  sound/usb/quirks.c | 1 +
>  sound/usb/stream.c | 1 +
>  4 files changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/sound/usb/card.h b/sound/usb/card.h
> index 8a751b4..d32ea41 100644
> --- a/sound/usb/card.h
> +++ b/sound/usb/card.h
> @@ -116,6 +116,7 @@ struct snd_usb_substream {
>  	unsigned int altset_idx;     /* USB data format: index of alternate setting */
>  	unsigned int txfr_quirk:1;	/* allow sub-frame alignment */
>  	unsigned int fmt_type;		/* USB audio format type (1-3) */
> +	unsigned int pkt_offset_adj;	/* Bytes to drop from beginning of packets (for non-compliant devices) */
>  
>  	unsigned int running: 1;	/* running status */
>  
> diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c
> index f94397b..a481fea 100644
> --- a/sound/usb/pcm.c
> +++ b/sound/usb/pcm.c
> @@ -1170,7 +1170,7 @@ static void retire_capture_urb(struct snd_usb_substream *subs,
>  	stride = runtime->frame_bits >> 3;
>  
>  	for (i = 0; i < urb->number_of_packets; i++) {
> -		cp = (unsigned char *)urb->transfer_buffer + urb->iso_frame_desc[i].offset;
> +		cp = (unsigned char *)urb->transfer_buffer + urb->iso_frame_desc[i].offset + subs->pkt_offset_adj;
>  		if (urb->iso_frame_desc[i].status && printk_ratelimit()) {
>  			snd_printdd(KERN_ERR "frame %d active: %d\n", i, urb->iso_frame_desc[i].status);
>  			// continue;
> diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
> index 5325a38..7e292b9 100644
> --- a/sound/usb/quirks.c
> +++ b/sound/usb/quirks.c
> @@ -837,6 +837,7 @@ static void set_format_emu_quirk(struct snd_usb_substream *subs,
>  		break;
>  	}
>  	snd_emuusb_set_samplerate(subs->stream->chip, emu_samplerate_id);
> +	subs->pkt_offset_adj = (emu_samplerate_id >= EMU_QUIRK_SR_176400HZ) ? 4 : 0;
>  }
>  
>  void snd_usb_set_format_quirk(struct snd_usb_substream *subs,
> diff --git a/sound/usb/stream.c b/sound/usb/stream.c
> index ad181d5..0927cc6 100644
> --- a/sound/usb/stream.c
> +++ b/sound/usb/stream.c
> @@ -94,6 +94,7 @@ static void snd_usb_init_substream(struct snd_usb_stream *as,
>  	subs->dev = as->chip->dev;
>  	subs->txfr_quirk = as->chip->txfr_quirk;
>  	subs->speed = snd_usb_get_speed(subs->dev);
> +	subs->pkt_offset_adj = 0;
>  
>  	snd_usb_set_pcm_ops(as->pcm, stream);
>  
> -- 
> 1.8.1.5
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/