[PATCH 2/2] ARM: DT: tegra: pinctrl suspend resume hook

[Bibek Basu]

Make pinmux as the first node of tegra DT
so as to achieve pinctrl as last device to suspend and
first device to resume.

Signed-off-by: Bibek Basu <bbasu@xxxxxxxxxx>
---
 arch/arm/boot/dts/tegra114.dtsi | 12 ++++++------
 arch/arm/boot/dts/tegra20.dtsi  | 16 ++++++++--------
 arch/arm/boot/dts/tegra30.dtsi  | 13 +++++++------
 3 files changed, 21 insertions(+), 20 deletions(-)

diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index a58a761..36596ae 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -11,6 +11,12 @@
 		serial3 = &uartd;
 	};
 
+	pinmux: pinmux {
+		compatible = "nvidia,tegra114-pinmux";
+		reg = <0x70000868 0x148		/* Pad control registers */
+		       0x70003000 0x40c>;	/* Mux registers */
+	};
+
 	host1x {
 		compatible = "nvidia,tegra114-host1x", "simple-bus";
 		reg = <0x50000000 0x00028000>;
@@ -165,12 +171,6 @@
 		interrupt-controller;
 	};
 
-	pinmux: pinmux {
-		compatible = "nvidia,tegra114-pinmux";
-		reg = <0x70000868 0x148		/* Pad control registers */
-		       0x70003000 0x40c>;	/* Mux registers */
-	};
-
 	/*
 	 * There are two serial driver i.e. 8250 based simple serial
 	 * driver and APB DMA based serial driver for higher baudrate
diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi
index a5a9615..6d8a663 100644
--- a/arch/arm/boot/dts/tegra20.dtsi
+++ b/arch/arm/boot/dts/tegra20.dtsi
@@ -12,6 +12,14 @@
 		serial4 = &uarte;
 	};
 
+	pinmux: pinmux {
+		compatible = "nvidia,tegra20-pinmux";
+		reg = <0x70000014 0x10   /* Tri-state registers */
+		       0x70000080 0x20   /* Mux registers */
+		       0x700000a0 0x14   /* Pull-up/down registers */
+		       0x70000868 0xa8>; /* Pad control registers */
+	};
+
 	host1x {
 		compatible = "nvidia,tegra20-host1x", "simple-bus";
 		reg = <0x50000000 0x00024000>;
@@ -196,14 +204,6 @@
 		interrupt-controller;
 	};
 
-	pinmux: pinmux {
-		compatible = "nvidia,tegra20-pinmux";
-		reg = <0x70000014 0x10   /* Tri-state registers */
-		       0x70000080 0x20   /* Mux registers */
-		       0x700000a0 0x14   /* Pull-up/down registers */
-		       0x70000868 0xa8>; /* Pad control registers */
-	};
-
 	das {
 		compatible = "nvidia,tegra20-das";
 		reg = <0x70000c00 0x80>;
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 9f33086..b4b79f0 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -12,6 +12,13 @@
 		serial4 = &uarte;
 	};
 
+	pinmux: pinmux {
+		compatible = "nvidia,tegra30-pinmux";
+		reg = <0x70000868 0xd4    /* Pad control registers */
+		       0x70003000 0x3e4>; /* Mux registers */
+	};
+
+
 	host1x {
 		compatible = "nvidia,tegra30-host1x", "simple-bus";
 		reg = <0x50000000 0x00024000>;
@@ -216,12 +223,6 @@
 		interrupt-controller;
 	};
 
-	pinmux: pinmux {
-		compatible = "nvidia,tegra30-pinmux";
-		reg = <0x70000868 0xd4    /* Pad control registers */
-		       0x70003000 0x3e4>; /* Mux registers */
-	};
-
 	/*
 	 * There are two serial driver i.e. 8250 based simple serial
 	 * driver and APB DMA based serial driver for higher baudrate
-- 
1.8.1.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/