[PATCH 09/32] ARM: ux500: Remove unused 'data_width' attributes from SDI DMA configs

[Lee Jones]

DMA configuration data is now allocated in the MMCI driver, so these
are just ignored.

Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx>
---
 arch/arm/mach-ux500/board-mop500-sdi.c |   16 ----------------
 1 file changed, 16 deletions(-)

diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c
index 5c28216..553ace6 100644
--- a/arch/arm/mach-ux500/board-mop500-sdi.c
+++ b/arch/arm/mach-ux500/board-mop500-sdi.c
@@ -65,16 +65,12 @@ struct stedma40_chan_cfg mop500_sdi0_dma_cfg_rx = {
 	.mode = STEDMA40_MODE_LOGICAL,
 	.dir = STEDMA40_PERIPH_TO_MEM,
 	.dev_type = DB8500_DMA_DEV29_SD_MM0,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
 };
 
 static struct stedma40_chan_cfg mop500_sdi0_dma_cfg_tx = {
 	.mode = STEDMA40_MODE_LOGICAL,
 	.dir = STEDMA40_MEM_TO_PERIPH,
 	.dev_type = DB8500_DMA_DEV29_SD_MM0,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
 };
 #endif
 
@@ -134,16 +130,12 @@ static struct stedma40_chan_cfg sdi1_dma_cfg_rx = {
 	.mode = STEDMA40_MODE_LOGICAL,
 	.dir = STEDMA40_PERIPH_TO_MEM,
 	.dev_type = DB8500_DMA_DEV32_SD_MM1,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
 };
 
 static struct stedma40_chan_cfg sdi1_dma_cfg_tx = {
 	.mode = STEDMA40_MODE_LOGICAL,
 	.dir = STEDMA40_MEM_TO_PERIPH,
 	.dev_type = DB8500_DMA_DEV32_SD_MM1,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
 };
 #endif
 
@@ -169,16 +161,12 @@ struct stedma40_chan_cfg mop500_sdi2_dma_cfg_rx = {
 	.mode = STEDMA40_MODE_LOGICAL,
 	.dir = STEDMA40_PERIPH_TO_MEM,
 	.dev_type =  DB8500_DMA_DEV28_SD_MM2,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
 };
 
 static struct stedma40_chan_cfg mop500_sdi2_dma_cfg_tx = {
 	.mode = STEDMA40_MODE_LOGICAL,
 	.dir = STEDMA40_MEM_TO_PERIPH,
 	.dev_type = DB8500_DMA_DEV28_SD_MM2,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
 };
 #endif
 
@@ -205,16 +193,12 @@ struct stedma40_chan_cfg mop500_sdi4_dma_cfg_rx = {
 	.mode = STEDMA40_MODE_LOGICAL,
 	.dir = STEDMA40_PERIPH_TO_MEM,
 	.dev_type =  DB8500_DMA_DEV42_SD_MM4,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
 };
 
 static struct stedma40_chan_cfg mop500_sdi4_dma_cfg_tx = {
 	.mode = STEDMA40_MODE_LOGICAL,
 	.dir = STEDMA40_MEM_TO_PERIPH,
 	.dev_type = DB8500_DMA_DEV42_SD_MM4,
-	.src_info.data_width = STEDMA40_WORD_WIDTH,
-	.dst_info.data_width = STEDMA40_WORD_WIDTH,
 };
 #endif
 
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/