Re: [PATCH 24/32 v2] dmaengine: ste_dma40: Supply full Device Treeparsing support

From: Lee Jones
Date: Thu Apr 18 2013 - 09:43:25 EST


On Thu, 18 Apr 2013, Arnd Bergmann wrote:

> On Thursday 18 April 2013, Lee Jones wrote:
> > +Clients
> > +Required properties:
> > +- dmas: Comma separated list of dma channel requests
> > +- dma-names: Names of the aforementioned requested channels
> > +
> > +Each dmas request consists of 4 cells:
> > + 1. A phandle pointing to the DMA controller
> > + 2. Device Type
> > + 3. The DMA request line number (only when 'use fixed channel' is set)
> > + 4. A 32bit mask specifying; mode, direction and endianess [NB: This list will grow]
> > + bit 1: Mode:
> > + 0: Logical
> > + 1: Physical
> > + bit 2: Direction:
> > + 0: Mem to Mem
> > + 1: Mem to Dev
>
> You probably mean
>
> 0: Dev to mem
>
> Related to this, I would recommend not listing bit numbers like this, since there
> is some amount of confusion regarding how they are counted: zero-based on one-based
> and LSB-to-MSB or MSB-to-LSB
>
> You can completely avoid this problem by listing them as bit masks:
>
> 0x00000002:
> Logical channel when unset
> Physical channel when set
> 0x00000004:
> Direction from device when unset
> Direction to device when unset
> ...
>
> > + dmas = <&dma 13 0 0x8>, /* Logical - DevToMem */
> > + <&dma 13 0 0x4>; /* Logical - MemToDev */
>
> The bit in the example no longer matches the description.
>
> > +
> > + switch (D40_DT_FLAGS_DIR(flags)) {
> > + case 0: cfg.dir = STEDMA40_MEM_TO_MEM; break;
> > + case 1: cfg.dir = STEDMA40_MEM_TO_PERIPH; break;
> > + }
>
> Same typo above.
>
> > + if (cfg.dir == STEDMA40_PERIPH_TO_MEM)
> > + cfg.src_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags);
> > + if (cfg.dir == STEDMA40_MEM_TO_PERIPH)
> > + cfg.dst_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags);
>
> You can fold these two into the switch statement above.

This is what happens when you rush a fixup. :)

I'll do it properly now.

--
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org â Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/