[PATCH] trivial: fix some then vs. than typos

From: Guennadi Liakhovetski
Date: Wed Apr 17 2013 - 05:05:04 EST

This patch fixes some of the obvious then vs. than typos.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@xxxxxx>
---

These are just some of the typos, that a simple grep for patterns like

"er,\? then\|more,\? then\|less,\? then"

catches. Of course, they have to be manually verified, they produce a few
false positives, but the success rate isn't too bad :-) Interestingly,
opposites like

"[^e].,\? than\|[^r],\? than"

find almost no real typos. The reader is invited to continue these fixes
;-)

.../ABI/testing/sysfs-class-uwb_rc-wusbhc | 2 +-
Documentation/DocBook/media/v4l/controls.xml | 4 ++--
Documentation/hwmon/lm75 | 2 +-
Documentation/hwmon/thmc50 | 2 +-
Documentation/hwmon/w83781d | 2 +-
Documentation/usb/mass-storage.txt | 4 ++--
Documentation/watchdog/watchdog-kernel-api.txt | 2 +-
arch/arc/include/asm/entry.h | 2 +-
arch/arc/kernel/entry.S | 2 +-
arch/arm/Kconfig | 2 +-
arch/blackfin/lib/udivsi3.S | 2 +-
arch/powerpc/oprofile/op_model_cell.c | 2 +-
arch/x86/kvm/x86.c | 2 +-
13 files changed, 15 insertions(+), 15 deletions(-)

diff --git a/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc b/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc
index 25b1e75..7e405c5 100644
--- a/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc
+++ b/Documentation/ABI/testing/sysfs-class-uwb_rc-wusbhc
@@ -32,7 +32,7 @@ Description:
The maximum PHY rate to use for all connected devices.
This is only of limited use for testing and
development as the hardware's automatic rate
- adaptation is better then this simple control.
+ adaptation is better than this simple control.

Refer to [ECMA-368] section 10.3.1.1 for the value to
use.
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml
index 8d7a779..b72c2b53 100644
--- a/Documentation/DocBook/media/v4l/controls.xml
+++ b/Documentation/DocBook/media/v4l/controls.xml
@@ -2726,7 +2726,7 @@ Applicable to the H264 encoder.</entry>
<entry>enum&nbsp;v4l2_mpeg_mfc51_video_frame_skip_mode</entry>
</row>
<row><entry spanname="descr">
-Indicates in what conditions the encoder should skip frames. If encoding a frame would cause the encoded stream to be larger then
+Indicates in what conditions the encoder should skip frames. If encoding a frame would cause the encoded stream to be larger than
a chosen data limit then the frame will be skipped.
Possible values are:</entry>
</row>
@@ -2756,7 +2756,7 @@ Possible values are:</entry>
If this setting is enabled, then the rate control logic of the encoder will calculate the average bitrate
for a GOP and keep it below or equal the set bitrate target. Otherwise the rate control logic calculates the
overall average bitrate for the stream and keeps it below or equal to the set bitrate. In the first case
-the average bitrate for the whole stream will be smaller then the set bitrate. This is caused because the
+the average bitrate for the whole stream will be smaller than the set bitrate. This is caused because the
average is calculated for smaller number of frames, on the other hand enabling this setting will ensure that
the stream will meet tight bandwidth contraints. Applicable to encoders.
</entry>
diff --git a/Documentation/hwmon/lm75 b/Documentation/hwmon/lm75
index 69af1c7..46245db 100644
--- a/Documentation/hwmon/lm75
+++ b/Documentation/hwmon/lm75
@@ -62,7 +62,7 @@ The LM75 implements one temperature sensor. Limits can be set through the
Overtemperature Shutdown register and Hysteresis register. Each value can be
set and read to half-degree accuracy.
An alarm is issued (usually to a connected LM78) when the temperature
-gets higher then the Overtemperature Shutdown value; it stays on until
+gets higher than the Overtemperature Shutdown value; it stays on until
the temperature falls below the Hysteresis value.
All temperatures are in degrees Celsius, and are guaranteed within a
range of -55 to +125 degrees.
diff --git a/Documentation/hwmon/thmc50 b/Documentation/hwmon/thmc50
index 8a7772a..ab8c900 100644
--- a/Documentation/hwmon/thmc50
+++ b/Documentation/hwmon/thmc50
@@ -36,7 +36,7 @@ many processors), and a controllable fan/analog_out DAC. For the temperature
sensors, limits can be set through the appropriate Overtemperature Shutdown
register and Hysteresis register. Each value can be set and read to half-degree
accuracy. An alarm is issued (usually to a connected LM78) when the
-temperature gets higher then the Overtemperature Shutdown value; it stays on
+temperature gets higher than the Overtemperature Shutdown value; it stays on
until the temperature falls below the Hysteresis value. All temperatures are in
degrees Celsius, and are guaranteed within a range of -55 to +125 degrees.

diff --git a/Documentation/hwmon/w83781d b/Documentation/hwmon/w83781d
index 129b0a3..df8c8fb 100644
--- a/Documentation/hwmon/w83781d
+++ b/Documentation/hwmon/w83781d
@@ -82,7 +82,7 @@ is above the Overtemperature Shutdown value. The driver sets the
hysteresis value for temp1 to 127 at initialization.

