[PATCH v3] irqchip: Add support for ARMv7-M's NVIC
From: Uwe Kleine-KÃnig
Date: Wed Apr 17 2013 - 12:02:55 EST
This interrupt controller is found on Cortex-M3 and Cortex-M4 machines.
Support for this controller appeared in Catalin's Cortex tree based on
2.6.33 but was nearly completely rewritten.
Signed-off-by: Catalin Marinas <catalin.marinas@xxxxxxx>
Signed-off-by: Uwe Kleine-KÃnig <u.kleine-koenig@xxxxxxxxxxxxxx>
---
Notes:
Changes since v2, sent with
Message-id:1363612826-15623-1-git-send-email-u.kleine-koenig@xxxxxxxxxxxxxx:
- drop superflous check for node != NULL in init function
- rework for linear irq domain
- drop seperate function for non-dt init
This patch triggers two checkpatch warnings:
WARNING: Avoid CamelCase: <nvic_do_IRQ>
WARNING: Avoid CamelCase: <handle_IRQ>
but I think they are OK for consistency?!
Moreover sparse tells me:
drivers/irqchip/irq-nvic.c:58:1: warning: symbol 'nvic_do_IRQ' was not declared. Should it be static?
nvic_do_IRQ is called from assembler only, so a declaration couldn't be
shared and I couldn't find a nice place for a declaration. Suggestions
welcome.
Thanks
Uwe
drivers/irqchip/Kconfig | 4 ++
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-nvic.c | 154 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 159 insertions(+)
create mode 100644 drivers/irqchip/irq-nvic.c
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index a350969..18657fd 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -10,6 +10,10 @@ config ARM_GIC
config GIC_NON_BANKED
bool
+config ARM_NVIC
+ bool
+ select IRQ_DOMAIN
+
config ARM_VIC
bool
select IRQ_DOMAIN
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index 98e3b87..7227c5f 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -7,5 +7,6 @@ obj-$(CONFIG_METAG_PERFCOUNTER_IRQS) += irq-metag.o
obj-$(CONFIG_ARCH_SUNXI) += irq-sunxi.o
obj-$(CONFIG_ARCH_SPEAR3XX) += spear-shirq.o
obj-$(CONFIG_ARM_GIC) += irq-gic.o
+obj-$(CONFIG_ARM_NVIC) += irq-nvic.o
obj-$(CONFIG_ARM_VIC) += irq-vic.o
obj-$(CONFIG_VERSATILE_FPGA_IRQ) += irq-versatile-fpga.o
diff --git a/drivers/irqchip/irq-nvic.c b/drivers/irqchip/irq-nvic.c
new file mode 100644
index 0000000..6e9ca8a
--- /dev/null
+++ b/drivers/irqchip/irq-nvic.c
@@ -0,0 +1,154 @@
+/*
+ * drivers/irq/irq-nvic.c
+ *
+ * Copyright (C) 2008 ARM Limited, All Rights Reserved.
+ * Copyright (C) 2013 Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Support for the Nested Vectored Interrupt Controller found on the
+ * ARMv7-M CPUs (Cortex-M3/M4)
+ */
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+
+#include <asm/v7m.h>
+#include <asm/exception.h>
+
+#include "irqchip.h"
+
+#define NVIC_ISER 0x000
+#define NVIC_ICER 0x080
+#define NVIC_IPR 0x300
+
+#define NVIC_MAX_BANKS 16
+/*
+ * Each bank handles 32 irqs. Only the 16th (= last) bank handles only
+ * 16 irqs.
+ */
+#define NVIC_MAX_IRQ ((NVIC_MAX_BANKS - 1) * 32 + 16)
+
+struct nvic_bank_data {
+ /*
+ * For irq i base holds nvic_base + 4 * i / 32. So you can access the
+ * right ISER register (i.e ISER[i / 32]) by just taking base + ISER.
+ * Ditto for ICER.
+ */
+ void __iomem *base;
+};
+
+static struct nvic_chip_data {
+ struct irq_domain *domain;
+ struct nvic_bank_data bdata[NVIC_MAX_BANKS];
+} nvic_chip_data;
+
+asmlinkage void __exception_irq_entry
+nvic_do_IRQ(irq_hw_number_t hwirq, struct pt_regs *regs)
+{
+ unsigned int irq = irq_linear_revmap(nvic_chip_data.domain, hwirq);
+
+ handle_IRQ(irq, regs);
+}
+
+static inline void __iomem *nvic_bank_base(struct irq_data *d)
+{
+ struct nvic_bank_data *bank_data = irq_data_get_irq_chip_data(d);
+ return bank_data->base;
+}
+
+static void nvic_mask_irq(struct irq_data *d)
+{
+ u32 mask = 1 << (d->hwirq % 32);
+
+ writel_relaxed(mask, nvic_bank_base(d) + NVIC_ICER);
+}
+
+static void nvic_unmask_irq(struct irq_data *d)
+{
+ u32 mask = 1 << (d->hwirq % 32);
+
+ writel_relaxed(mask, nvic_bank_base(d) + NVIC_ISER);
+}
+
+static void nvic_eoi(struct irq_data *d)
+{
+ /*
+ * This is a no-op as end of interrupt is signaled by the exception
+ * return sequence.
+ */
+}
+
+static struct irq_chip nvic_chip = {
+ .name = "NVIC",
+ .irq_mask = nvic_mask_irq,
+ .irq_unmask = nvic_unmask_irq,
+ .irq_eoi = nvic_eoi,
+};
+
+static int nvic_irq_domain_map(struct irq_domain *domain, unsigned int virq,
+ irq_hw_number_t hw)
+{
+ irq_set_chip_and_handler(virq, &nvic_chip,
+ handle_fasteoi_irq);
+ irq_set_chip_data(virq, nvic_chip_data.bdata + hw / 32);
+ set_irq_flags(virq, IRQF_VALID | IRQF_PROBE);
+
+ return 0;
+}
+
+static struct irq_domain_ops nvic_irq_domain_ops = {
+ .xlate = irq_domain_xlate_onetwocell,
+ .map = nvic_irq_domain_map,
+};
+
+static int __init nvic_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ void __iomem *nvic_base;
+ unsigned int irqs, i;
+ unsigned numbanks = (readl_relaxed(V7M_SCS_ICTR) &
+ V7M_SCS_ICTR_INTLINESNUM_MASK) + 1;
+
+ nvic_base = of_iomap(node, 0);
+ if (!nvic_base) {
+ pr_warn("unable to map nvic registers\n");
+ return -ENOMEM;
+ }
+
+ irqs = numbanks * 32;
+ if (irqs > NVIC_MAX_IRQ)
+ irqs = NVIC_MAX_IRQ;
+
+ for (i = 0; i < numbanks; ++i)
+ nvic_chip_data.bdata[i].base = nvic_base + 4 * i;
+
+ nvic_chip_data.domain =
+ irq_domain_add_linear(node, irqs, &nvic_irq_domain_ops, NULL);
+ if (!nvic_chip_data.domain) {
+ pr_warn("Failed to allocate irq domain\n");
+ return -ENOMEM;
+ }
+
+ /* Disable all interrupts */
+ for (i = 0; i < irqs; i += 32)
+ writel_relaxed(~0, nvic_base + NVIC_ICER + i * 4 / 32);
+
+ /* Set priority on all interrupts */
+ for (i = 0; i < irqs; i += 4)
+ writel_relaxed(0, nvic_base + NVIC_IPR + i);
+
+ return 0;
+}
+IRQCHIP_DECLARE(armv7m_nvic, "arm,armv7m-nvic", nvic_of_init);
--
1.8.2.rc3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/