For the other temperature sensor(s), an alarm is triggered when the
-temperature gets higher then the Overtemperature Shutdown value; it stays
+temperature gets higher than the Overtemperature Shutdown value; it stays
on until the temperature falls below the Hysteresis value. But on the
W83781D, there is only one alarm that functions for both other sensors!
Temperatures are guaranteed within a range of -55 to +125 degrees. The
diff --git a/Documentation/usb/mass-storage.txt b/Documentation/usb/mass-storage.txt
index 59063ad..093bbd3 100644
--- a/Documentation/usb/mass-storage.txt
+++ b/Documentation/usb/mass-storage.txt
@@ -121,7 +121,7 @@
capped.

If this parameter is provided, and the number of files specified
- in â??fileâ?? argument is greater then the value of â??lunsâ??, all excess
+ in â??fileâ?? argument is greater than the value of â??lunsâ??, all excess
files will be ignored.

If this parameter is not present, the number of logical units will
@@ -174,7 +174,7 @@
Reflects the state of nofua flag for given logical unit. It can
be read and written.

- Other then those, as usual, the values of module parameters can be
+ Other than those, as usual, the values of module parameters can be
read from /sys/module/g_mass_storage/parameters/* files.

* Other gadgets using mass storage function
diff --git a/Documentation/watchdog/watchdog-kernel-api.txt b/Documentation/watchdog/watchdog-kernel-api.txt
index a0438f3..f0335e3 100644
--- a/Documentation/watchdog/watchdog-kernel-api.txt
+++ b/Documentation/watchdog/watchdog-kernel-api.txt
@@ -182,7 +182,7 @@ bit-operations. The status bits that are defined are:
If this bit is set then the watchdog timer will not be able to stop.
* WDOG_UNREGISTERED: this bit gets set by the WatchDog Timer Driver Core
after calling watchdog_unregister_device, and then checked before calling
- any watchdog_ops, so that you can be sure that no operations (other then
+ any watchdog_ops, so that you can be sure that no operations (other than
unref) will get called after unregister, even if userspace still holds a
reference to /dev/watchdog

diff --git a/arch/arc/include/asm/entry.h b/arch/arc/include/asm/entry.h
index eb2ae53..3481cd3 100644
--- a/arch/arc/include/asm/entry.h
+++ b/arch/arc/include/asm/entry.h
@@ -16,7 +16,7 @@
* Normally CPU does this automatically, however when doing FAKE rtie,
* we also need to explicitly do this. The problem in macros
* FAKE_RET_FROM_EXCPN and FAKE_RET_FROM_EXCPN_LOCK_IRQ was that this bit
- * was being "CLEARED" rather then "SET". Actually "SET" clears ZOL context
+ * was being "CLEARED" rather than "SET". Actually "SET" clears ZOL context
*
* Vineetg: May 5th 2008
* -Modified CALLEE_REG save/restore macros to handle the fact that
diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S
index 91eeab8..9346f56 100644
--- a/arch/arc/kernel/entry.S
+++ b/arch/arc/kernel/entry.S
@@ -41,7 +41,7 @@
* Normally CPU does this automatically, however when doing FAKE rtie,
* we need to explicitly do this. The problem in macros
* FAKE_RET_FROM_EXCPN and FAKE_RET_FROM_EXCPN_LOCK_IRQ was that this bit
- * was being "CLEARED" rather then "SET". Since it is Loop INHIBIT Bit,
+ * was being "CLEARED" rather than "SET". Since it is Loop INHIBIT Bit,
* setting it and not clearing it clears ZOL context
*
* Vineetg: May 16th, 2008
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 13b7394..0a3fb7e 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -1648,7 +1648,7 @@ config LOCAL_TIMERS
default y
select HAVE_ARM_TWD if (!ARCH_MSM_SCORPIONMP && !EXYNOS4_MCT)
help
- Enable support for local timers on SMP platforms, rather then the
+ Enable support for local timers on SMP platforms, rather than the
legacy IPI broadcast method. Local timers allows the system
accounting to be spread across the timer interval, preventing a
"thundering herd" at every timer tick.
diff --git a/arch/blackfin/lib/udivsi3.S b/arch/blackfin/lib/udivsi3.S
index 748a6a2..5119871 100644
--- a/arch/blackfin/lib/udivsi3.S
+++ b/arch/blackfin/lib/udivsi3.S
@@ -66,7 +66,7 @@ ENTRY(___udivsi3)
.Ly_16bit:
/* We know that the upper 17 bits of Y might have bits set,
** or that the sign bit of X might have a bit. If Y is a
- ** 16-bit number, but not bigger, then we can use the builtins
+ ** 16-bit number, but not bigger, than we can use the builtins
** with a post-divide correction.
** R3 currently holds Y>>15, which means R3's LSB is the
** bit we're interested in.
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index b9589c1..2bc5b8b 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -1060,7 +1060,7 @@ static int calculate_lfsr(int n)
{
/*
* The ranges and steps are in powers of 2 so the calculations
- * can be done using shifts rather then divide.
+ * can be done using shifts rather than divide.
*/
int index;

diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index f19ac0a..98e7449 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1360,7 +1360,7 @@ static bool kvm_get_time_and_clockread(s64 *kernel_ns, cycle_t *cycle_now)
*
* That is, when timespec0 != timespec1, M < N. Unfortunately that is not
* always the case (the difference between two distinct xtime instances
- * might be smaller then the difference between corresponding TSC reads,
+ * might be smaller than the difference between corresponding TSC reads,
* when updating guest vcpus pvclock areas).
*
* To avoid that problem, do not allow visibility of distinct
--
1.7.2.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/